Question about Linksys WRT160N Wireless Router
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
open internet explorer or firefox and in the address bar enter
192.168.1.1 and press enter
then it will prompt you for a username and password
ignore the username field and enter the password as admin and click on ok or press enter.
This should take you to the configuration page.
go to the linksys site for your router here
Click on user guide - you will need adobe reader to open this so if you dont have adobe reader then you will need to install it.
Once installed you should be able to open the user guide which will walk you through how to configure the router with regards to wireless etc.
Posted on Apr 11, 2009
Wrt160N router has some issues with the firmware .
Try to upgrade the Firmware of the router.
For that you will need to download the firmware form the web site.
open the set up page of the router.
under administration TAB you will find Firmware upgrade SUB TAB.
go to that tab . select the firmware file that you have downloaded.
and upgrade the firmware.
Click Here for more info about how to open the set up page of the router and other networking info
Posted on Oct 12, 2009
SOURCE: ps 3 linksys 160n problem
In order to use PS3 we need to open few ports. Kindly follow the steps:
1.Open the internet explorer and type 192.168.1.1 and hit enter.
2. If you have not changed the default password of the router then kindly leave blank the username box and in the password box type admin and hot enter.
3.In the setup page click Application and Gaming
4. Under that click Port Range Forwarding.
Below are the port numbers which we need to open for PS3
Now please type these port number in start and end port. Please make sure start and end port has to be the same.
First enter the TCP ports in first three boxes and then UDP ports in next three boxes.
Save the settings and turn off the router for 10 seconds and restart again.
Posted on Mar 19, 2010
You have WRT160N router. This router has issues with the Firmware. Firmware is the software of the router.
Try to upgrade the firmware of the router.
Is there any computer connected to the router with the cable.
If not then you will need to connect the computer to the router.
Download the firmware of the router from the manufacturer's website.
enter the model number. select proper version number and download the firmware of the router.
Once you download the firmware, you will need to open the router set up and upgrade the firmware of the router.
After upgrading the firmware, it is recommended that you reset and reconfigure the router.
Click Here for more information about router and networking
Posted on Apr 23, 2010
Tips for a great answer:
Aug 30, 2011 | Linksys WRT160N Wireless Router
Mar 15, 2011 | Linksys WRT160N Wireless Router
Sep 15, 2010 | Linksys WRT160N Wireless Router
Apr 13, 2010 | Linksys WRT160N Wireless Router
Feb 04, 2010 | Linksys WRT160N Wireless Router
Dec 23, 2009 | Linksys WRT160N Wireless Router
Dec 22, 2009 | Linksys WRT160N Wireless Router
Oct 28, 2009 | Computers & Internet
Jun 07, 2009 | Linksys WRT160N Wireless Router
97 people viewed this question
Usually answered in minutes!