Question about Whirlpool EL05CCX 4.3 Cu. Ft. Compact Refrigerator Including Full Size Storage Door and Freezer Comp...
Cubes were too small.
I adjusted fill timer to make larger.
now cubes too large.
harvest cycle ejects a stick of 8 conjoined half moon cubes in one lump! For the two days the harvest cycle is stalled- no cube ejection.
I'm old  with failing short term memory.
I forgot which way
to turn which screw
[beside the wheel-in corner of base-plate], and
how many degrees of rotation
[1-360] to make with the screwdriver
in order to reduce water fill time and
enjoy normal sized half moon cubes.
Counter clockwise should decrease it. Just turn it 1/4 turn each time and check it after it makes another batch of ice. Then reread this post and do it again till it's the way you want it.
Posted on Jun 30, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Jun 21, 2011 | Scotsman Ice Maker CM3 30inW Cubed Ice...
If your icemaker is producing small cubes, hollow cubes, huge cubes, or a solid slab of ice, one of the first things you want to check is the fill level. And it's not as difficult as you might think. (Hey, the hard part's wrenching that bottle out of Pookie's little fingers!) Unplug the refrig, pull the icemaker - usually one screw underneath, either 2 more or hooks above the cube mold - and unplug it. Take it to your sink and melt out any cubes with hot water. Then plug it and the refrig. back in, leaving it unattached from the freezer wall.
Manually start a 'harvest cycle' (see below) and hold Pookie's bottle under the fill tube. You'll have to wait a few minutes, because the water enters near the end of one complete rotation of the cube ejector, which constitutes a 'harvest cycle'. Regardless your type of icemaker, you're looking for 130-150 cc's, with most working best around 145cc's, but anywhere in this range should work OK.
(When replacing your icemaker with a new one, always check and adjust the water fill level this way too. You'll save yourself a lot of trouble.)
Jan 18, 2011 | GE Profile 25.6 Cu. Ft. Side-by-Side...
Aug 11, 2010 | Frigidaire Refrigerators
Jul 14, 2010 | Scotsman Ice Maker CM3 30inW Cubed Ice...
May 04, 2010 | Scotsman Ice Maker 600LB CM3 30inW...
Feb 04, 2010 | Scotsman Ice Maker CM3 30inW Cubed Ice...
Jul 04, 2009 | Freezers
Jun 25, 2009 | KitchenAid Superba Architect KSCS25INSS...
May 04, 2009 | U-Line Icemaker
Nov 06, 2007 | Scotsman CSW45 15" Ice Maker with 26 lb....
Jul 18, 2009 | Whirlpool EL05CCX 4.3 Cu. Ft. Compact...
101 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: