Question about Bose Companion 3 Series II Multimedia Speaker System (3-Piece) - Graphite/Silver
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Apple TV and Bose Home Theater
I had the same problem.
I could not get HDMI to HDMI to work.
i fixed it (work around), by connecting ATV HDMI to DVD HDMI port on V30, i then connect L&R to AUX. I set the Bose remote for controlling ATV to AUX.
so to use ATV with Bose remote i know press DVD, this gives me the correct display but not audio, i then press AUX and this gives me ATV control and audio.
interesting, when i first set this up (trial and error), it didn't work. I was doing some cable management clean up, when i got a fright and the thing started working...but i have a ghost in my house so that is probably a more plausible reason why its working now.
it feels like this product is only 90% finished
Posted on May 26, 2009
SOURCE: No sound Bose Lifestyle 38 III
I am quite sure that the indicator lights should be green. The blinking yellow likely indicates that there is no communication between the head and the audiomass. Verify that the connections are tight and then try powering off (unplugging) the system (both head and audiomass) for 30 seconds and then powering on again. That will often re-establish communications.
Posted on Aug 22, 2009
i did have encounter the same problem!!!! what i did was have the whole capacitor replace ! I didn't bother to have them check beside its will cost you less than $10 this is how a capacitor will look like http://www.allproducts.com/manufacture97/qiyu/product1.jpg . check the ( + )positive ( - )nagative by marking either one on the PCB board before you proceed! very important! good luck
Posted on Dec 06, 2009
panasonic home theatre-can't select tv/video area after hooking up to new Vizio TV. DVD lights keep flashing. Can only select am/fm.
Posted on Feb 28, 2010
SOURCE: Have a Bose 3-2-1 Series
Here are 3 things to try and an if all else fails at the end.
1) Make sure the TV is set to the correct Video Input to see the video from DVDs on the Bose system.
• Make sure a DVD is in the disc tray.
• If the TV is connected to the media center using the HDMI cable:
Switch from one Video Input to another and then back to the original input.
2) Turn everything off, then:
Turn on the TV and set the TV Video Input for the Bose system video.
Turn on the Bose system and press DVD.
3) Turn off both the TV and the Bose system and then:
Unplug the HDMI cable from both ends.
Disconnect the power cables from both your TV and the Bose 321 system.
Re-connect power to the TV and to the Bose 321 system.
When the Bose 321 system startup message disappears from the display,
re-connect the HDMI cable to the TV then Bose 321 system.
Turn on the TV first, then turn on the Bose 321 system.
If all the above fail then disconnect the HDMI cable that connects the TV to the Bose 321 system and reconnect the two using a Component cable, an S-Video cable, or the Composite cable provided with the system.
Please leave feedback
Posted on Apr 28, 2011
Tips for a great answer:
Jan 18, 2016 | Bose 321 Series Iii Dvd Home Entertainment...
Mar 02, 2015 | Bose Audio Players & Recorders
May 11, 2014 | Bose 321 GS Series III DVD Home...
Jan 18, 2011 | Bose Lifestyle 28 Series III DVD Home...
Dec 22, 2010 | Bose Lifestyle 28 Series III DVD Home...
Apr 04, 2010 | Bose 3 2 1 GSX System
Jan 19, 2009 | Bose 3 2 1 Series I DVD Home Entertainment...
Mar 25, 2017 | Bose Cinemate Digital Home Theater System...
Dec 24, 2013 | Bose Companion 3 Series II Multimedia...
41 people viewed this question
Usually answered in minutes!