Question about HP LaserJet M4345 MultiFunction Printer
Posted by Anonymous on
Resetting the HP LaserJet Pro M1536dnf accomplishes the following:
HP Printer Support
Posted on Jun 10, 2014
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
If your printer is connected in the Network and you are able to print fine than there is no communication Error.
In htan case if you are not able to scan then you need to upgrade the firmware of the printer and install it and i m sure your printer wiill scan scanning on the Network.
Mentioned below is the link to download the latest firmware of the printer.
However before you start sending firmware to the printer you need to make sure that printer driver is installed on the PC.
Thanks and Regards
Posted on Jul 01, 2009
SOURCE: HP Laserjet M2727nf Mfp.
Turn off printer. Hold the CANCEL and > buttons, and turn on printer. When you see Permanent Storage Init release the two buttons. When the process completes you will see the ready message. This will reset ALL menu settings. If you screwed up the firmware update, you will have to replace the formatter. The NVRAM reset won't help you!!!
Posted on May 17, 2010
restart the printer hold down 6 when backlight illuminateshold till all three lights turn on,relese 6 keythen press 3 or 9 to scrool
press 6 to select the optionu want then enter cold reset starts......
Posted on Jul 14, 2010
Tips for a great answer:
Jul 28, 2016 | HP Office Equipment & Supplies
Dec 13, 2015 | HP Office Equipment & Supplies
Mar 06, 2014 | HP LaserJet Pro M1536dnf Multifunction...
Jul 14, 2010 | HP LaserJet 4730 MFP Printer
May 07, 2010 | HP LaserJet M4345 MultiFunction Printer
Dec 16, 2009 | HP LaserJet M4345 MultiFunction Printer
4,438 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: