Question about Realspace Mezza L-Shaped Glass Computer Desk, 30in.H x 61 1/2in.W x 61 1/2in.D, Black/Chrome

Open Question

Where can I get replacement parts for the pull out drawer

I need replacement parts for the pull out drawer

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove fabric softener dispenser?


Good Morning Friend,

I understand you want to know how to remove the fabric softener dispenser from your Frigidaire washer, model# ATF6000ES. To remove the drawer, please do the following:

• Remove the drawer by pulling it out until it stops.
• Reach back into the left rear corner of the drawer cavity and press down firmly on the lock tab (left rear portion of the drawer). Pull out the drawer.
• Remove the insert from the bleach and fabric softener compartments.
• Rinse the drawer and inserts with hot tap water to remove traces of accumulated powders and liquids. Large amounts of fabric softener residue may indicate improper dilution or more frequent cleaning is required.
• To clean the drawer opening, use a small brush to clean the recess. Remove all residues from the upper and lower parts of the recess.
• Replace the insert pressing the "X" to lock it in place. Return the dispenser drawer.

I ask that you please follow up with a comment on the post, at your convenience, to advise if further troubleshooting is needed or if your appliances status has changed successfully. Hope this is helpful.

-Best Regards-
WP

Jun 28, 2014 | Frigidaire ATF6000ES Front Load Washer

1 Answer

Fabric softener dispenser/how to clean


Good Morning Friend,

I understand you want to know how to clean the fabric softener dispenser from your Frigidaire washer, model# ATF7000ES. To remove the drawer and clean the dispenser, please do the following:

• Remove the drawer by pulling it out until it stops.
• Reach back into the left rear corner of the drawer cavity and press down firmly on the lock tab (left rear portion of the drawer). Pull out the drawer.
• Remove the insert from the bleach and fabric softener compartments.
• Rinse the drawer and inserts with hot tap water to remove traces of accumulated powders and liquids. Large amounts of fabric softener residue may indicate improper dilution or more frequent cleaning is required.
• To clean the drawer opening, use a small brush to clean the recess. Remove all residues from the upper and lower parts of the recess.
• Replace the insert pressing the "X" to lock it in place. Return the dispenser drawer.

I ask that you please follow up with a comment on the post, at your convenience, to advise if further troubleshooting is needed or if your appliances status has changed successfully. Hope this is helpful.

-Best Regards-
WP

Jun 28, 2014 | Frigidaire Affinity ATF7000E Front Load...

2 Answers

Kenmore Refrigerator 596.73503200 deli drawer cover hinge pin on right side broke off. Part #?


I would direct you to this link to find the part number you're looking for. I do not have one of these units to look at so am unsure which specific piece you'll need to replace.
Model 59673503200 KENMORE ELITE KENMORE REFRIGERATOR Parts

Nov 03, 2017 | Refrigerators

1 Answer

I have the dish drawers which are leaking from a hose behind the system. I need to replace the hose but I dont know how to take the entire unit out and /or take a drawer out to get back there. Thanks, Brad


Are you sure it is a hose?
Remove the bottom drawer and you can see every thing .Here's the procedure. Very simple and clever design.

Pull bottom drawer out part way.
Look for a large slotted plastic "scew"on each side top corner.
Remove both with 1/4 turn.
You can now pull drawer all the way out ,lifting slightly as you go. It will disengage from rails.
Don't go too far as you'll see the "umbillical".
You can now actually see alot inside.
You can actually run the top drawer with bottom drawer out to watch for leaks,check hoses etc

There's a good chance your lids are leaking ,not hoses .To fix, replace lid actuaters while your in there.


Hope this helps

Aug 15, 2011 | Fisher and Paykel 23 in. DD-603SS Built-in...

1 Answer

I have the Xerox XD120f. Cannot pull paper from either drawer.


The rollers are either dirty , or most likely worn out and need to be replaced. They are not hard to replace, but humidity is not the problem, the condtion of the rollers is the problem. Try cleaning them with something like fantastic or formula 109, then clean again with alcohol.
They become slick and will not feed paper. You can google a business called The Parts Drop, they carry about everything for Xerox copiers.

Feb 15, 2010 | Xerox WorkCentre XD120F Laser Printer

1 Answer

Dispenser drawer


You could have a clog in the housing underneath the dispenser where the water flows through a hose into the tub.
Pull the dispenser drawer completely out.
There is a tab that needs to be depressed to release the drawer and remove it.
Check the opening at the bottom of the housing just inside the dispenser housing opening to see if a small sock or garment is clogging this opening.
Reach down into this opening to see if an item is inside the hose.
This is the normal issue that will cause water to leak out of the dispenser housing.

Wash the dispenser drawer thoroughly with warm water. Make sure that you pull off the siphon covers and wash all siphon holes. This process is described in your owner's manual. Replace the dispenser drawer and try the washer again.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Mar 03, 2009 | Kenmore 44102 Front Load Washer

3 Answers

Crisper Door broken


Repairclinic.com had the parts I needed (crisper drawer lid and the longer drawer lid.

Nov 17, 2008 | LG LRFD25850 French Door Refrigerator

1 Answer

Frigidaire gltf2940e front loading washer - dispenser drawer magnet replacement


When you are looking at the drawer, the magnet stands upright on the far right side just inside the outer front casing about halfway down. There is a small plastic clip that holds it in place. You don't need to take anything apart to reinsert the magnet, just open the drawer, but it may be easier to see the location if you pull the drawer all the way out of the hole.

Nov 02, 2008 | Frigidaire GLTF2940E Front Load Washer

2 Answers

My detergent/softener pull out drawer is stuck!!! need help please!


This problem has just started popping up for me as well.  I believe that the problem is in the dispenser assembly where the drawer slides into.  You will have to pull hard and possibly may break a part of the plastic drawer to open it.  The dispenser assembly looks like it is bowing in the middle and jamming up against the dispenser drawer.  If it jams up like that, you may need to replace both the drawer and dispenser assembly togther.

Jan 06, 2008 | LG WM-3677HW Front Load Washer / Dryer

1 Answer

Fisher Paykel Dishwasher Door Open error code


If it is a dish drawer type there is a clip at the rear of the drawer that holds the drawer closed. you will need to withdraw the drawer partially to look in. with the drawer open the fingers should be facing towards you. If not you will need to reach in and pull the top of the fingers towards the front. there is a replacement arm that holds the pipes and cables away from this part.

Nov 18, 2007 | Fisher and Paykel 24 in. DD603H W Built-in...

Not finding what you are looking for?
Realspace Mezza L-Shaped Glass Computer Desk, 30in.H x 61 1/2in.W x 61 1/2in.D, Black/Chrome Logo

Related Topics:

267 people viewed this question

Ask a Question

Usually answered in minutes!

Top Realspace Computers & Internet Experts

Cindy Wells

Level 3 Expert

6046 Answers

Redhatchris

Level 1 Expert

18 Answers

Tom Chichester

Level 3 Expert

54386 Answers

Are you a Realspace Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...