Question about Hunter Concert Breeze New Bronze 52-Inch Ceiling Fan with Light and Remote
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
common problem , i went to home depot and bought a new remote for my hunter fan , and it worked again , salesman was very knowledgeable and helpful . thanks. explain the problem to him , he can help .
Posted on Dec 30, 2008
If you are asking for instructions on checking and possibly adding oil to a Hunter Original fan. Here are instructions:
Check oil level immediately after filling the reservoir. To check oil, bend an ordinary pipe cleaner into a 1/2" long hook and dip it into the oil reservoir.
If oil touches the end of the pipe cleaner, the fan has ample oil. If it does not touch, add SAE 10 non-detergent oil slowly until it touches the pipe cleaner.
-Hunter Original fans rarely/ never need oil unless they were relocated or tipped. ...Or if the fan was improperly installed.
-Hunter sells an oil refill / oil level check kit with good instructions. They also sell a relocation kit that includes the same kit plus all mounting hardware needed.
Posted on May 05, 2009
If it has a chain, buy a light dimmer switch so it will not have 1 speed anymore. If it has a remote control, buy a new remote control like your old one. Try different numbers on remote control.
Posted on Jun 27, 2009
You will most likely need to replace the receiver with a new one from hunter. The receiver is actually a complete controller and contains the receiver, relays (which you hear clicking) and starting condensors(large capacitors which hold a charge that is "dumped" over the windings to get the motor to start from a dead stop). These appear to be pretty tightly assembled unless you have a desire to start replacing parts "off the board."
Posted on Sep 07, 2009
it also could be one of the the jumpers fell out of the remote
they are located just above the battery. you will need to match the placement of the jumpers with the receiver mounted in the fan.
Posted on Mar 09, 2010
Tips for a great answer:
Aug 29, 2014 | Hunter (25417) Ceiling Fan
Apr 17, 2013 | Hunter 23852 Classic Original Ceiling Fan
Mar 16, 2013 | Hunter 23852 Classic Original Ceiling Fan
Jul 22, 2011 | Hunter (25417) Ceiling Fan
Apr 22, 2011 | Hunter Dryers
Sep 18, 2010 | Hunter 23852 Classic Original Ceiling Fan
Jun 26, 2010 | Hunter 23852 Classic Original Ceiling Fan
Apr 26, 2009 | Hunter 23852 Classic Original Ceiling Fan
Dec 02, 2019 | Haier Televison & Video
38 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: