Question about Crosley CAWC529JQ Top Load Washer

1 Answer

Crosley top load washer will power on and that's

Crosley top load washer will power on and that's it

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Crosley Master
  • 17,130 Answers

It is possible that the machine does not start off the cycle because there are errors due to feedback from the inputs. For the program to start up the main program controller must initiate the INLET/MOTOR/DRAIN pump/ valve to open up and allow each function to be driven starting from the flow of water into the drum as also the drain valve to open to exit the water at the point of the program cycle. If this does not happen then the voltage at the valve/motor/pump must be checked or the fault relates to no voltage from the controller. This means the controller is a suspect. If the water flows though the inlet then the flow pressure should be good, if not the inlet valve is bad or there is dirt in the filter. Also check the flow at the inlet of the water line. Once the water comes into the system the WATER LEVEL SENSOR - normally a pressure switch- must activate at the preset/chosen level to give the signal to the program controller to switch on the motor. What is most important for the motor to start functioning is that the door switch must be ON when the door is shut or this will be an error for starting the motor for rinse and wash. Test a pressure switch: Click on : http://www.youtube.com/watch?v=HZZ2bDMspj8 Check this link to replace the inlet valve: http://www.espares.co.uk/advice/washing-machines/a/7/1408/how-to-replace-the-inlet-valve-on-a-washer-dr.html

Posted on Sep 04, 2014

Ad

2 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 105 Answers

SOURCE: Crosley caw5923mqd Top Load washer spins but leaves A LOT of water in the clothes

have you checked the pump out of the maachine
the pump may be blocked restricting water flow
if that is ok maybe you need to give the n
machine a hot wash the seals may be draging the spin down

Posted on Mar 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Spin light is blinking on my crosley washer


check belt is not Brocken filter is cleaned also can be the motor not turning check brushes or that the motor is not burned

Aug 13, 2014 | Crosley caw9244xq 3.4 cubic foot white...

1 Answer

Crosley CAW9244XQ top load washer


need a replacement plug where can I find one

May 05, 2012 | Crosley CAWC529JQ Top Load Washer

2 Answers

How to bypass lid switch


uplug power. remove switch, then tape the wires together. this will make a complete curcuit, so it should run. good-day !

Mar 29, 2012 | Crosley CAWC529JQ Top Load Washer

1 Answer

I have a crosley cw5500w top load washer, it is filling very slowly despite adequate water pressure. Is there an inline filter that could be clogged?


Yes their are inlet filter screens where the fill hoses hook up to the washer if you shut off the water at the wall and remove the hoses at the unit and look and you will see them carefully pop them out and clean,,,And you will be back in operation

Sep 16, 2010 | Crosley CW5000 Front Load Washer

1 Answer

Crosley CAWC529JQ1 top load washer sounds like a cement mixer!


sounds lik the main bearings are faulty and needs a strip down to replace parts otherwise another machine may be in order

Nov 21, 2007 | Crosley CAWC529JQ Top Load Washer

1 Answer

Crosley caw5923mqd Top Load washer spins but leaves A LOT of water in the clothes


have you checked the pump out of the maachine
the pump may be blocked restricting water flow
if that is ok maybe you need to give the n
machine a hot wash the seals may be draging the spin down

Oct 12, 2007 | Crosley CAWC529JQ Top Load Washer

Not finding what you are looking for?
Crosley CAWC529JQ Top Load Washer Logo

216 people viewed this question

Ask a Question

Usually answered in minutes!

Top Crosley Washing Machines Experts

peter gittos
peter gittos

Level 2 Expert

247 Answers

jdthefixer

Level 3 Expert

746 Answers

Derek Bannister
Derek Bannister

Level 2 Expert

101 Answers

Are you a Crosley Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...