Question about Brother DCP-8020 Laser Printer

Open Question

BROTHER DCP 7030 machine ERROR 6A? - Brother DCP-8020 Laser Printer

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
Mix-it-up

Mix-it-up

  • 832 Answers

SOURCE: machine error A7 ( brother dcp 115c )

Did you change the scanner cover? This happens when a wrong cis type is installed. The rom data has to be set again (this can only be done by service personal)

Posted on Nov 10, 2007

Ad

Anonymous

  • 1 Answer

SOURCE: machine error code 6A what that means?( Brother mfc 8440)

I argued on the phone with a BROTHER REP. that he should give the codes and directions to reset the machine, he refused time and time again, saying that this means physical damage to the machine an re-setting it is impossible to help, but i insisted, and it did fix the problem and the error went away.
here is what you should do, unplug for 10 sec. press and hold on the menu key while you plug it back in untill you see the screen "parameter init" press 99 and wait, this is what i did and it fixed the problem !!

Posted on Apr 08, 2010

Taborah

Ayotemi Folarin

  • 118 Answers

SOURCE: dcp 7030 error toner replace..

the printer needs to be clean and restore the factory settings

Posted on May 12, 2010

djzlelliott

  • 1 Answer

SOURCE: i have a printer dcp 7030 brother company i am

I just had this problem and fixed it. The original toner cartridge that comes with the printer cannot be reset. You have to buy at least one new cartridge. The reason is that the original cartridge that comes with the printer doesn't have a reset flag. You can, however, refill/reset a cartridge that you buy separately. Pull out the drum and lift the cartridge out of the drum. Hold the handle and look on the left end. You should see a crescent shaped hole with a white flag/lever. To reset this, move the white flag all the way to the left (I had to use something to push it). Put it back into the printer and voila - it fixes itself. Then, after the printer has been reset, you can use the original cartridge again, if you want. The flag part won't matter once the printer has been reset. I hope this is clear. I know it worked for me, and I had the exact same problem.

Posted on Sep 21, 2010

ikkenom

  • 10406 Answers

SOURCE: brother dcp 7030 printer could

> toner life end

Replace (not refill) the toner-cartridge.

Posted on Jan 15, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Brother DCP 8020 Multi printer. Im getting machine error code A6. After replacing the fuser


This is what is written in my service manual for Error Code A6:

Error code 6A
Print Unable 6A
Turn the power off and then back on again.
Fuser unit failure (The side thermistor does not detect 60degreesC within the specified time.)

Dec 05, 2012 | Brother DCP-8020 Laser Printer

1 Answer

Restart Brother DCP-7030


Remove the Drum and Reconnect it
Restart the printer
Please check the connections

Oct 01, 2012 | Brother DCP-7030 Digital All-in-One Laser...

1 Answer

My machine is not working with tray, it display jammed paper


machine tray will be clean .Printer fuser parts clean.plz tell me my cell no. 08273174139 vishal

Dec 07, 2011 | Brother DCP-7030 Digital All-in-One Laser...

1 Answer

BROTHER DCP 8020 ERROR 6A


A Brother MFC-8840D reported an Error 6A on the panel after a short power-outage that occurred. Calling Brother indicated that the error reflects that.

To clear the error, the procedure is as follows:
1. Turn off printer
2. Hold down MENU button on front panel and turn on power while continuing to hold.
3. Release button after 5 seconds (after the Please Wait message)
4. If error still occurs:
5. Press 91
6. If error still occurs:
7. Press 99

This should clear the error.

Good luck

Please rate FIXYA

Apr 07, 2011 | Brother DCP-8020 Laser Printer

1 Answer

Unable to print - error message: Clean Corona wire. Message returns even after cleaning wire


my pohto compy macine is not work now . Mo. no DCP-7030 , i rfill now toner error message is the clean the corona wire of drom unit a according front cover .

Nov 19, 2010 | Brother DCP-7030 Digital All-in-One Laser...

Not finding what you are looking for?

Open Questions:

Brother DCP-8020 Laser Printer Logo

Related Topics:

93 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1363 Answers

James Cagle
James Cagle

Level 2 Expert

482 Answers

Jim Keysor

Level 2 Expert

331 Answers

Are you a Brother Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...