Question about Powermatic 2 Electric Cigarette Injector Machine

3 Answers

HOW TO REPAIR POWERMATIC 2 CIGARETTE MACHINE

WHEN I PULL DOWN THE HANDLE THE SPOON GOES IN AND OUT SEVERAL TIMES BEFORE STOPING IN A DIFFERENT SPOT EVERY TIME

Posted by on

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

The machine came on when u pushed level down the part u put tubes on was not sliding out i took apart need help putting it back together properly

Posted on Jun 27, 2015

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 16 Answers

That's right, if it is within it's warranty period, return it. On the other hand if it is out of warranty and you are somewhat mechanically inclined, you can open it up. The screws are in the bottom of the unit under the feet. Take them out, open it up and you will see there are connector(s) on the circuit board you see 1st. Unplug the connectors, clean things up as you go also. Do take note of the orientation of the connectors. Once that board is out, you will see another smaller one under it, and the motor w/mechanical parts attached. The small circuit board is the optic that senses the position, likely has tobacco dust obstructing it. Either remove it and dust it off, or use some canned air and blow things out. While in that far, check the mechanical parts for wear, they should not be too loose. There is play in them, but not sloppy. Hope that helps :)

Posted on Dec 19, 2014

  • 2 more comments 
  • Roy Bommarito
    Roy Bommarito Jul 16, 2018

    yup I know 2014 and now it's 2018! Bought mine in 2014 and now HAD trouble with it 4+ yrs of service. Now it's back together and working like new. THANK YOU!

  • brainstorm21
    brainstorm21 Apr 23, 2019

    Yes, helpful information

  • Daniel Karkusiewicz
    Daniel Karkusiewicz Aug 28, 2019

    I'll see if that helps with the trouble I'm having where the tube holder releases too soon and the cigarette doesn't get filled to the filter

  • Daniel Karkusiewicz
    Daniel Karkusiewicz Aug 28, 2019

    Unfortunately, that didn't do it. Now it releases even earlier than before

×

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

Sounds like an electrical problem. Return it the powermatic 2 has a 1 year warranty.

Posted on Dec 15, 2014

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need user guide for a powermatic 2 cigarette injector machine


Contact vendors on Amazon.com or other sites:

Example:

https://www.fandfwholesale.com/powermatic-ii-electric-cigarette-injector-machine.html

Quoting from link above:
"Powermatic II Cigarette Injector is an electric, spoon fed injector and the first product of its kind we've carried in quite a while. We have been very impressed with the function and ease this product offers. The spoon fed style of this injector eliminates many of the issues that other auger driven injectors have. This machine will make both king size and 100 mm tubes and features electronic jam protection to ensure that that the machine does not break from overfilling the chamber. The compact and lightweight design of this machine allows for easy use and storage. The large tobacco fed hopper and removable tobacco tray, will be sure to have you rolling cigarettes in three easy steps. 1. Plug in and turn on the power. 2. Lift the lever and fill the tobacco evenly. 3. Press the lever fully down to start filling your tubes. The product includes accessories to clean your machine and comes with a 1 year manufacturers warranty. Please fill out warranty card and mail in upon receiving machine. Machines cannot be sent back to Smokers Outlet Online, Inc. for refund or credit. -------------------------------------------------------------------------------- For Warranty service, all machines must be sent to: Powermatic Service Center 17005 Evergreen Place Suite B City of Industry, CA 91745 1-626-964-5678 zico.com@verizon.net"

Aug 17, 2018 | Cooking

1 Answer

Need a replacement part for my powermatic ii+ cigarette injector machine?


parts are not available . throw away and buy a new unit

Dec 19, 2017 | Cars & Trucks

1 Answer

The machine got jammed and I heard it snap so I know it broke. this is the 2nd machine I have bought in 2yrs. I try not to put too much tobacco in there but it snapped. How can this be repaired?


you are loading way too tightly, do not force when pushing the handle down, if you have too you are over packing. I have loaded 200 cartons of cigs on these machines and never broken a thing

Oct 04, 2016 | Powermatic 2 Electric Cigarette Injector...

3 Answers

Were can i find replacment parts in utah for the powermatic 2 electric cigarette machine


Type that question just like you said it in the search engine address bar and hit enter. You will probably see matches.

I’m happy to help further over the phone at https://www.6ya.com/expert/tami_f8d2d553d5094045

Aug 07, 2016 | Powermatic 2 Electric Cigarette Injector...

1 Answer

WHEN I PULL DOWN THE HANDLE THE SPOON GOES IN AND OUT SEVERAL TIMES BEFORE STOPING IN A DIFFERENT SPOT EVERY TIME


you are cars and trucks catagory and nothing on a car or truck has a spoon
IT is confusing because you never bothered to give any details like , make , model , year , type of equipment etc
as posts are not linked post again with the details

May 24, 2016 | Cars & Trucks

2 Answers

I need a diagram of the components inside my powermatic 2 roller and where each component goes?


Google "photo's of powermatic II cigarette machine " This should bring up a myriad of all images google has of this machine . There is a You tube video Although it is grainy and doesn't show everything . There is no PDF that I could find . The machine shares a name with a famous wood working machine brand . And that is the only PDF user manuals out there .

May 11, 2016 | Powermatic 2 Electric Cigarette Injector...

1 Answer

Need to know what moves the thing that holds the tubes on the machine


It is called the "cigarette holder" and has a replaceable "rubber bumper" on the end. Powermatic will send you a new one if you call when it does not hold the paper on as well as new.
http://powermaticinjector.com/c2instruct.asp

Jan 04, 2016 | Powermatic 2 Electric Cigarette Injector...

1 Answer

Everything works but the piece that holds the tube on?


It is called the "cigarette holder" and has a replaceable "rubber bumper" on the end. Powermatic will send you a new one if you call when it does not hold the paper on as well as new.
http://powermaticinjector.com/c2instruct.asp

Jan 04, 2016 | Powermatic 2 Electric Cigarette Injector...

2 Answers

Can I buy a power cord for a Powematic 2 cigarette machine ?


If you have a laptop cord thats 2 piece you can use the first part of the cord to run your machine just tried it and it works.

Dec 15, 2015 | Powermatic 2 Electric Cigarette Injector...

Not finding what you are looking for?
Powermatic 2 Electric Cigarette Injector Machine Logo

Related Topics:

7,186 people viewed this question

Ask a Question

Usually answered in minutes!

Top Powermatic Cooking Experts

Frank Hunter
Frank Hunter

Level 1 Expert

30 Answers

ray gallant
ray gallant

Level 3 Expert

65447 Answers

Brad Brown

Level 3 Expert

18121 Answers

Are you a Powermatic Cooking Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...