Question about Samsung CLP320 AllInOne Laser Printer

Open Question

How to reset warnings (replace transfer belt...)

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you reset maintenance count on a dell 3130?


You don't. You can't.

When you install a replacement Transfer belt (it has it's own counter chip) that resets the transfer belt pagecount, and as a result clears any transfer belt life related warnings/errors.

When you install a REPLACEMENT Fuser (that has it's own counter chip) that resets the fuser pagecount, and as a result clears any fuser life related warnings/errors.

PLEASE NOTE - The fuser supplied with the DELL 3130 when new DOES NOPT have a counter chip - the fuser life warnigs are triggered by the printer pagecount. Installing a fuser from another printer (even if it has a ZERO pagecount WILL NOT reset the fuser pagecount (because the 'ship with' fuser has no counter chip.

Aug 27, 2014 | Dell 3130cn Color Laser Printer

1 Answer

My printer can`t print and shows me to 'Check the transfer belt'


Your printer monitors the life of your transfer belt. When the transfer belt reaches the end of its

life, the printer displays


80 Belt Exhausted. This message indicates it is time for you to

replace the transfer belt. For best print quality, make sure you replace the transfer belt when

the printer displays


80 Belt Life Warning.

Press


Go to clear the message. The Supplies message appears on the second line of the

display to remind you that supplies need attention. You can open the Supplies Menu to see

80 Belt Exhausted



or 80 Belt Life Warning messages.

The printer continues to display the


Supplies message until you replace the transfer belt. To

replace the transfer belt, use the following steps or the instruction sheet supplied with the
transfer belt.

Nov 26, 2012 | Samsung CLP-610 Series

1 Answer

Have a transfer belt error What to do?


To fix this error, you will need to replace the transfer belt and/or reset the transfer belt count on your printer. If you are happy the the print quality of the printer, then you can try to reset the transfer belt count and that will clear the error. Otherwise you need to get a replacement transfer belt and swap it out before resetting the count.

To remove your existing transfer belt, you need to open the front panel, and remove the imaging unit by pulling the green handle. The belt is located above the imaging unit. Pull the belt down to release and then pull it straight out of the machine. Take your new belt and slide the back into the machine and push the front of the belt up to lock in place. Then you need to reset the belt count.

To do this, follow the steps below.

1. Enter Tech Mode by pressing [MENU] [#] [1] [9] [3] [4]
2. If you do not see the Tech Mode menu press the menu button again. (You need to enter the key sequence quickly.)
3. Select Tech Menu
4. Select DataSetup
5. Arrow to Clear Counts and press OK
6. Enter Password 1934
7. Arrow to Transfer Belt and press OK.

Hope this helps you.

Apr 02, 2011 | Samsung CLX 3160fn All-In-One Printer

1 Answer

How to fix transfer belt error in my samsung CLX3160fn


To fix this error, you will need to replace the transfer belt and/or reset the transfer belt count on your printer. If you are happy the the print quality of the printer, then you can try to reset the transfer belt count and that will clear the error. Otherwise you need to get a replacement transfer belt and swap it out before resetting the count.

To remove your existing transfer belt, you need to open the front panel, and remove the imaging unit by pulling the green handle. The belt is located above the imaging unit. Pull the belt down to release and then pull it straight out of the machine. Take your new belt and slide the back into the machine and push the front of the belt up to lock in place. Then you need to reset the belt count.

To do this, follow the steps below.

1. Enter Tech Mode by pressing [MENU] [#] [1] [9] [3] [4]
2. If you do not see the Tech Mode menu press the menu button again. (You need to enter the key sequence quickly.)
3. Select Tech Menu
4. Select DataSetup
5. Arrow to Clear Counts and press OK
6. Enter Password 1934
7. Arrow to Transfer Belt and press OK.

Hope this helps you.

Feb 27, 2011 | Samsung CLX 3160fn All-In-One Printer

1 Answer

We are receiving a replace transfer belt notice on our Samsung CLP610ND. Is there a way to reset without replacing?


no it cannot be reset without replacing. the transfer belt has done its life thats why the message is appearing on the screen to replace it. the printer can still be used. the transfer belt is a bit expensive a s well.

Jan 04, 2011 | Office Equipment & Supplies

1 Answer

I am getting a transfer belt warning message


The transfer belt may have reached its life expectancy now. You need to replace the transfer belt soon. Hope this helps. If you need more assistance, leave a comment and I'll get back to it. Thanks.

May 10, 2010 | Lexmark C522n Laser Printer

1 Answer

My window is showing "replace transfer belt soon" what is that and where is it and where do you find a transfer belt?


When transfer belt count 60.000 image need to reset.
Transfer belt (and other consumables) reset follow this procedure:

1. go in tech mode:
Press consistently menu -> # -> 1934 -> menu
2. in tech mode find ->consumables counter -> transfer belt ->reset
3. after 20 sec. power off and power on

If this not help try this:
1.MENU # 1934 MENU
2.Tech Mode (not User Mode)
3.DataSetup
4.Clear All Memory

Oct 27, 2009 | Samsung CLX 3160fn All-In-One Printer

1 Answer

Replace transfer belt warning came up - we did that and the warning is still there-won't let me print


a transfer belt turns the image drum moving the paper if you have a large spool of unfinished print jobs the printer will not reset
unplug the power and, print cable and then after 5 minutes connect the printer while you are waiting check the computer and, remove all waiting print jobs the printer should restart as a "new" printer

Aug 31, 2009 | Office Equipment & Supplies

2 Answers

Lexmark C522n Laser Printer stating "83 replace transfer belt"


how do you reset the transfer belt of a Lexmark C522 colourlaserjet.

Thanks
Alex

Mar 18, 2009 | Lexmark C522n Laser Printer

Not finding what you are looking for?
Samsung CLP320 AllInOne Laser Printer Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1363 Answers

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers

jasbo
jasbo

Level 3 Expert

2239 Answers

Are you a Samsung Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...