Question about GE (PSS26MSRSS) Side by Side Refrigerator

Open Question

Ge profile pss265gpass

What is the interface assembly boarding doesnt set up the time for colder

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
Sea Breeze

John Tripp

  • 4656 Answers

SOURCE: Interface board does not work. We bought a new

We need to trace the wiring when ready, Sea Breeze

Posted on Mar 20, 2010

Ad

Anonymous

  • 79 Answers

SOURCE: just plugged in a brand new ge profile and its

ck comp motor could be bad make sure a fans are running.

Posted on Apr 11, 2010

einakin

  • 57 Answers

SOURCE: My GE Profile side by side fridge freeze the food

You probably have a sensor issues there are two one for the freezer one for the frig. Check your freezer temp it should be at 0 degress at manufactor setting. If the temp is below -10 you freezer sensor is bad. Otherwise your frig sensor is bad. CHECK FREEZER FIRST!!!

Posted on May 27, 2011

heatman101

D. Floyd Kolb

  • 43501 Answers

SOURCE: I have freezer top/ refgrigerator

Hi,

Higher is colder...

heatman101

Posted on Sep 04, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hello. The time keeps flashing on and off on my GE profile oven. No buttons work. I've tried unplugging it and resetting the breaker. Time still flashes on and off.


Depending on how handy you are, there is something you can try. Unplug the unit, remove user interface/control board and look for a ribbon connector. It will be on the side of the control board and loop around to the user interface. Disconnect the ribbon cable from the control board and use your fingers to tightly rub the ends of it to make sure there is no corrosion or anything on it. Put it all back together and see what happens. If that doesn't fix it, a new user interface is in your future.

Aug 16, 2016 | GE Ovens

1 Answer

Ge profile bottom freezer model # PGSS5NFXA SS. Got up this morning and freezer thawing both fridge and freezer same


Not sure if the compressor is running. If not, you'll need a repair man. Since fans are running, most likely the thermistor. Also, if you haven't unplug from the wall, wait 10 seconds then plug back in; this may reset the control board. The link below may help. GE Refrigerator Not Cold Enough

Feb 03, 2015 | GE Refrigerators

1 Answer

PSS23SGSSS Front Door Controls not working


if you have replaced the mainboard in the rear of the unit,and it still doesn't change temps then you need to replace the interface control that your using trying to reset the temps

May 02, 2012 | GE Profile¿ Energy Star® 22.6...

1 Answer

My GE Profile side by side fridge freeze the food in the bottom draw. I have set the temp to 43F but keep the fridge at 34 or colder. It frooze the water lines and tank in the fridge several times. What am...


You probably have a sensor issues there are two one for the freezer one for the frig. Check your freezer temp it should be at 0 degress at manufactor setting. If the temp is below -10 you freezer sensor is bad. Otherwise your frig sensor is bad. CHECK FREEZER FIRST!!!

May 27, 2011 | GE Profile 25.5 Cu. Ft. Side-by-Side...

1 Answer

My GE TFX30PP is constantly running and doesn't turn off. The freezer is very cold but the frig side isn't cold enough. A repair guy put in a new "cold contol" sensor but it didn't help.


This is a very common issue, If the freezer compartment is cold and making ice the
problem is simply airflow from the freezer into the refrigerated section.
Typically when one senses the refrigerator is warm they max out the settings
on both dials the thermostat with its 1-10 settings as well as off for the compressor.
This controls the compressor and temperature.
The additional setting or dial is for colder freezer or refrigerator as well , However
it simply opens or closes a flapper door between the freezer and refrigerator boxes.
When that dial or setting is maxed , it closes and makes the freezer colder, yet leaves the refrigerated section starved for sufficient airflow to maintain a cold box in the refrigerated section.
Just set the dial that does not turn the compressor off to the middle setting.
One can leave the thermostat that does control the compressor in the max setting , just not the colder freezer setting, If you notice colder isnt colder refrigerator, Its actually colder freezer, A common issue found on 25% of all refrigerator calls a simple setting adjustment.
Its easy to think that maxing out the settings makes for a colder refrigerator, it doesnt, it makes a colder freezer and warm rerigeration section.
If a freezer is making ice, theres nothing wrong with the unit other than airflow setting.
I would also clesan the condenser coils off.

Add a comment

Dec 24, 2010 | GE Profile Performance 29.8 cu. ft....

1 Answer

Interface board does not work. We bought a new


We need to trace the wiring when ready, Sea Breeze

Mar 20, 2010 | GE Refrigerators

1 Answer

GE PROFILE PCF25PGSABB- Ice maker only makes water since the day we brought it home- Frig will not get colder 41 degrees.I have followed all instructions. Is the mainboard kit d/evap the Motherboard and...


Motherboards usually react to an outside problem like a defective fan or compressor start components failure. To replace the board without checking for a cause would be a very expensive mistake. You mentioned that this has happened beginning the day you brought the refrigerator home. Is this a warranty issue? I can help you find the problem but until the problem is fixed never replace the motherboard. A defective fan motor or defective compressor start components will take out a new mother board before you blink. Even so called service technicians miss this! They come to your home switch the board, get paid and bad board again.Let me know if you need my help, Thanks, Sea Breeze

Feb 20, 2010 | GE Profile 26.6 cu. ft. Side-by-Side...

1 Answer

Where is the thermostat on a GE profile refrigerator Side-by-Side


There is no thermostat ( cold control ) on your model refrigerator . It works off thermistors ( 3 in the refrig section and 2 in the freezer section ) . These thermistors , operate by the coldness which in turn , less resistance to the main control board the colder or warmer it will provide .

Sep 12, 2009 | GE Refrigerators

2 Answers

Ge oven jpbp90


Ted, you probably have a bad ignitor. If you have a meter, you can do some checks to rule out the board. Take the back top panel off and on the board you will see four wires..from left to right they should read L1, neutral, broil and bake on the board. Broil and bake will be marked as BR and BA. Set the oven to 350 and press bake, you should have 120V from BA to Nuetral. If so your board is ok. You should also hear a click after pressing bake. 90% of the time it's the ignitor, part number WB13K0004. Be care when testing with live power. Catriver..post back.

Oct 15, 2006 | GE Profile Spectra JGBP90 Gas Kitchen...

Not finding what you are looking for?
GE (PSS26MSRSS) Side by Side Refrigerator Logo

Related Topics:

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top Refrigerators Experts

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Ron Beer
Ron Beer

Level 1 Expert

11 Answers

vince

Level 3 Expert

1234 Answers

Are you a Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...