Question about GE GSS25LGM Side by Side Refrigerator

Open Question

Why Water dispencer is not working, temperature control not working,turbo cool and express chile are not working.

Why temp control on front door is not working? Why dispenser water is not working? Light blink on front panel without any function? Light blocked on front panel freezer door?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

SOURCE: Ice and Water not dispensing. Light button not working

I had GE come out and look at it. I wasn't home to ask questions. The repair man basically said it was a 'loose connection' in the back which is where the motherboard is for all the electronics. It took him less than 5 minutes to fix and he was gone.

Thankfully - it cost me zilch. I told a small white lie and said we were still under warranty and they didn't ask to verify. Can I get an Amen!

Posted on Oct 24, 2007

Ad

Anonymous

  • 184 Answers

SOURCE: Ice and Water not dispensing. Light button not working

INSIDE THE DISPENSER ASSEMBLY IS A SEPARATE ELECTRONIC BOARD THAT CONTROLS THE DISPENSER.
OCCASIONALLY, THE DOOR SOLENOID OR THE CUBE ICE SOLENOID WILL SHORT OUT CAUSING A BURNOUT OF THE DISPENSER CONTROL BOARD. CHECK FOR A BURNT SMELL COMING FROM THE DISPENSER HOUSING. IF YOU SMELL IT, THE BOARD AND/OR SOLENOID NEED TO BE REPLACED.

Posted on Apr 10, 2008

Anonymous

  • 1665 Answers

SOURCE: Ice and Water not dispensing. Light button not working

http://www.repairclinic.com/0100_1.asp
There's an ice- or water-dispensing problem The ice and water-dispensing system of your refrigerator is quite complex. Many components work together to provide the ice and water. Aside from a simple problem of a leaky water tube or a jammed ice chute, most other components are not user serviceable. We suggest that you contact a qualified appliance repair technician for such repairs.

Posted on Jul 04, 2008

Anonymous

  • 1 Answer

SOURCE: Inside Dsiplay Not Always on

Hi -
I haven't solved my problem, yet, but i have determined that it's beyond my scope and will require a pro's visit to my house.

thanks for the line.
b

Posted on Aug 18, 2008

Anonymous

  • 1 Answer

SOURCE: ice/water dispenser control panel

@ Scootertramp

You tell us about this board or that board but never tell us where to located or get at these boards. Would you please clarify that?

My ice and water started dispensing sporadically, though the lights were working fine. After I removed the kick board at the bottom, cleaned out the little connector and put it back together, nothing on the door works. All else works fine.

Posted on Sep 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

LG Express Cool Turbo GR T542G Stopped cooling


it should run when the comp is on and the unit is calling for cooling, you most likely need a new fan for your unit.

Aug 10, 2013 | Refrigerators

3 Answers

Can not find heater control valve 2000 expedition


what year? for 2000, there are no control valves. It mixes a/c air with heater core air to blend the right temp.

SECTION 412-02: Heating and Ventilation 2000 Expedition/Navigator Workshop Manual
DESCRIPTION AND OPERATION Heating/Defrosting The heating and defrosting system has the following features:
  • Controls the temperature and, during A/C operation, reduces the relative humidity of the air inside the vehicle.
  • Delivers heated or cooled air to maintain the vehicle interior temperature and comfort level.
  • Controls the A/C blower motor speed.
  • Cooling or heating can be adjusted to maintain the desired temperature.
  • Uses a reheat method to provide conditioned air to the passenger compartment.
  • The blower motor draws outside air through the A/C recirculating air duct, except for MAX A/C cooling, when recirculated air is used.
  • All airflow from the blower motor passes through the A/C evaporator core.
  • The temperature is then regulated by reheating a portion of the air and blending it with the remaining cool air to the desired temperature.
  • The temperature blending is controlled by the temperature blend door, which regulates the amount of air that flows through and around the heater core, where it is then mixed and distributed.
------------------------------------------------------------------------------------------------

Dec 01, 2009 | Ford Expedition Cars & Trucks

1 Answer

My frigidaire is not cooling


if able unplug for aout 3 minutes then plug back in (it should reset control unit) this should help

Jun 01, 2009 | Frigidaire FRS26R4A Side by Side...

2 Answers

Flashing temp on freezer door


take and press the two top buttons on the control panel and reset the unit. it appears the the freezer is not operating properly and may by frozen up

Mar 21, 2009 | Samsung RS2534 Side by Side Refrigerator

2 Answers

1989 mazda rx7 turbo over heating


Hi and welcome to FixYa,

A couple of ideas you may want to explore:
  • the engine overheating after a shutdown could perhaps be addressed by installing a time delay off on the relay of the radiator fan. The idea is after absence of Ignition B+12 (engine off), the fan/relay should still be energized for a number of minutes so as to cool the radiator;
  • idling the engine for about 5 minutes before shutdown is a good practice. this enable the engine to cool slowly rather than an abrupt change in temperature of the external but the inside is still rather hot;
  • the opening of the thermostat is triggered by the temperature of the water above it not below (where the spring is);
  • in my country, where it is relatively always hot, some mechs remove the thermostat (of course not applicable in cold climates);
  • a more helpful idea would be the installation of an electric water pump in lieu of the mechanical one. There are several after market models. Pls try here, here or here for a start;
  • it is also possible to wire the electric water pump to still run for a minute or more similar to the proposed time delay for the radiator fan above.

Good luck and Thank you for using FixYa. Happy Holidays.

Dec 07, 2008 | 1989 Mazda RX-7

2 Answers

New GE profile refrigerator bottom freezer model pfss6pkwass. Will not run, stuck in display mode. Lights are on but when setting temp on panel it goes back to off after a few seconds. After spending...


Ok, I had the same problem with this fridge. It is in "demo" mode. You have to push in and hold the Energy Save and Adjust Freezer buttons at the same time. Hold these in until the display starts flashing. You should hear the compressor kick on. I did this, and it was fixed and started cooling in a matter of seconds.

Aug 13, 2008 | Refrigerators

1 Answer

Maytag mfd2561 water dispencer and ice maker issues


ther first refrig id have to see for better idea of problem but hte second with the flaps open and closing is going to need a high voltage board part num(12920710)---thats the part number i get wehn i look it up with the model MFI2568AEW. dont know where you got 12002608(that to is a h.v. board. which ever itssan easy enough repair to do yourself, its mounted on the rear of refrig and comes with programming instructions in the box

Mar 12, 2008 | Maytag (MFI2568AEW) Bottom Freezer French...

1 Answer

Maytag MFD2561HES


Texas, sounds like your water reservoir is frozen up. Remove your 2 cripser drawers, you will see the reservoir behind them. Take a hair dryer and go over the tank and tubing ends. See if the water starts flowing. I find a lot of frozen water reservoirs on these french door models. They have a insulation kit for them. Catriver.

Sep 29, 2007 | Maytag MFD2561HE Stainless Steel Bottom...

1 Answer

Maytag mfd2561 water dispencer and ice maker issues


Most likely it is the High Voltage Control board located in the unit compartment (take off the back cover where the water lines are) i have had lots of them failing and doing all kinds of odd things, so far it has been that computer. Part number 12002608

Sep 29, 2007 | Maytag MFD2561HE Stainless Steel Bottom...

Not finding what you are looking for?
GE GSS25LGM Side by Side Refrigerator Logo

Related Topics:

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Refrigerators Experts

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Ron Beer
Ron Beer

Level 1 Expert

11 Answers

vince

Level 3 Expert

1234 Answers

Are you a Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...