Question about Hobart H600 Stand Mixer
Posted by Anonymous on
I have an old (about 50 years) h600 1 phase motor for repairing, but unfortunately has no data label. Could someone post a pic? Thanks
Posted on Oct 31, 2015
Not sure if you are asking if an H600 is automatically a single phase or a 3 phase and the answer is NO. Depending on the motor it will be 1 phase or 3 phase application. It will have 4 wires versus 3 wires -- hope that makes sense 3 of the wires are "HOT" on a 3 phase and only 2 are "HOT" on a single phase Motor.
Posted on Oct 04, 2014
first thing, there is no 2 phase pwr. there are only single phase or three phase.you have 2 choices either you can convert mixer from 3phase to 1phase which will be expensive, or you can get a rotophase which will make 1phase pwr to 3phase pwr to run mixer, dont go with static phase inverter, only the rotophase inverter
Posted on Jan 19, 2010
SOURCE: I need a wiring diagram
You cannot wire a three phase motor for single phase and you cannot wire a single phase motor for three phase. If you have a three phase dual voltage motor your options are 220 or 440 volts. If you have a single phase dual voltage motor your options are 120 or 240 volts. A 208 volt Hobart motor will only function correctly on 208 volts and is not dual voltage.
Posted on Aug 13, 2010
Tips for a great answer:
Sep 05, 2011 | Hobart H600 Stand Mixer
May 13, 2011 | Hobart H600 Stand Mixer
Dec 08, 2010 | Hobart H600 Stand Mixer
21?2 H.P., Hobart designed, high torque ball bearing,
ventilated within mixer enclosure. Single-phase is
capacitor-start, induction-run type.
polyphase squirrel cage, induction-run type.
Single Phase 208V 20.0 Amps
240V 17.0 Amps
Three Phase 208-240V 8.6 Amps
Nov 26, 2010 | Hobart P660 Stand Mixer
Aug 05, 2010 | Hobart H600 Stand Mixer
Jan 19, 2010 | Hobart H600 Stand Mixer
Nov 29, 2009 | Hobart H600 Stand Mixer
647 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: