Question about Sharp Aquos Televison & Video

Open Question

Lc 52d64u opc and power flashing

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 1 Answer

SOURCE: SHARP AQUOS LC-52D64U TV WITH NO POWER

I had one that was doing the same.   swapped out a back light inverter board... fixed it.  this doesn't mean that my fix will be your answer. to help find which one is of the 2 sides is bad..unplug power to the board one side at a time & half the lcd will fire up.  good luck

Posted on Apr 01, 2009

Ad

mahesh patel

  • 197 Answers

SOURCE: Sony LC-52D64U won't power on

bad power supply call sharp

Posted on Jun 07, 2009

Anonymous

  • 117 Answers

SOURCE: My Sharp Aquos LC-52D64U shut off by itself, and

sounds like power supply/ohm supplies for repair in uk

Posted on Nov 23, 2009

Chi Chu

  • 8457 Answers

SOURCE: no picture no sound opc light and power light

This is very common in sharp tvs.U turn it on.U get power on light stable right?U hear a click,one or twice,sometime tv is good right?Sometime POWER light and OPC light flashes?Push the power button on/off couples times will work, picture will come on.If keep trying off/on couples time after POWER and OPC flashes,don't ever stop and never get backlight and picture.Ur Video backlight board is dead must replaced.

Posted on Dec 28, 2009

Chi Chu

  • 8457 Answers

SOURCE: What is the TV Tuner Signal Board part number for the Sharp Aquos LC-52d64U?

That the board which it have a square aluminun box at the edge of the board with a rounded bolt sticking out for inputs like ANT. input and AV inputs for like wires components inputs like multi colors like YRW,YRWGP holes for AV inputs also have HDMI hubs inputs for the high Def Pic.There are 6 HDMI inputs hubs for the tv Sharp Aquos LC-52d64U.Tvs Tuner board signal boards are also have to been known names to called as the tvs Main Logic boards and the tvs Mother boards also.U are fixing ur tv u must have to take it parts already.U can also compare the pictures between the tv Tuner signal board u are taking aparts out of the tv and the tv Tuner signal board you are buying they'll look axactly alike.The sticker of the serial numbers of the boards a few numbers in the begining on the tv Tuner signal boards should be the same also.

Posted on Dec 06, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Model LC-465B57U flashing power light and opc light


Hi Tracy,
It appears your TV is not sequencing properly. By the order given in your instructions with the controller you are tuning, continue with a code until it satisfies .


Press setup- blinks twice. Enter TV manufacturer code- press enter. Light should flash once. Press on . After it works . Go through all the functions. Up- Down, loudness, channels,& on -off .


Fare .Well.

Dec 12, 2014 | Sharp Televison & Video

2 Answers

I have an aquios LC-42D64U which suddenly has the following two lights blinking power & OPC. They both blink, once together, the second blink is only the power, and repeating the sequence. I've...


Sharp LED/LCD EEP cleared Step 1 Remove Mains Plug 2 Press On/Off Switch from LED/LCD Panel 3 Press Ch Down & Input Switch together and plug in mains cord 4 LED/LCD will start 5 "K" will appier on Screen 6 Press Ch Down & Vol Down from LED/LED Panel 7 1/9 Page will appier on Screen 8 Go to 9/10 page by pressing Up & Down arrow of remote 9 Select EEP Cleared 10 Press ok button from remote 11 On Screen dispay EEP running 12 Remove Mains Plug after complete EEP Run 13 Restart LED/LCD

Feb 05, 2011 | Sharp Aquos LC-46D62U 46 in. LCD HDTV

1 Answer

MY Sharp LC46D62U wont turn on


Power and OPC LED lights flashes?Common on Sharp LCD tv.Tv is still useable.Tv have Tuner signal board problems.Every times Power and OPC LED lights flashes.Just push the remote power button again and wait.Sometimes Power and OPC LED light will flashes require push power again wait again Power and OPC will flashes two or three time push power button and wait.Must do this two or three time before the backlight will light up and tv work.

Jan 07, 2011 | Sharp Aquos LC-46D62U 46 in. LCD HDTV

1 Answer

Tv wont turn on used it for two months and one day it turns on then the power led light flashes and the opc led light ...


This tv still under warrenty?Yes take ur warrenty repair.This problems very common on Sharp LCD tvs.I have one too.This tv have a Tuner signal board problems.But this tv still use able.Just push power button again after the POWER and OPC flashes.POWER and OPC some will flashes again and wait just push the power button again and wait.Sometimes have to push power buttons and wait power button push out of three or four times power button push POWER and OPC flashes.Than tv will work again.

Jan 06, 2011 | Sharp LC-52D64U 52 in. LCD HDTV

1 Answer

Tv power led flashing 2 times and opc led flashing 1 time over and over thats it thats all i get


U can tries push the power button again to recycles each times the POWER AND OPC flashes.Do it at lest 4 or 5 times to recycles each time the POWER AND OPC flashes,might have the backlight on and the tv work again.U have to do this all the times now.Do this and don't work.Ur tv the Tuner board is dead.This board,is the board that take the incomming broscast signal cable connected to this board.Tries Websites like Shopjimmy.com,Ebay.com to buy a refurbish Tuner board for the replacement.

Jun 12, 2010 | Sharp Aquos LC-42D62U 42 in. LCD HDTV

1 Answer

THE TV IS CUTTING OFF BY ITSELF AND THE OPC LIGHT IS BLINKING


This problems very common on Sharp Tv.Do ur tv LED power light turn on solid first.Few mins,than LED,OPC flahes.Power LED,OPC flashes,push power button again,do this at leat 5 or 6 times somtimes the backlight will come back on and work.The power LED,OPC light flashes,turn off/on more than 5 or 6 times don't work.Ur Tuner signal board is dead,must replaced.

Mar 30, 2010 | Sharp Aquos LC-42D62U 42 in. LCD HDTV

1 Answer

Aquos has the power light and OPC light flasing but nothing works


First turn on power light stable at all?Power and OPC lights well flash,but push on/off power button do this couple times after the Power and OPC flashes well backlight come back on well work.This problem very common is Sharp tv.

Jan 17, 2010 | Sharp Aquos LC-46D62U 46 in. LCD HDTV

2 Answers

No picture no sound opc light and power light


This is very common in sharp tvs.U turn it on.U get power on light stable right?U hear a click,one or twice,sometime tv is good right?Sometime POWER light and OPC light flashes?Push the power button on/off couples times will work, picture will come on.If keep trying off/on couples time after POWER and OPC flashes,don't ever stop and never get backlight and picture.Ur Video backlight board is dead must replaced.

Dec 28, 2009 | Sharp Aquos LC-46D62U 46 in. LCD HDTV

3 Answers

OPC/DL light flashing Same problem of black screen and green lights flashing at power and OPC Help....


WHEN FLAT SCREEN SHARP LCD IS ON .. BLIKNING ON BOTTOM OF SCREEN SAYS OPC

Dec 08, 2008 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76177 Answers

Cindy Wells

Level 3 Expert

6048 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Sharp Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...