Question about Kenmore 73952 Gas Dryer

Open Question

How to replace ignitor kenmore elite dryer - Kenmore 73952 Gas Dryer

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
docjohn174

john gagnon

  • 943 Answers

SOURCE: Kenmore Dryer - Ignitor will not fire

thanks for the question The problem is with a thermal fuse located at the back remove back panel the thermal fuse is located on the air vent 2 small wires go to it replace it . And check the venting make sure the vent is clean because this termal fuse will break down because of poor venting Thanks for the question The appliance doc

Posted on Sep 11, 2008

Ad

jdthefixer

  • 746 Answers

SOURCE: either the thermal fuse or the ignitor on my kenmore elite gas dr

Remove the lower front cover - it has spring-loaded keepers that can be gently pryed and the panel should either hinge down or pop off. The thermal fuse and ignitor are behind this panel.

Posted on Mar 29, 2009

genebolte

  • 1 Answer

SOURCE: Error message F44 in a Kenmore Elite Dryer. What

F-44 indicates a faulty blower motor controller. $169.00 from sears
or about $115.00 from an appliance parts store. Also note: the
service technicians repair guide is usually folded and tucked inside the top of the dryer console. It contains all the F codes and disassemble and reassemble and testing instructions. Part # for the service guide is (W10035270).

Posted on May 15, 2009

blueextc3221

blueextc3221

  • 15935 Answers

SOURCE: need to disassemble a kenmore elite oasis dryer

#
1

Disconnect your Kenmore Oasis washing machine from its power source. Make sure that your washer is unplugged before beginning to disassemble it.
#
2

Remove the screws that hold the control console to the top of your Oasis washer. In some Kenmore Oasis models, the two screws may be covered by plastic end caps. After removing the screws, set them aside until you are ready to replace them.
#
3

Flip the console up, back and out of the way.
4

Locate the cabinet clips on the top of your Kenmore Oasis washer. These clips are located toward the back of the washer top and would be hidden by the console if it were not currently flipped up.
#
5

Slide your screwdriver underneath the metal cabinet clips. Wiggle the screwdriver back and forth to gently pry the cabinet clips free.
#
6

Disconnect the group of colored wires that plug into the top of the washer from the control console. These wires control the lid switch on your Kenmore washing machine. To disconnect, grasp the white plastic clip and pull gently.
#
7

Remove the washing machine cabinet. Tilt the cabinet towards you, and then lift the entire cabinet up and off of its platform.



Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Posted on Sep 27, 2010

blueextc3221

blueextc3221

  • 15935 Answers

SOURCE: kenmore elite he4 quiet pak 9 dryer display code

PF - Power Failure - PF error code indicates a power failure during the dryer's cycle. Press and HOLD start to continue the cycle, or press off/pause to clear display.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Posted on Sep 30, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a kenmore elite dryer model # 11070952990 that will not heat up, I replace the glow bar ignitor, I don't know what i'm missing.


Check the thermal fuse. You can temporarily bypass it by hooking its two wires together then see if it heats.

Sep 24, 2011 | Kenmore Elite Oasis 7808 Gas Dryer

1 Answer

My kenmore gas dryer wont heat....could it be the ignitor


if you do not hear a clicking noise with in 29 seconds upon starting it the ignitor is bad. the ckicking is the ignitor snapping a spark to the burner to light it up

Feb 24, 2010 | Kenmore Elite Oasis 7808 Gas Dryer

1 Answer

Sometimes does not ignite.


you have a bad timer rotory dial that will not pick up the signal for the ignitor to fire

Jan 30, 2010 | Kenmore 73952 Gas Dryer

1 Answer

Our Kenmore Elite Gas Dryer no longer has heat.


check that there is gas to the unit, check the ignitor it may be bad even if it does glow, finally check the solenoid that controls the element and gas valve. usually it is the ignitor

Jan 06, 2010 | Kenmore Dryers

1 Answer

Kenmore Elite HE4 gas dryer, no heat at all


The ignitor may be bad or the thermal fuse may be failed.

Aug 27, 2009 | Kenmore Elite HE4 Electric Dryer

1 Answer

Either the thermal fuse or the ignitor on my kenmore elite gas dr


Remove the lower front cover - it has spring-loaded keepers that can be gently pryed and the panel should either hinge down or pop off. The thermal fuse and ignitor are behind this panel.

Mar 28, 2009 | Kenmore Elite Oasis 7808 Gas Dryer

1 Answer

Kenmore elite gas dryer won't fire up


replace the coils on burner valve ..they will fail sometimes after initial heat up both are in kit change both

Jun 04, 2008 | Kenmore Elite HE4 Electric Dryer

1 Answer

Kenmore elite gas dryer


Does the ignition glow when you start the dryer? if so you have power to gas valve and ignition system. if not you may have an open thermostat or thermalfuse.

If the ignitor just sits there and glows all day, you have other problems, It could be a gas valve, or ignitor sensor.





Jun 04, 2008 | Kenmore Elite HE4 Electric Dryer

Not finding what you are looking for?
Kenmore 73952 Gas Dryer Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Dryers Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Ned Halaweh
Ned Halaweh

Level 2 Expert

239 Answers

jimorris77

Level 3 Expert

411 Answers

Are you a Kenmore Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...