Question about Krups Small Appliances Espresso Machine

Open Question

Krups Espresso has no text in display - there is light but no letters

There is only light in the display, we are not able to se what to choose, coffee, espresso and so on . What can be wrong, if it is a card that need replacement, can we do it ourselves

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 3 Answers

SOURCE: instructions for Krups Gusto espresso maker

I found the manual on an Amazon.com site for the Krups Gusto espresso maker (January 2009)

http://ec1.images-amazon.com/media/i3d/01/A/man-migrate/MANUAL000052280.pdf

Posted on Jan 18, 2009

Ad

Anonymous

  • 54 Answers

SOURCE: Espresso maker doesn't work properly

It is clear that there is a problem with water supply. Check if pump works, if it does, there is blockage in water supply to pump. Check and clean.

Posted on Jul 11, 2009

Tom Torre

  • 279 Answers

SOURCE: Krups XP5020 manual

Try Krupsusa.com and click on "instructions" they have it there.

Posted on Sep 18, 2009

Sergio M Perez

  • 39 Answers

SOURCE: I have a Krups xp2070 that sends hot water to the

The unit has two pressure valves that control release to the drip tray. Once they fail the hot water will go directly to the drip tray when the pressure goes up. The fix will be to replace the pressure valves (pair in series) which only cost about $20. I replaced mine and it fixed the problem. Good luck and happy espressos.

Posted on Dec 30, 2009

Testimonial: "Thanks! Very helpful. Now we can (probably) solve a problem that will bring espresso back into our lives!"

vinace99

  • 3 Answers

SOURCE: No espresso coming out.

The problem with the XP4050 is the two safety valves that the water goes trough on its way to the coffee head. They are plastic and some of the parts will just become brittle because of the hot water and the contamination they gather. With my XP4050 they just broke and parts of it were in the rubber tubes that go to the waste tank.They are also very cheaply constructed compared to the more robust parts of this machine. The water to the hot water/steam head does not have these valves and has a completely different routing. I am currently trying to fix the machine with just one valve and parts of the two valves that are still good. Fingers crossed....

Posted on Jul 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Coffee side beeps 3 times and does not brew. Espresso side and frother are fine


KRUPS XP2280 Espresso Machine and Coffee Maker ...

www.amazon.com/KRUPS-Espresso-Combination.../B...

Amazon.com, Inc.KRUPS XP2280 Espresso Machine and Coffee Maker Combination with ... Theespresso side is literally idxxt proof with the built in tamper system and ... Theespresso does not brew after waiting for the light to turn solid and simply pushing 1 or two cup selection. I often have to push 3 or more times and it still doesn't work.Missing: beeps

KRUPS XP2280 Espresso Machine and Coffee ... - Amazon

uedata.amazon.com > ... > Espresso Machine & Coffeemaker Combos
Krups is pleased to present our new XP2280 Combi Espresso and Coffee ... Theespresso side is literally idxxt proof with the built in tamper system and ... Theespresso does not brew after waiting for the light to turn solid and simply pushing 1 or two cup selection. I often have to push 3 or more times and it still doesn't work.Missing: beeps

Troubleshooting Semi Automatic Espresso Machines

www.espressoplanet.com > Articles > Support > Troubleshooting
Oct 24, 2010 - We do not encourage anyone to open up the machines and try to repair them and if you ... (The water will be moving through the holes between the coffeegrounds ... The portafilter doesn't stay in place in the group head while brewing. ....Jura, Solis, Saeco, Krups, Capresso, Gaggia, Rancillio, Nespresso.Missing: xp2280 ‎side ‎times

Jan 28, 2016 | Krups XP2280 Combi Espresso & Coffee...

2 Answers

LCD display has stopped working


More than likely only a new display will fix it, it is that whole front silver panel with the buttons and display plus a big part of the wiring loom going lots of places inside the machine.

Apr 09, 2013 | Krups Super Automatic XP 9000 Espresso...

2 Answers

Directions on how to use a KRUPS type 963/b expresso machine


Hi,
Unfortunately there is no result on Krups website for 963/b espresso machine. However, if you browse to the website: www.krups.com and choose any of the customer support options, l am sure they will be glad to assist you.
Best wishes,
Graemevm

Dec 23, 2009 | Coffee Makers & Espresso Machines

2 Answers

A Krups KM7005 coffee maker/grinder doesn't heat or drip water .


Mine had the same problem ... all the lights are on, grinding works fine, but no heat on the plate, and no dripping of water.

After a weekend on the workbench, I mastered this machine. The KM7005 has 2 x MicroTemp G4 thermal cutoff (TCO) fuses which interrupt the Live line, for overheat protection. Mine didn't overheat per se, but the TCO blew anyway. Not reset-able ... need to be replaced with a soldering iron. To date, I have helped 13 people on this site fix this exact problem.

I'll be happy to advise you to fix this, or fix it for you. Write me at KM7005@flightsystems.biz.

Dec 16, 2009 | Krups Small Appliances Espresso Machine

1 Answer

My Krups KP 2070 is less than a month old and the diplay has gone blank. Can I order another one and replace it?


You may have a faulty power module which provides the power to the display module. You can call one of the service centers listed by Krups and they will sell you the power module kit ($50-55) which includes the display control module. I think they also sell the display control module by itself but most likely it is the power module board that failed. Replacing the control module is rather difficult. Ask Krups for a warranty repair but if you decide to do the repair yourself it makes sense to just replace the power board and see if the old display module works.

Nov 19, 2009 | Krups XP2070 10 cup Coffee Maker/15 bar...

1 Answer

My Krups combo espresso/ coffee maker xp2070 will not turn on at all. No blue light when hit either start/stop button.


Do you have power to the control module? Can you set the time or is the display completely dead? Mine was completely dead and I replaced the power module and the display/control module.

Sep 13, 2009 | Krups XP2070 10 cup Coffee Maker/15 bar...

1 Answer

Krups km7005 water not heating nor hot plate


Mine had the same problem ... all the lights are on, but no heating on the plate, and no dripping of water.

After a weekend on the workbech, I've mastered this machine. The KM7005 has 2 x MicroTemp G4 thermal cutoff (TCO) fuses which interrupt the Live line, for overheat protection. Mine didn't overheat per se, but the TCO blew anyway. Not reset-able ... need to be replaced with a soldering iron. I'll be happy to advise you to fix this, or fix it for you. Write me at KM7005@flightsystems.biz.

Aug 01, 2009 | Krups Small Appliances Espresso Machine

3 Answers

Krups model KM7005 water wont heat


Mine had the same problem ... all the lights are on, but no heating on the plate, and no dripping of water.

After a weekend on the workbench, I've mastered this machine. The KM7005 has 2 x MicroTemp G4 thermal cutoff (TCO) fuses which interrupt the Live line, for overheat protection. Mine didn't overheat per se, but the TCO blew anyway. Not reset-able ... need to be replaced with a soldering iron. I'll be happy to advise you to fix this, or fix it for you. Write me at KM7005@flightsystems.biz.

Jun 02, 2009 | Krups Small Appliances Espresso Machine

2 Answers

Krups model KM7005 water wont heat


Mine had the same problem ... all the lights are on, but no heating on the plate, and no dripping of water.

After a weekend on the workbench, I've mastered this machine. The KM7005 has 2 x MicroTemp G4 thermal cutoff (TCO) fuses which interrupt the Live line, for overheat protection. Mine didn't overheat per se, but the TCO blew anyway. Not reset-able ... need to be replaced with a soldering iron. I'll be happy to advise you to fix this, or fix it for you. Write me at KM7005@flightsystems.biz.

Apr 10, 2009 | Krups Coffee Makers & Espresso Machines

Not finding what you are looking for?
Krups Small Appliances Espresso Machine Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Krups Coffee Makers & Espresso Machines Experts

Pierre Laplante

Level 3 Expert

2042 Answers

Ray Murphy

Level 2 Expert

68 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Are you a Krups Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...