Question about Concord Fans Dryers
Need code for remote
Ceiling fans usually come with dedicated remotes. So not sure what purpose would be served by having the code. These are not TV remotes where you can program other audio visual devices like DVD player, amplifier etc.
For the concord ceiling fans you can purchase one of three remote controllers shown on this site. You also have to buy the corresponding receiver unit that sits on top of the fan rod near the ceiling.
Posted on Sep 02, 2014
You have this backwards. The code is stored in the remote. The receiver is located inside the fan housing. You can try removing batteries from the remote, pressing all buttons to eliminate the possibility of a stuck one, reinstalling batteries (or installing new ones) and testing operation. If no results, disconnect power at the ceiling fan source, not the fan itself. Pause briefly, reconnect power and test operation.
Posted on Sep 02, 2014
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
i have 2sets of wires coming down from my ceiling and the prints did not come in my box for wireing them what do i do
Posted on Jun 17, 2008
It is possible. Unless you know a bit of electronics, it would be difficult to do the conversion. You have to study the control circuitry of the old and new ceiling fan. You are lucky if it is a pin-to-pin direct conversion. An electronics techinician at your location can do it easily...I guess.
Posted on Jan 13, 2009
If you don't want the to use the remote you don't have to, but you don't have enough wires to switch the upper light, the lower light, and the fan. You can, however, switch the upper and lower lights together if that's okay. In order to do that you'd connect the white from the ceiling box to the white (neutral) on the fan, then the green from the ceiling box to any green(ground) wires on the fan, then the black from the ceiling box to the black(motor) from the fan, then the red from the ceiling box to the blue and orange (lights) from the fan. I'm assuming that the black and red in the ceiling box are also in the switch box where the fan/light control switch is going. Those are the ones you'll connect to the controller.
Posted on Jan 27, 2009
There is no set code from the factory; usually all the dip switches are in the same direction. In order to find the code, you will have to take the fan down, pull the remote out far enough to observe the dip switches, and then set them the same way on the remote.
Posted on May 26, 2009
Unfortunately, you either have a faulty reciever or remote. A replacement will cost $30-$40 at homedepot. And it doesn't matter which is faulty because you can't purchase them seperately anyhow.
I’m happy to assist further over the phone at https://www.6ya.com/expert/jerry_612d8419f8984578
Posted on Sep 09, 2009
Tips for a great answer:
Jul 06, 2017 | Concord Fans Roosevelt +70RS5ORB Ceiling...
Feb 03, 2015 | Dryers
Sep 06, 2014 | Dynasty Concord | 52DY5RI | 52" Ceiling...
Sep 02, 2014 | Dryers
Aug 10, 2014 | Dynasty Concord | 52DY5RI | 52" Ceiling...
May 18, 2014 | Concord Fans 52GI5OWL Grecian Isle Old...
Aug 02, 2013 | Concord Fans 52CP6ORB Capetown Oil Rubbed...
Jul 25, 2013 | Concord Fans Dryers
Jan 10, 2012 | Concord Fans PB-1256-EMN GRANDEVILLE...
219 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: