Question about Kodak EASYSHARE 5500 All-In-One InkJet Printer

Open Question

Photo tray jammed to rear ,cannot pull forward to utilize 8.5x11 paper tray

How do I disassemble to get to photo tray?

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hp c6180 won't print from 4x6 photo paper tray


If you put regular paper in the tray as it is asking does the printer use the regular paper to print the picture? If so, be sure the 4x6 photo paper tray (with photo paper) is pushed all the way in, and when you select print there should be an option (probably hidden in a submenu) to select the photo tray as the paper source. If you are printing from Adobe Acrobat, I have not found a reliable way to get the c6180 to use the photo paper tray. I hope this helps.

Jul 15, 2012 | HP Photosmart C6180 All-In-One InkJet...

2 Answers

Hi...I have a problem with my HP Photosmart C7280...can you help ? the error message "Photo tray problem" keeps coming up, telling me to "lift the output tray, push the photo tray all the...


Photo tray problem

' Lift the output tray up and verify that the photo tray

' is pushed in until it stops, then lower output all the

' way down. Press OK button on the printer to

'continue printing

HP Photosmart C7280 All-in-One Printer


1. Turn off printer.

2. Pull out paper tray and photo tray

3. Remove output duplexer (on back of printer)

4. Open input sheet feeder (on top of printer)

5. Open cartridge access door. (Basically lift up control panel and scanner section of the printer)

6. Turn on printer (Power button on now raised control panel)

7. Printer may display message "Performing printer alignment - Do not interrupt"

8. Wait for a few minutes until printer stops making all setup noises.

9. Close cartridge access door, close input sheet feeder, replace output duplexer, insert paper trays

10. Do a test print. All should be fine.

Mar 11, 2011 | Office Equipment & Supplies

1 Answer

How do you choose the tray to print from. Photo


Hi,

Yes there is.
You can see on the printer panel, there is a button for "photo tray".
If the light is "on" it means the button has been pressed and the printer will try to engage the photo tray in the next print job.

If the light is "off" it means the printer will ignore the photo tray.

Cheers,

Ed

Nov 07, 2009 | HP Photosmart D7360 All-In-One InkJet...

1 Answer

My photosmart 7150 prints half a page(vertical half) ! It worked fine before this. Help! thanks


Ok, I was having this same problem and the solution for me appears to lay in the fact that the "photo tray" was pushed in, signaling to the printer that it should print to the size specifications of a photo (approximately half the width of a standard letter page). I should also mention that with my problem, the printer would hang at every single print job--presumably to wait for you to input your photo paper--and that executing this fix solved the problem.
To fix this, I followed these instructions: SOLUTION:Follow the steps below to correct the issue:
  1. Disconnect power to the printer.
  2. Remove all photo paper from the Photo Tray.
  3. Push the Photo Tray completely into the printer.
  4. Snap the Photo Tray out (towards you) sharply.
  5. Reconnect power to the printer.
  6. Print a self-test on 8.5 X 10 paper.
  7. Engage the Photo Tray.
  8. From the Printer Toolbox, select Calibrate the Photo Tray .

Sep 26, 2009 | HP PhotoSmart 7150 InkJet Printer

1 Answer

HP photosmart 8250 wont print from photo tray.


Follow these steps in the order presented to resolve the issue. Step one: Reset the product
  1. While the product is still on, disconnect the power cord from the back of the product.
  2. Wait 30 seconds, and then plug the power cord into the back of the product.
  3. If the product does not automatically turn on, press the On (c01453128.gif ) button.
Step two: Check the condition of the paper and reload it
  1. Lift the photo tray lid.
  2. Slide the paper width guide all the way to the left.
  3. Remove the paper from the tray.
  4. Replace any ripped, dusty, wrinkled, or bent paper.
  5. Make sure that the stack of paper contains only one type of paper.
  6. Tap the paper stack on a flat surface to align the edges.
  7. Load photo paper with the print side down and short edge first into the photo tray. Slide the stack of photo paper forward until it stops. NOTE: If the photo paper has perforated tabs, load the photo paper so that the tabs are facing away from the product.
  8. Slide the paper width guide snugly against the paper. NOTE: Do not overload the photo tray. Make sure the stack of photo paper fits within the photo tray and is no higher than the top of the paper width guide.
  9. Lower the photo tray lid.
  10. Extend the paper catch.
  11. Try to print the job one more time.
  • If these steps resolved the issue , there is no need to continue troubleshooting.
  • If the issue persists , see the next step.
Step three: Choose the photo tray in the print driver settings
  1. Open the document to print.
  2. Click File , and then click Print . The Print window opens.
  3. Click Properties . The Properties window opens.
  4. Click Printing Shortcuts , and then click the shortcut you want to use.
  5. From the Paper source drop down list, click the paper source.
  6. From the Size is drop down list, click the paper size.
  7. From the Type is drop down list, click the paper type.
  8. Click OK , and then click OK again to print the document.
  • If these steps resolved the issue , there is no need to continue troubleshooting.
  • If the issue persists , try the following Workaround.
  • If these steps resolved the issue , there is no need to continue troubleshooting.
  • If the issue persists , see the next step.
Step four: Service the printer If you have completed all the steps listed above and are still experiencing a problem, service the product.

Sep 08, 2009 | HP Photosmart 8250 InkJet Printer

1 Answer

Disassembly of ice tray to replace icemaker auger


on sidebyside the tray should just pull out

Jun 26, 2009 | GE Refrigerators

1 Answer

Printing from the photo tray


I have found that when you put the photo paper in to the photo tray you have to slide the photo paper in to the printer gently as far as it will go, then slide the side and rear guides to the photo paper. If you just put the photo paper in to photo tray without doing this, the printer will not take up the photo paper at all.

Nov 01, 2008 | HP PhotoSmart 7760 InkJet Printer

2 Answers

Will not go to photo tray to print 4X6 picture


This is why Mac's are EVIL!!!! LOL, anyway try using the software, that comes with the printer, and tell it which paper type, and tray to use. Also try printing on a PC, and see if it works then, as you may have to live with this as the solution.

Feb 22, 2008 | HP Photosmart 3210 All-In-One InkJet...

3 Answers

HP Photosmart D7360-Won't print from photo tray


You have to push in the photo tray~. Push until you hear it click...then it will print from the print tray and in turn, you will be able to print photos unto your glossy photo paper instead of the letter size paper.

Oct 29, 2007 | HP Photosmart D7360 All-In-One InkJet...

Not finding what you are looking for?
Kodak EASYSHARE 5500 All-In-One InkJet Printer Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

Ekse

Level 3 Expert

13434 Answers

Cindy Wells

Level 3 Expert

6048 Answers

Are you a Kodak Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...