Question about Hitachi DZ-MV730A DVD Camcorder

Open Question

How do i stop the access card from blinking - Hitachi DZ-MV730A DVD Camcorder

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Access lamp is blinking.


What is your cards Class(you can read it on the card) If it is less than 6 you better change it to 10

May 31, 2014 | Canon EOS 600D Rebel T3i Digital Camera

1 Answer

Camera is frozen on last pic in on position


As soon as the camera memory access light stops blinking, and you can't switch of the camera, remove the battery. After a few seconds reinsert the battery and switch on the camera again. As long as the memory card is not fled, the camera should come on and work normal. Only is the error keeps coming back, you should contact a Nikon certified service centre closest to you.

Feb 15, 2014 | Nikon Coolpix S5200 Wi-Fi Digital Camera...

1 Answer

Ahoo.comhi my panasonic viera lcd tv model: TH- 42 U20S, was suddenly stopped working, because I inserted a memory card instead of SD card on it and suddenly the unit was shut down and the light started...


this appears to be a common problem from what i researched the only fix i have read about was removing the sd card. and unplug the tv for about an hour to reset it.

Mar 14, 2011 | Televison & Video

2 Answers

New Nikon d90 the memory access lamp does not stop blinking


I'm experiencing similar problem, but when i connect it to computer via USB , it seems to go away.
Problem resurfaced again after a week.

Jun 09, 2009 | Nikon D90 Digital Camera with 18-105mm...

2 Answers

Card Access lamp keeps blinking


Hi

It sounds like you have either intentionally or inadvertently set your camera to it's highest possible setting.
I believe this camera has a TIFF image capability, which takes beautiful shots , but each weigh in at a hefty 15mb or so, which takes the cameras processor a little more time (quite some time on my old Olympus Camedia 5000z) to process and ready itself for the next shot in memory, - whilst it will allow you to knock out a couple in a row, if you do so you are only compounding the issue by lengthening the queue in memory.

So, the easiest way to tell if you have set this is to just look how many shots you have available on the card, if this seems unusually low, then you have set the camera to TIFF mode or a very hi res JPEG. in which case you must press the settings button, the go left into the image size settings menu and change the image size back to the best setting for your cameras, which should be a mega pixel or so lower than it's maximum capability for the fastest and most capable daily use of the camera. between 2-4 mega pixels is usually fine for domestic and family snaps that are still very printable. save the hi settings for the broad landscapes and super close Macros, then you really see the cameras capabilities shine!:-)
Highest resolution is fantastic, but slow -as you have noticed - and best saved for the occasional macro on a tripod.

I hope this solves your problem. Otherwise you can try formatting the card, they do often gather batches of small undeleted 'thumbnails' on Olympus cameras.

Also if the card is over 2-3 years old, you could well be right in your assumption that it needs replacing, in which case you will be pleasantly surprised how cheap they have become for much larger capacity cards.

All the best and happy snapping!.


May 09, 2009 | Olympus FE-270 Digital Camera

1 Answer

Memory access lamp flashes


WHEN POUTTING INN A MEMORY CARD ON NIKON DSLR CAMERAS THE GREEN LIGHT WILL BLINK ONE TIME .
IF IT CONTINUES TO BLINK THE CARD COULD BE BAD AND TRY TO FORMAT IT .
ALSO YOU COULD HAVE A BAD COMPRESSION BOARD.

Oct 29, 2008 | Nikon D70s Digital Camera

1 Answer

Replaced Lamp & yellow light indicator blinking. Still no picture


Good Day;
1. Check for an open AC fuse F9D00, if open check for a short on the 340v line to the lamp ballast between pin 1 an 5 at connector PL on the Power PCB, if shorted replace PWB-POWER LAMP (Ballast) part # 939P978010 and F9D00 part # 283D131040 2. Check for open AC fuse F9D00 part # 283D131040, if open check for proper seating of connector K1 on the Power PCB
Dead unit wd52525 mits
NO POWER

1. Red status LED, self-diagnosis error 44, check for open F9A06 on the Power PCB part # 283P128050 on the Power PCB 2. Red lamp LED, self diagnosis error 34. Check for 5-volts DC at J-9 connector pin 1 and 2 on the Engine Driver PCB if missing replace the Power PCB part # 930B921002 3. LED stops blinking after 70 seconds of plug in but will not power on. This model is equipped with a keyboard lock feature, this can be mistaken as a no power condition. To unlock the keyboard press and hold the "menu" button on the front panel for 10 seconds 4. LED stops blinking after 70 seconds of plug in but will not power on. Check for 3.2 volts DC at connector LE pin 3 and 4 on the Control PCB, if low suspect problems with the switches/buttons on the Control PCB part # 935D776001 5. LED stops blinking after 70 seconds of plug in but will not power on. Keyboard is not locked and key inputs at connector LE pin 3 and 4 check good. Suspect the E2P PCB part # 934C121001 6. (LED does not stop blinking after plug in) Disconnect the USB connector from the card reader to the front from the Chassis, if the LED stops blinking after 70 seconds replace the Card Reader part # 299P271010. 7. (LED does not stop blinking after plug in) Disconnecting the USB connector from the Card Reader did not help. Remove connector FC from the FMT PCB and plug the unit in, if the LED stops blinking after 70 seconds with FC removed suspect a problem on the FMT PCB (part # 930B924002), if the LED keeps blinking with connector FC removed suspect a problem on the DM PCB (part # 934C116002). 8. (LED does not stop blinking after plug in) On the DM PCB (part # 934C116002) check C81A2, C81A3, C81B3 and C81B4 (1000 UFD, 16V, 105C), if any are bad, replace all of them with part # 181P734030 (680 uFD, 16V, 105C). See Service Tip VS-78A 9. (LED does not stop blinking after plug in) On the FMT PCB (part # 930B924002) check C8F19, C8F21, C8F22, and C8F27 (16V 1000 UFD 105C), if any are bad, replace all of them with part # 181P734030 (680 uFD, 16V, 105C) See Service Tip VS-78A 1. Red status LED, self-diagnosis error 44, check for open F9A06 on the Power PCB part # 283P128050 on the Power PCB 2. Red lamp LED, self diagnosis error 34. Check for 5-volts DC at J-9 connector pin 1 and 2 on the Engine Driver PCB if missing replace the Power PCB part # 930B921002 3. LED stops blinking after 70 seconds of plug in but will not power on. This model is equipped with a keyboard lock feature, this can be mistaken as a no power condition. To unlock the keyboard press and hold the "menu" button on the front panel for 10 seconds 4. LED stops blinking after 70 seconds of plug in but will not power on. Check for 3.2 volts DC at connector LE pin 3 and 4 on the Control PCB, if low suspect problems with the switches/buttons on the Control PCB part # 935D776001 5. LED stops blinking after 70 seconds of plug in but will not power on. Keyboard is not locked and key inputs at connector LE pin 3 and 4 check good. Suspect the E2P PCB part # 934C121001 6. (LED does not stop blinking after plug in) Disconnect the USB connector from the card reader to the front from the Chassis, if the LED stops blinking after 70 seconds replace the Card Reader part # 299P271010. 7. (LED does not stop blinking after plug in) Disconnecting the USB connector from the Card Reader did not help. Remove connector FC from the FMT PCB and plug the unit in, if the LED stops blinking after 70 seconds with FC removed suspect a problem on the FMT PCB (part # 930B924002), if the LED keeps blinking with connector FC removed suspect a problem on the DM PCB (part # 934C116002). 8. (LED does not stop blinking after plug in) On the DM PCB (part # 934C116002) check C81A2, C81A3, C81B3 and C81B4 (1000 UFD, 16V, 105C), if any are bad, replace all of them with part # 181P734030 (680 uFD, 16V, 105C). See Service Tip VS-78A 9. (LED does not stop blinking after plug in) On the FMT PCB (part # 930B924002) check C8F19, C8F21, C8F22, and C8F27 (16V 1000 UFD 105C), if any are bad, replace all of them with part # 181P734030 (680 uFD, 16V, 105C). Good Luck, big IRISH.

Oct 04, 2008 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

Blinks


Good Day, michele9886;
There is a long process to go through to isolate the problem, but here you go:
1. Red status LED, self-diagnosis error 44, check for open F9A06 on the Power PCB part # 283P128050 on the Power PCB 2. Red lamp LED, self diagnosis error 34. Check for 5-volts DC at J-9 connector pin 1 and 2 on the Engine Driver PCB if missing replace the Power PCB part # 930B921002 3. LED stops blinking after 70 seconds of plug in but will not power on. This model is equipped with a keyboard lock feature, this can be mistaken as a no power condition. To unlock the keyboard press and hold the "menu" button on the front panel for 10 seconds 4. LED stops blinking after 70 seconds of plug in but will not power on. Check for 3.2 volts DC at connector LE pin 3 and 4 on the Control PCB, if low suspect problems with the switches/buttons on the Control PCB part # 935D776001 5. LED stops blinking after 70 seconds of plug in but will not power on. Keyboard is not locked and key inputs at connector LE pin 3 and 4 check good. Suspect the E2P PCB part # 934C121001 6. (LED does not stop blinking after plug in) Disconnect the USB connector from the card reader to the front from the Chassis, if the LED stops blinking after 70 seconds replace the Card Reader part # 299P271010. 7. (LED does not stop blinking after plug in) Disconnecting the USB connector from the Card Reader did not help. Remove connector FC from the FMT PCB and plug the unit in, if the LED stops blinking after 70 seconds with FC removed suspect a problem on the FMT PCB (part # 930B924002), if the LED keeps blinking with connector FC removed suspect a problem on the DM PCB (part # 934C116002). 8. (LED does not stop blinking after plug in) On the DM PCB (part # 934C116002) check C81A2, C81A3, C81B3 and C81B4 (1000 uFD, 16V, 105C), if any are bad, replace all of them with part # 181P734030 (680 uFD, 16V, 105C). See Service Tip VS-78A 9. (LED does not stop blinking after plug in) On the FMT PCB (part # 930B924002) check C8F19, C8F21, C8F22, and C8F27 (16V 1000 uFD 105C), if any are bad, replace all of them with part # 181P734030 (680 uFD, 16V, 105C).
Good Luck, Big Irish.

Jun 30, 2008 | Mitsubishi WD-52525 52" Rear Projection...

Not finding what you are looking for?
Hitachi DZ-MV730A DVD Camcorder Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Video Cameras Experts

Ekse

Level 3 Expert

13434 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

Al Rush

Level 2 Expert

270 Answers

Are you a Hitachi Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...