Question about Kenmore 73952 Gas Dryer
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Listen very closely to the dryer right as your pushing start.Is there any sound at all.Listen very closely because its critical on making the diagnosis.
Posted on May 22, 2008
SOURCE: Kenmore electric dryer series 90
Check the automatic door shut off switch and wiring. When the door closes it actuates a switch (completes and electrical circuit) which allows the dryer to operate.
Posted on Dec 15, 2008
The Thermal Fuse is located on the air blower housing. Its a small white plastic component with two wire leads.
The Thermal Cut-Out (TCO) is located on the outside of the heater box on the end opposite the heating element terminals.
The reason I mention both these components is because some people confuse the two and use the words interchangeably. There is a difference between the two components and what they do.
DOUBLE CHECK YOUR SYMPTOMS:
If your dryer does not run at all, check your Thermal Fuse.
If your dryer runs, but does not heat you need to check the Thermal Cut-Out.
If you have any questions, please post back and let me know what symptoms you are having. Please include your complete model number (located on a nameplate around the door opening) so that I can determine how your dryer is configured. I hope this is helpful to you.
Posted on Jan 08, 2010
Tips for a great answer:
Apr 21, 2012 | Kenmore Dryers
Jul 01, 2010 | Dryers
Mar 19, 2010 | Kenmore Dryers
Dec 23, 2009 | Kenmore 63942 Dryer
Aug 23, 2008 | Kenmore 62602 Electric Dryer
78 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: