Question about Toshiba 36A40 36" TV

Open Question

How do I shut off tvgos

Someone sat on one of our two controllers. We have a DISH controller and a Toshiba CT-90235 TV Guide controller. This combination worked quite well for several years. Someone sat on or dropped one of controllers and TV screen prompted us to reset up TV. We didn't know how to answer some of the questions and now we have a screen that comes up whenever we turn on the TV that is basically a ********* box with 3 smaller screens on the left, one of them being the channel we want to watch. We have to hit "Exit" on the TV Guide controller for it to release us to the full screen of the program we want to watch. How do we turn off the TV guide feature so we can watch TV like we used to-- i.e.select a channel and the full screen comes up?

Posted by Anonymous on

Ad

5 Suggested Answers

Vista Electronics

  • 1694 Answers

SOURCE: remote control problems

Feed cable signal directly to tv(no BOX) activate auto-program for channel memory.

Posted on Oct 02, 2007

Ad

Anonymous

  • 1 Answer

SOURCE: 30HF85 TV with CT-877 remote, which doesn't work.

I had the same problem with my remote...over time it slowly stopped working. (sorry for poor terminology) I noticed that one of the battery terminals was corroded and that the metal connecting the battery to the board was completely gone. I simply swapped this out with one from another remote and now its working fine. Seems the only issue is that the battery was not connected.

I hope this helps.

Posted on Apr 05, 2008

Ad

Anonymous

  • 252 Answers

SOURCE: brightness on my tv quit workin

open your tv.At the back you see a plyback,it is big parts of tv with a wire attached to the picture tube,that is plyback At the buttom you wiil see a two knob, the lower knob is for the screen and the upper knob is for the focus.Adjust the lower knob or screen .

Posted on Nov 16, 2008

Chuck

  • 108 Answers

SOURCE: Black box showing up in center of tv

your closed caption feature is turn on and in the text mode. either turn off the closed captions or change it from text to cc1

Posted on Jan 08, 2009

bernardlunda

bernard lunda

  • 318 Answers

SOURCE: toshiba 35a44 problem

check the following power supply components
power transistor of the supply
zener diodes
rectifier diodes

Posted on Apr 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i program my t.v. with remote,toshiba ct 90326


Download the TV manual. The answer is already in Fixya
click here to take you there

or

http://www.fixya.com/support/t4663949-looking_instruction_manual_toshiba

Jan 04, 2013 | Toshiba CT-90326 Remote Control

1 Answer

My Dish Network remote control has quit working. I have fresh batteries and when I push on the SAT and TV buttons, they do not light up. 5.0 IR. 118575.


Hi, my name is Cheri Torres with DISH Network Customer Service. I came across your post recently and would like to help. If you have already replaced the batteries in your remote and still the SAT and TV buttons are not lighting up it sounds like you may need a new remote. You can try holding down either the SAT or the TV button for about 10 seconds to see if this will get either of them to light up. If that does not work you will need a new remote. You can either call into DISH Network at 1-800-333-3474 or you can email me with your account information (i.e. account number or phone number and name on the account) and I would be happy to get a remote sent out to you. You can also email me if you have any further questions or concerns and I'd be happy to assist you. Thanks! :)

Jan 25, 2011 | DISH Network IR Remote Control

1 Answer

My dishnetwork remote control 1 doesn't work. It worked fine yesterday. There is no problem for the battery. When I want to change channel or press guide button, sat light is on but I don't see response...


    • All DISH Network IR remotes
1. Goto System Info screen. You can enter the system info screen by either pressingthe system info button on the front of the DISH receiver box or by pressing thepower button once then the up arrow on the front of the receiver. If theseoptions are unsuccessful you can also open the smart card door on the front leftside of the receiver and pull out the smart card. 2. Onceyou are on the system info screen, hold down the SAT button until all modelights light up. 3. Entera number between 1 and 15 using the numeric keypad on the remote. 4. Pressthe pound (#) button 5. Oncethe SAT button blinks three times, press record. Note: If successful the number selected in step 3 willappear in the System Info screen under Remote Address.

Nov 30, 2010 | DISH Network IR Remote Control

1 Answer

TV Remote control


my remote control quite working - I have replaced batteries, but it still will not even turn on the tv.

Oct 12, 2008 | Toshiba MV13L3 13 in. TV/VCR Combo

9 Answers

CANT GET TOSHIBA CT 90302 TO PROGRAM


I had the same problem, and the solution above/below that says to use code 018 worked for me. Yeah!!!

Sep 01, 2008 | Kenwood RC-R0720 Remote Control

Not finding what you are looking for?
Toshiba 36A40 36" TV Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76237 Answers

matt martin
matt martin

Level 3 Expert

1257 Answers

Cindy Wells

Level 3 Expert

6073 Answers

Are you a Toshiba Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...