Question about Magimix 5100 Cuisine Systeme Food Processor

1 Answer

Can I change the plastic motor spindle on a magimix 5100?

Can I change the plastic motor spindle

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Magimix Master
  • 1,361 Answers

Yes you can, you can "cut" it off with a soldering iron by melting a slot down one side. When banging a new one on you need to remove the base and suppert the bottom of the shaft with something solid underneath it. The whole motor assembly will be sitting on this as you bang the new sleeve on with a soft mallet. If you don't there is a danger you will wreck the motor and you cannot afford to replace that bit.

Posted on Sep 07, 2014

Ad

4 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 1 Answer

SOURCE: Opening the bace of magimix 5100

measured the width of the screw head and compared it to a comprehensive torx screw dimension chart
Thanks
Andy

Posted on Sep 19, 2009

co7196

Ned C Cook

  • 3433 Answers

SOURCE: need bowl and lid for 5100

Go to this site. or type magicmix in the search bar at the top of the screen, Good Luck


http://www.magimix-spares.co.uk/Parts-for-Magimix-5100-lid,-...

Posted on Oct 31, 2009

caroldon

Donald DCruz

  • 17130 Answers

SOURCE: dead motor in Magimix Cuisine 5100

Remove and check if there is any fault of a brush contact or switch contact or if the load trip switch had reset.
If the power is coming to the motor and is not running you need to confirm fully if the windings are open , if so replace motor.
if not remove and reset the setting of the brush/commutator.

Posted on Sep 24, 2010

Testimonial: "A good simple test to perform, and optimism about a solution either way - thanks very much!"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Magimix 5100


Yes you can, you can "cut" it off with a soldering iron by melting a slot down one side. When banging a new one on you need to remove the base and suppert the bottom of the shaft with something solid underneath it. The whole motor assembly will be sitting on this as you bang the new sleeve on with a soft mallet. If you don't there is a danger you will wreck the motor and you cannot afford to replace that bit.

Aug 29, 2014 | Magimix 5100 Cuisine Systeme Food...

1 Answer

The extension post in my magimix 4200 is stuck on the motor shaft seems like It's welded on can anyone help


How to Change a Magimix Food processor plastic spindle.
This is meant as a guide only BBS ltd takes no responsibility for any damage done. We always advise that this should be done by a Magimix approved service agent.

The spindle is the part that sticks out of the motor this drives the blades, knifes, discs and cones for the food processor, this part may become worn after time or use.
Cover the main body with a cloth so as not to damage the look of the food processing machine.
Place two blocks of wood about 10cms either side of spindle cover. Then place two flat screwdrivers Horizontal either side of Magimix food processor spindle
Push down on handle of screwdrivers apply even pressure (keeping eyes well away from the spindle cover, they can fly off fast sometimes.)
The spindle will rise.
This will leave the metal centre shaft, Replace with a spindle cover bought from
www.magimix-spares.co.uk. Make sure you choose correct model, usually named on front of machine, or phone 01252 727755 for help.
When replacing, make sure that the New Food processor spindle is lined up and slide the spindle onto the centre shaft. Make sure this goes all the way down by gently tapping with a hammer.
All blades and attachments should be checked before placing back onto spindle cover, if the inside is damaged, this could damage the spindle cover again, any blade, dough blade , disc support that is marked should be replaced.

BBS Limited is the approved and dedicated supplier of Magimix parts & accessories for all Magimix products.
Please telephone +44 (0) 1252 727755 or fax +44 (0) 1252 727766 for help or advice. All images and text are Copyright (c) 2008 BBS Limited.

Magimix Spares Parts from BBS Ltd

Apr 03, 2014 | Food Processors

1 Answer

Dead motor in Magimix Cuisine 5100


Remove and check if there is any fault of a brush contact or switch contact or if the load trip switch had reset.
If the power is coming to the motor and is not running you need to confirm fully if the windings are open , if so replace motor.
if not remove and reset the setting of the brush/commutator.

Sep 24, 2010 | Magimix 5100 Cuisine Systeme Food...

1 Answer

Need bowl and lid for 5100


Go to this site. or type magicmix in the search bar at the top of the screen, Good Luck


http://www.magimix-spares.co.uk/Parts-for-Magimix-5100-lid,-...

Oct 30, 2009 | Magimix 5100 Cuisine Systeme Food...

1 Answer

The center spindle on my Magimix 5150 is stripped and needs to be replaced. Any idea if this is a do-it-yourself project if I can buy the part or should I send it out to be repaired?


Just researching the same problem. Apparently your can find the spare parts here:
http://www.magimix-spares.co.uk/Magimix-5200,-5100-spindle-cover-white,-Nylon-driveshaft-/product/104991/104991/
The old one is has push fit on an inner spindle and apparently can be prized off from outside without dismantling the machine. See the link below for further details.:
http://www.howtomendit.com/answers.php?id=47005

Oct 08, 2009 | Magimix 5150 Food Processor

1 Answer

Magimix blade is stuck


You need to replace the spindle i'm afraid which gets worn after a time. There a UK company that sells replacements and tells you how to replace it. Not a big job though a bit tricky. magimixspares.com

Jun 28, 2009 | Magimix 5100 Cuisine Systeme Food...

2 Answers

Where can I buy a 4mm and 6mm grater for Magimix 5100


HI! magimix-spares.co.uk seems to do quite a lot of spare parts for a range of models. Here's the web address for the 5100 model: http://www.magimix-spares.co.uk/Magimix-5100-blades-and-all-discs-/products/1060/
Not sure if they'll have the blades in stock.... Hope this helps!

Jan 31, 2009 | Magimix 5100 Cuisine Systeme Food...

2 Answers

Magimix sytem cuisine


How to Change a Magimix Food processor plastic spindle.

This is meant as a guide only BBS ltd takes no responsibility for any damage done. We always advise that this should be done by a Magimix approved service agent.


The spindle is the part that sticks out of the motor this drives the blades, knifes, discs and cones for the food processor, this part may become worn after time or use.


Cover the main body with a cloth so as not to damage the look of the food processing machine.

Place two blocks of wood about 10cms either side of spindle cover. Then place two flat screwdrivers Horizontal either side of Magimix food processor spindle

Push down on handle of screwdrivers apply even pressure (keeping eyes well away from the spindle cover, they can fly off fast sometimes.)
The spindle will rise.


This will leave the metal centre shaft, Replace with a spindle cover bought from
www.magimix-spares.co.uk. Make sure you choose correct model, usually named on front of machine, or phone 01252 727755 for help.

When replacing, make sure that the New Food processor spindle is lined up and slide the spindle onto the centre shaft. Make sure this goes all the way down by gently tapping with a hammer.



All blades and attachments should be checked before placing back onto spindle cover, if the inside is damaged, this could damage the spindle cover again, any blade, dough blade , disc support that is marked should be replaced.

BBS Limited is the approved and dedicated supplier of Magimix parts & accessories for all Magimix products.
Please telephone +44 (0) 1252 727755 or fax +44 (0) 1252 727766 for help or advice. All images and text are Copyright (c) 2008 BBS Limited.

Jul 02, 2008 | Magimix 5100 Cuisine Systeme Food...

Not finding what you are looking for?
Magimix 5100 Cuisine Systeme Food Processor Logo

296 people viewed this question

Ask a Question

Usually answered in minutes!

Top Magimix Food Processors Experts

Ross Keen

Level 3 Expert

1361 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

29402 Answers

Ruth summersides

Level 3 Expert

1477 Answers

Are you a Magimix Food Processor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...