Question about Canon PIXMA MP810 All-In-One InkJet Printer

Open Question

Where is lock switch on canon mp810

It shows error 5020

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 2 Answers

SOURCE: How do I resolve Error U150 on Canon MP810?

have had a MP810 about 3 months. Recently I've been getting a U150 error message. My C tank is not lighting up and being recognised. When I open up and replace the tank the light comes on. Initially this allowed me to carry on printing but now I have a constant error message even after replacing the tank.
Is there a permanent solution to this annoying problem?
I would be grateful for any assistance.

Posted on Jul 23, 2008

Ad
pineworks

Clive

  • 4345 Answers

SOURCE: printer canon mp810 displaying 5020 error

Hi
This maybe a small bit of paper in the rollers somewhere you need to find it or it is need of a good clean.

You can also try this.

Solution 1:
Clean the timing strip.

Solution 2:
The purge cap (the white sliding mechanism that the print head parks to when it's not in use) may be not lubricated well enough .

Lubricate the sliders with some white grease (don't get it on the small wipers or the black caps); this repair probably require to remove the right panel off of the printer to gain access to the purge mechanism.

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Posted on Feb 01, 2010

Ishola Olayemi

  • 1196 Answers

SOURCE: my canon mp810 is giving

Hi,

I will suggest you reset your canon printer, Follow this steps to reset your canon printer.

1. Turn off printer.
2. retaining button Resume/Cancel press button POWER - indicator it will catch fire by green color.
3. let go button Resume/Cancel, continuing to retain POWER.
4. press button Resume/Cancel of 2 times, retaining POWER, after which let go all buttons.
5. when indicator will be lit BY GREEN - press button Resume/Cancel of 4 times.
6. turn off printer by button POWER. Power on later to see what happens. let me know if additional information is required.

Posted on Dec 07, 2010

Jim Thurston

  • 672 Answers

SOURCE: mon imprimente pixma mp810 donne

This correction is listed on the Canon website. Lock Switch Make sure to unlock the scanning unit before turning the machine on.

  1. Lift the document cover open.

  2. Slide the scanner lock switch to the release mark.


    Caution : Make sure to unlock the Scanning Unit (Printer Cover) before turning the machine on.Before transporting the machine, always lock the Scanning Unit (Printer Cover) by moving the Scanner Lock Switch towards the lock mark.


    scanlockswitch.gif

  3. Close the document cover.

  4. Press to turn off the machine.

  5. Wait approximately 5 seconds then press to power back on the printer.

Posted on Mar 27, 2011

Magoroku Kai

  • 24 Answers

SOURCE: Whilst printing on my Canon

It means scanner locked

action:

Slide the lever to lock the scanner in the open position, turn off and turn MFP

Posted on May 24, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove cartridges when no power


The printer needs power to remove the cartridges. There is an assembly that moves and locks the cartridges and covers the ink nozzles to prevent the ink from drying out. Without power this assembly is locked in place and will not release.

Aug 21, 2012 | Canon PIXMA MP810 All-In-One InkJet...

1 Answer

Hello, I have a Canon MP810 printer and the screen shows there is an error with that number: 5020. It says that I have to unlock the locker of the scanner and then restart. I have done it many times...


I have just read it on the other forum..try this one
Error Code 5020:
Scanner lock switch locked. [5020] Release the scanner lock switch and turn the power
off and back on.
Turn the machine off, unlock the scanner lock
switch, then turn the machine on again.

Hope it helps.

Sep 09, 2011 | Canon PIXMA MP810 All-In-One InkJet...

1 Answer

Mon imprimente pixma mp810 donne un code erreur 5020 et demande de deverouiller le scaner


This correction is listed on the Canon website. Lock Switch Make sure to unlock the scanning unit before turning the machine on.
  1. Lift the document cover open.

  2. Slide the scanner lock switch to the release mark.


    Caution : Make sure to unlock the Scanning Unit (Printer Cover) before turning the machine on.Before transporting the machine, always lock the Scanning Unit (Printer Cover) by moving the Scanner Lock Switch towards the lock mark.


    scanlockswitch.gif

  3. Close the document cover.

  4. Press to turn off the machine.

  5. Wait approximately 5 seconds then press to power back on the printer.

Mar 27, 2011 | Canon PIXMA MP810 All-In-One InkJet...

1 Answer

How to trace and release scanner lock on Canon MP810 printer


Hello,

There's a lock switch, left side near the scanning glass.
Lift the cover ( 1 ) and
switch the lock switch to the open padlock indicator ( 2 )


36edb34.jpg
For online support on the MP810, look here:
http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_series/pixma_mp810

Jul 22, 2010 | Canon PIXMA MP810 All-In-One InkJet...

1 Answer

An error message 5020 appeared and the machine is not working, how to solve (to reset)?


error [5020] is not big problem. You just need to release the scaner lock switch and turn the power off and on back. Then you may enjoy to use your PIXMA MP810

May 29, 2010 | Canon PIXMA MP810 All-In-One InkJet...

2 Answers

Printer canon mp810 displaying 5020 error How do I fix it?


Hi
This maybe a small bit of paper in the rollers somewhere you need to find it or it is need of a good clean.

You can also try this.

Solution 1:
Clean the timing strip.

Solution 2:
The purge cap (the white sliding mechanism that the print head parks to when it's not in use) may be not lubricated well enough .

Lubricate the sliders with some white grease (don't get it on the small wipers or the black caps); this repair probably require to remove the right panel off of the printer to gain access to the purge mechanism.

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Feb 01, 2010 | Canon PIXMA MP810 All-In-One InkJet...

1 Answer

Error 5020 scanner lock switch will not turn off.I am using printer pixma mp810


Does anyone know how to fix error 5020 release the scanner lock switch and turn the power off & on.The Cannon MP810 Printer. Please Help!Thanks

Dec 07, 2008 | Office Equipment & Supplies

1 Answer

How do I resolve Error U150 on Canon MP810?


have had a MP810 about 3 months. Recently I've been getting a U150 error message. My C tank is not lighting up and being recognised. When I open up and replace the tank the light comes on. Initially this allowed me to carry on printing but now I have a constant error message even after replacing the tank.
Is there a permanent solution to this annoying problem?
I would be grateful for any assistance.

May 29, 2008 | Canon PIXMA MP810 All-In-One InkJet...

Not finding what you are looking for?
Canon PIXMA  MP810 All-In-One InkJet Printer Logo

Related Topics:

87 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

old marine
old marine

Level 3 Expert

2260 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...