Question about Andis SuperLiner Trimmer 04810

2 Answers

I wanna know how to fix Andis superliner clippers.mine just simply dont cut anymore??someone please help

Help me please i really need these clippers!! for school please get back to me a.s.a.p.

Posted by on

  • Renee
    Renee Jul 29, 2014

    Hi Ruben Sifuentes, I want to help you with your question, but I need more information from you. Can you please add details in the comment box?

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

A. If blade teeth are broken or damaged you might find teeth plate repacement. B. If teeth are not damaged, check adjustment screws.C. If you have used it for a long time,it is not sharp anymore and there is not a reliable way to sharpen the teeth realy and you need to replace the teeth plate. But keep in might parts are not cheap and you might be better off buying a new one.

Posted on Jul 23, 2014

Ad

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 26 Answers

If the clippers stopped cutting, they are probably clogged with hair on the inside of the clippers. I had two pairs of clippers where this happened. I took them to be serviced at a beauty supply store and they cleaned the hair from the inside of both pairs of clippers for me and they now work just fine.

Posted on Jul 23, 2014

  • Karam Jul 23, 2014

    If your blades are not broken and the motor runs when you, also try putting some oil on the blades

  • Karam Jul 23, 2014

    Add a CommentIf your blades are not broken and the motor runs when you turn the clippers on, just try putting a few drops of oil on the blades. If the motor runs, the oil will cause the blades to move normally.

×

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wahl clippers


Teresa you lost the guide?! You cannot afford to buy a new one at $22-29 dollars! They are OLD?! Guess what? You just answered your own question. Go to WalMart, Break down and buy new ones. Don't take them apart unless your seated and have a magnet near you! By the way a New Guide will cost you $12 dollars with a blade. They come in sets only. So $12 old one $22 new one? Duh I wonder what I will do?

If you need further help, reach me via phone at https://www.6ya.com/expert/steven_b77d19396bfe2249

Jan 19, 2014 | Wahl Clipper Corp. Adjustable 10-15-30...

1 Answer

Stopped heating


I work for Black & Decker. Any part that someone is telling you to purchase for that iron isn't from Black & Decker. Their irons are no designed to be repaired. If the iron is no longer heating, it needs to be replaced. Please call our customer service department at 800-231-9786 so that we may determine your warranty status.

I hope I've provided you useful assistance and that this information allows you to make an informed decision as to how to proceed from here. Please be sure to vote on my response. I hope I've earned a good rating from you today.

Please post a comment if you need additional assistance so that I can help you further.

Jul 20, 2009 | Black & Decker D2030 Iron

2 Answers

My conair straightener won't heat up


that same thing is happening to me! but iv had mine for almost 2 years...exact same hair straightener, its happening to many people! i dont know if this is the problem but alot of people wrap their cords around their straighteners (i did too) and it twists the cord that conects to the hair straightener and makes it loose. i still have not found a way to solve this problem.

i would just go out and buy a new one, and if your looking for good but inexpensive i suggest vidal sassoon. they get really hot and have many settings and many different types. mine has worked greats

just remember not to wrap the cord

May 31, 2009 | Conair Professional Ceramic Hair...

1 Answer

Straightener not working!!!!


It sounds to me like the thermal cutoff switch has blown. Straighteners have these as a safety device similar to a fuse to protect against fire in the event it gets too hot. These are not very costly to replace. Here is a link to where you can buy them and what they look like:

http://www.welco.com.cn/?gclid=CJiWv7TN2ZQCFQpzHgodl1LXQQ

Make sure you get one of the exact same cutoff point as the one designed for yours. If you put in a higher temp device it will be harder to blow but will make it dangerous as it may cause a fire if it over heats. Some shady repair men will just bypass this and it will work again fine but this is a dangerous practice as it directly puts you of danger. If you do have it repaired at a shop demand for the old thermal cutoff from your unit when you drop it off so the tech will know you know what is wrong with it and that you will check to make sure that it has really been changed. This will also not give him the chance to over charge you when he knows you know it is only a 1 dollar part and easy to change.
This device is very easy to change, If you can open your unit you could easily do this yourself. The part, as you will see on the site where you buy them, only has 2 wires one coming out of each end. You simply cut out the old 1 and replace it with the new one. You do not even have to worry which end goes where. It is like a fuse, it works the same either direction. You have to buy some wire crimp connector to connect it, you can not just solder it in due to the heat in the iron. In a pinch you could just securely twist the ends of the leads with the leads from the old cutoff if you clip the leads from the old cutoff real close to the device. This will leave you with plenty of wire to get a good twist. I always use the crimp connectors so it looks more professional.
Anyway, I hope you found this to be helpful and if you need more help feel free to ask me. I will stay with you on this until we have it fixed.
George

Jul 23, 2008 | Conair Professional Ceramic Hair...

Not finding what you are looking for?
Andis SuperLiner Trimmer 04810 Logo

245 people viewed this question

Ask a Question

Usually answered in minutes!

Top Andis Irons Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Brad Brown

Level 3 Expert

18110 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Are you an Andis Iron Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...