Question about HP 1050 Plain Paper Inkjet Fax

1 Answer

HP Deskjet 1050 J410 series errors!

Following errors, Paper jam tried blowing air, cleaning the rollers (hard to clean no back to take off to get in there) also ink error/damaged error took them out looked at them look fine they are band new. so ... ? Tried all the steps in the HP website to get it to print will not print a test page at all, will only grab paper a little and then it stops. Power button blinking. Have Windows 8 This worked fine in Windows Xp. Please help!

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • HP Master
  • 2,075 Answers

Try to factory reset the printer following the OM for the model.

Posted on Jul 02, 2017

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
checkitright

CheckitRight

  • 1363 Answers

SOURCE: HP fax 1020

try cleaning with alcohol if it doesn't work then yes it needs to be replaced

Posted on Aug 12, 2008

Anonymous

  • 53 Answers

SOURCE: HP 640 Fax series not printing

If it is a color printer, try printing just grayscale or black& white.  It is is already set to print just b/w, try printing in color.  Basically you may be out of ink.  Run the printer utility to clean the heads and see if anything changes.  A new set of cartridges should fix the problem, I believe.
Hope this helps...
~enov8

Posted on Mar 07, 2009

Anonymous

SOURCE: busy, try later error won't go away

depending what rollers and how you did it, you probably have 'spun' a clutch out of position so it can't find it's 'home" position, and keeps on trying. If it worked before cleaning and now it doesn't you've definitely broken or dislodged something like that.

Posted on May 28, 2009

Anonymous

  • 1 Answer

SOURCE: hp 1040 ran out of paper/after restocking now prints blank pages

Even though the toner was shown at 1/2, I had the fax machine operator install a new cartridge. Problem solved!

Posted on Aug 25, 2009

Anonymous

  • 1 Answer

SOURCE: My fax won't print, neither faxes nor copies. The

Though the ink level it said was "6 / 8", when I removed the cartridge to examine it looked bone dry empty to me. I replaced the ink cartridge. It works fine, and reports the ink level as "8 / 8".

Posted on Sep 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Errors with my Printer/scaner


Jessica:

This could be one of a few things... First, Windows 8 is a completely different animal from Windows XP! Try reloading your printer driver in Windows 8. If this doesn\'t work, you need to clean the paper pickup rollers at the front of the printer (where the paper first feeds into the machine. I use a Q-tip moistened (not sopping wet) with rubbing alcohol... gently scrub the whole pickup roller and then the feed roller next to it. Check carefully (with a flashlight) for any shards of paper that might be blocking the paper path. There is also a sensor flag (small finger of plastic) sticking up that the paper must hit to let the printer know that the paper is feeding through. If you do not see the sensor flag, it is either jammed or has been broken off when a piece of paper was pulled backward out of the paper feed area. First reload the printer driver, and try to print. If it doesn\'t print, check and clean the rollers and look for the sensor flag.

May 31, 2014 | HP 1050 Plain Paper Inkjet Fax

1 Answer

I have a HP LaserJet 1312nfi that is giving me a FALSE paper jam message. I repeat - FALSE PAPER JAM IN BACK DOOR. False false false. I have uninstalled it on my computer and nothing. I have opened it...


Hello Chris! Welcome to FixYa!

If you are facing False Paper Jam error in your HP Laser Jet 1312nfi but If you cant see any obvious paper jams, try to look closely into the rollers or the inside. There could be some tiny paper shreds stuck within those rollers. Or there could be a tiny piece of paper blocking the printer's sensor and thus giving you a false paper jam error.
The rollers should be cleaned if the paper fails to feed smoothly into the unit. All document and media rollers should be cleaned using a lint-free cloth lightly moistened with water.

1. Turn Off the printer and unplugged power before cleaning the rollers. This will allow the rollers to be turned by hand in most cases.
2. Remove the rear access door to access the rollers. Clean any dust and debris from the rollers.
3. Open the back of the printer and check metal paper rollers (not the rubber rollers) in the interior of the printer. They should be clean and move freely. If these are not bright and shinny or have buildup on them, they should be cleaned. Also clean any dust and debris off of the rubber rollers.
4. Close the back cover and reattach the rear access door.
5. Plug the power cord back in and power the unit up. It should reinitialize for about 20 seconds.
6. Print another extended self-test page.
After following these steps carefully, False Error message will be disappeared.
I hope this solution helps you
Let me know if you have any confusion in your mind.


Sir, Your Rating as FIVE Stars for this solution and words of appreciation will be esteemed

Thank You for taking my service


Concerned: Muhammad Uzair

Jan 10, 2012 | HP Officejet Pro L7680 All-In-One Printer

1 Answer

Hp deskjet 1050 all-in-one J410 series can not connect to computer to print can u help


First install the drivers on the CD previous to plug the printer into the computer, then plug the printer.
Please let us know which error you get.

Mar 06, 2011 | HP Computers & Internet

1 Answer

A sheet of paper had remain in the cylinder


  1. Remove the rear cleanout from the printer.
  2. Gently remove any jammed paper or bits of paper.
  3. Close the HP Paper Feed Cleaning Kit software on the computer.
  4. Load plain paper in the printer paper tray.
  5. Press the Power button to turn the printer off.
  6. Press the Power button to turn the printer on.
  7. Try printing again. If the printer still does not pick up paper or if a paper jam occurs again, service the printer.


Other solutions customers found helpful » HP Paper Feed Cleaning Kit -- Clean the Paper Feed Rollers with the HP Paper Feed Cleaning Kit in Windows XP and 2000 » HP Deskjet, Photosmart, and PSC All-in-Ones -- 'Out of Paper' Error Message and the Printer Does Not Pick Up or Feed Paper » HP PSC 1600 and 2350 All-in-One Series Printers -- 'Paper jam: Press OK to continue' Message Displays on the All-in-One

Dec 15, 2010 | HP PSC 1610 All-In-One InkJet Printer

1 Answer

HP Deskjet F4185 series says a paper jam error everytime I print using a photo or matte paper.Everything is clean though so I don't know what to do with this error.


did your orinter experience a paper jam before?

try to clean inside again maybe there are small paper left inside

i hope this can help

Oct 12, 2009 | HP Deskjet F4180 All-in-One InkJet Printer

1 Answer

Hp 4250 tn when i try to print get an error 13.05.00 papper never makes it though the fuser


Error message means "Media is jammed at the specified location (and possibly at other locations). If the message persists after all jams have been cleared, a sensor or sensor lever might be stuck or broken."

For all jam messages, do the following: 1. Remove jammed print media from the specified location. Check the entire paper path for other pieces of media in the path. 2. Open and close the top cover to clear the message. 3. Check sensors and flags in the paper path for proper operation.

Try cleaning your feed rollers...
There are two types of rollers in printers: hard plastic and rubber. Plastic rollers can be cleaned with alcohol (isopropyl). Rubber rollers can be cleaned with a rubber roller cleaner and restorer like the one in the link (you can find other brands, but make sure its for rubber).

http://www.lmcomp.com/80008.html

Jul 27, 2009 | HP LaserJet 4250n Printer

1 Answer

Paper jam


Check for anything small stuck between the rollers, like a tiny fragment of paper, or any other debris. Clean it with a can of compressed air, if possible. Hold the printer upside down and gently try to shake off anything that may be inside. Sometimes you may have to dismantle the cover to check properly.
Clean the roller with a damp cloth and wait for the rollers to dry completely before trying to print again.
Make sure you have selected the correct paper type and quality from the printer properties.

Jun 02, 2008 | HP Deskjet 3845 InkJet Printer

Not finding what you are looking for?
HP 1050 Plain Paper Inkjet Fax Logo

Related Topics:

210 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Ekse

Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Cindy Wells

Level 3 Expert

6065 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...