Question about Samsung SCX 4521F All-In-One Laser Printer
Posted by Anonymous on
Connect the telephone line to the LINE socket of the fax machine and a telephone receiver unit to the EXT socket of the fax machine.
To send a fax, put the document on the platen glass (face downward) or face upward in case of ADF.
press on hook dial, (here the dial tone on machines speaker)
dial the fax no. ( wait for call connection and here the fax Rx. tone)
To receive a fax two procedure can made, manual- lift a hand set of telephone receiver on incoming ring, here the TX tone(periodical beep tone) press * 9 * of the telephone receiver. In auto mode go to fax setup select ans. to ring or auto fax etc. to activate atuo reveive of fax.
Hope this may helpful.
Posted on Dec 31, 2014
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Small slit of glass "scanner glass" needs to be spotlessly cleaned, open lid to left 2cm wide runs width of lid.
G'day from Oz
Posted on Dec 03, 2007
SOURCE: communication error
I can give you a general answer. If the other fax machine is an older model, it probably has a slower baud rate. You probably have an option to slow your machine down. It goes thru a process to setup a tx speed, if it is not satisfied with the clarity of the line, it will timeout, hence your error. I would slow it down in increments until you get a reliable connection. If it only happens to one place, there is a possibility of a compatibility problem, which also can be solved, but would require service modes to do.
Posted on Mar 08, 2008
Try setting the receive mode to FAX/ANS. If you want the fax not to pickup before a phone call comes in, you should set the number of fax rings to a higher number, like "5" for instance. Set the answering machine rings less and the fax higher. The machine will usually record a message first and then detect a fax tone.
Posted on Mar 27, 2008
SOURCE: not recieving only in memory
My good friend:
The only reason why your unit stops printin faxes is because the toner cartridge is nearly empty. Th e unit will then try to conserve the remaining toner for printing and copying. Follow this steps to program the unit to print all faxes, even with toner low:
When the toner cartridge is nearly empty, the machine shows
the “[Toner Empty]” message and continues printing except
incoming faxes. In this case, incoming faxes are saved in
However, you can set the machine to print incoming faxes, even
though print quality is not optimal.
1 Press Menu until “Machine Setup” appears on the display.
2 Press the scroll button ( or ) until “Ignore Toner”
appears on the bottom line and press Enter.
3 Press the Scroll button ( or ) to select “On” or “Off”.
Select “On” to ignore the [Toner Empty] message.
Select “Off” to stop printing incoming faxes when the
message appears. This is the default setting.
4 Press Enter to save the selection.
5 To return to Standby mode, press Stop/Clear.
Posted on Jun 17, 2008
Tips for a great answer:
Apr 05, 2013 | Canon PIXMA Office Equipment & Supplies
May 20, 2010 | Office Equipment & Supplies
May 26, 2009 | HP 1010 Plain Paper Inkjet Fax
Mar 16, 2009 | Canon PIXMA MP780 All-In-One InkJet...
Feb 11, 2009 | Brother IntelliFax-4100e Fax
Oct 29, 2008 | Brother IntelliFAX 4100 Laser Fax
173 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: