Question about Acer Aspire 5600U all-in-one desktop

2 Answers

Computer beep codes

Locked in an automatic repair mode. Cannot get out of it.

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Acer Master
  • 2,119 Answers
Ad

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Acer Master
  • 76,204 Answers

If you wish to get some details; check the site linked here. Pull up older posts.Surf the site with patience.http://electronicshelponline.blogspot.com/
Bios beep codes to many popular brand systems are given.

Posted on Aug 05, 2014

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the solution if my oven beeps?


Hello friend, thank you for your inquiry!

I understand that your door is locked and you have error "F5E1" showing on your range. I would perform a reset on your appliance which can be done by flipping the household circuit breaker off for roughly ten minutes. If that does not correct the issue and you continue to receive the error "F5E1" I would contact a professional to come out and repair your appliance because it could be an issue within your UIB (user interface board) or main control panel. Hopefully this helps. -Matt

Sep 15, 2014 | Frigidaire Stove/Oven/Range Glass Main Top...

1 Answer

Onida ac


PCB malfunctioning Repair it.

Apr 30, 2014 | Heating & Cooling

2 Answers

Gateway all in one computer turns on no video


Just because the computer turns on, doesn't mean it's working. In fact, power may be running through your motherboard but data won't be.

In these cases, the motherboard is usually damaged and will need to be replaced.

If you have a series of beep codes, then it's either your processor, RAM, GPU, or something else. If there is no beep code, it's a damaged motherboard that needs replaced.

Feb 21, 2013 | Gateway One ZX4300-41 (PWGAW02017) 20 in....

1 Answer

My oven is flashing a F10 code and the door is locked. This happened while the oven was in self cleaning mode


more than likely the tco thermal cutout fuse has opened during cleaning and now the ovens latch motor cant get power to open,its under the top cover where the surface elements are located its a frequent thing with all ovens/stoves

Jan 12, 2013 | Kenmore 40494 / 40495 / 40499 Electric...

1 Answer

I get a E4 code whan I turn on machine and I can't figure out what is wrong.


Brother Computer Codes E1: Make sure the presser foot is lowered before sewing.

E2: You chose a stitch other than a buttonhole stitch or a bar tack stitch and you tried to sew with the buttonhole lever in the lowered position. Raise the buttonhole lever.

E3: If you selected the buttonhole or tack bar stitch and start to sew with the buttonhole lever raised, you will get the E3 code. Lower the buttonhole lever.

E4: You hit the reverse button while the bobbin winder shaft was moved over to the right. Move the bobbin winder shaft to the left.


E5: On automatic sewing machines, the start/stop button was pressed while the foot controller was plugged in. Unplug the foot controller if you are using the automatic function.


E6: This code tells you that the motor locked up because the thread is tangled. Untangle the thread, make sure the machine is threaded properly and that the proper tension is set before continuing.

Sep 21, 2012 | Sewing Machines

1 Answer

My maytag gemini oven has been stuck in sabbath mode for months and holding the clock button does not help. It does this everytime we lose power and it stays off for months and will turn on when ever it...


Hello,

This is from the Maytag website it explains how to cancel the sabbath mode;

To cancel the Sabbath Mode:
Press the Clock pad for three seconds.
Or
After 72 hours, the Sabbath Mode will end.
  • "SAb" will flash for five seconds.
  • The time of day will return to the display.
NOTES:
  • Sabbath Mode can be turned on at any time with or without the oven on.
  • Sabbath Mode cannot be turned on if the keypads are locked out or when the door is locked.
  • Most prompts and messages and all beeps are deactivated when Sabbath Mode is active.
  • If the oven is baking when Sabbath Mode is set, the Bake icon will go out at the end of the baking cycle. There will be no audible beeps.
  • If the oven light is desired while in Sabbath Mode, it must be turned on before the Sabbath Mode is started.
  • When the Sabbath Mode is started, the temperature display will immediately show the set temperature, rather than the actual oven cavity temperature. No preheat beep will sound.
  • The self-clean cycle and automatic door lock do not operate during the Sabbath Mode.
  • Pressing the Cancel pad will cancel a Bake cycle, however the control will stay in the Sabbath Mode.
  • If power fails, the oven will power up in Sabbath Mode with 72 hours remaining and no cycle active.


I hope this helps to return it to normal mode,
GENE

Oct 13, 2011 | Maytag MER6772 Gemini Electric Kitchen...

1 Answer

Safe 7 (philips car 400)


Your radio is semi-locked due to wrong codes being entered previously.

Leave it SWITCHED ON...UNDISTURBED and it will reset itself automatically after several hours
Then you can switch ON plus the AS Button and you should get the Beep.

Aug 20, 2009 | Chrysler Scosche Factory Radio Interface...

1 Answer

F1 error code, continual beeping all other oven functions work properly


Here are the error codes for Dacor:

DACOR
Range/Stove/Oven Fault Codes Failure
Code
Condition Check/Repair F0 Clock pushbutton is stuck in a depressed position Check clock buttons F1 Element relay circuit failure Control board may be bad F2 Oven temperature exceeded the clean runaway temperature (self clean only) or the cooking runaway temperature (cooking modes only) Call for service F3 Short Circuit in the oven temperature sensor Check oven temperature sensor for continuity, if no resistance (zero ohms), replace F4 Short Circuit in the oven temperature sensor Check oven temperature sensor for continuity, if no resistance (zero ohms), replace F6 Failure in the EEPROM check comparison (only time of day and timer will operate) Call for service, electronic clock control is usually the cause of the problem F7 Failure of the self- clean automatic door latch system Check door latch and switch(es) F8 Failure of the door latch motor. Occurs when the motor runs for two minutes without the door locking in self-clean mode Check door lock motor and door latch

Nov 08, 2007 | Dacor Epicure ERD30 Dual Fuel (Electric...

Not finding what you are looking for?
Acer Aspire 5600U all-in-one desktop Logo

377 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acer Computers & Internet Experts

Ekse

Level 3 Expert

13434 Answers

Alun Cox

Level 3 Expert

2679 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1176 Answers

Are you an Acer Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...