Question about Mintek DVD-1600 DVD Player

Open Question

<!-- from fixya rte -->Hooking up dvd 1600 to HDMI - Mintek DVD-1600 DVD Player

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to hook up the dvd player to tv


Depends on what type of hook up you have, is there an hdmi out on the dvd player, if so then hookup out on dvd to the hdmi on your tv, if you don't have hdmi then you might have rc jacks,if it's an old did player then it probably hooks up with coax

Feb 05, 2018 | Televison & Video

1 Answer

Mac serial numbers C07M3AV8DWYL


According to the serial number, the late 2012 Mac mini's maximum Resolution: Up to 2560 by 1600 (Thunderbolt) or 1920 by 1200 (HDMI). However, this mini does not have a slot loading DVD drive.

The last mini with a slot loading drive was made in 2010. That model's maximum resolution is Up to 2560 by 1600 (Mini DisplayPort) or 1920 by 1200 (HDMI)

Aug 20, 2014 | Apple MAC MINI 266GHz Intel Core 2 Duo 8...

1 Answer

Hdmi DVD player


normally all new tv as port HDMI, if you do not have you need a converter see the diagram attached.
God bless youb5291468-b0a6-4610-9384-fdd9fab4ff9b.jpg

Jul 11, 2013 | Nokia 1100 1101 1108 1110 1112 1200 1208...

1 Answer

I dont really have a problem. I just dont know which port to hook dvd player to. I need maybe the layout of the back panal, on what goes where.


U have a lated DVD player,like less than three years old?U can hook it up with one cable wire.It call a HDMI cable.Very easy to hook up,just one end of the HDMI cable to the tv HDMI tv port hub,the other side of HDMI cable to the HDMI DVD player port hub that it.Now u,must know with HDMI hub port u put ur signal in like 1 to 4,now go to that HDMI port hub,and will find ur dvd disc picture in playing in.

Apr 26, 2010 | Mitsubishi WD-52528 52" Television

1 Answer

DVD hooked up to sony bravia tv: have dvd power on, but can not get any set up menus (or anything) from dvd to show on tv screen.Unable to set up remote as menu does not appear on tv screen.


Hook up the player with RGB (Red-Green-Blue or component) cables and try the picture. If everything works OK, then go to the menu and turn on the HDMI output and set the resolution (if needed).
Not every HDMI unit works with every HDMI TV. You may also have a bad HDMI cable. On a DVD recorder, you may have your HDMI cable connected to HDMI IN. You must use HDMI out.

Mar 28, 2010 | Sony RDR-GX7 DVD Recorder

1 Answer

I have a z50p3 I tried to hook a samsung 1600


Sorry, man I have the same problem, with the same tv and player. Did you ever get a solution? LG Service Tech came out and his LG bluray player worked, whereas my Samsung didn't hooked to the TV. (It would spordically work going thru my HK254 AVR.)

He said either 1) the Samsung player was defaulting to a format that the Zenith being 3 years old could not decode (eg. 1080P) or that I might need to change inputs several times to get it to sync up or 3) by an LG Bluray player.

He said the Zenith was old and that newer sets are built with circuitry to help navigate the handshake easier. He couldn't find any service bulletins on it, and the one I got from LG he said didn't exist.

Feb 28, 2010 | Zenith Z50P3 50 in. Plasma TV

1 Answer

Sony str-dg820. having a problem getting video on tv


Hook up Composite / Component Monitor Out wire from receiver to TV video input because receiver will not change analog input into HDMI
You need to connect receiver and TV through analog video terminals as above.
Actually you are expecting that receiver will convert DVD player and Xbox analog video input into digital HDMI signal for TV and This is incorrect.

Jan 04, 2009 | Sony STR-DG820 Receiver

1 Answer

Hdmi not working


You need to set up the out put of your DVD player. First hook up a non hdmi output to the tv, either component or coax. You don't need to hook up the audio. You should get a picture from this connection. Then you can go into the menu and set your hdmi output to match your tv, probably 1080i. You may have to turn your volume up higher when using the hdmi cable than not. I hooked my audio up directly to a surround sound and don't use the tv's speakers.

Dec 01, 2007 | RCA DRC-285 DVD Player

Not finding what you are looking for?
Mintek DVD-1600 DVD Player Logo

Related Topics:

107 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mintek Televison & Video Experts

Ekse

Level 3 Expert

13434 Answers

Brad Brown

Level 3 Expert

18110 Answers

The Knight
The Knight

Level 3 Expert

76171 Answers

Are you a Mintek Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...