Question about Kenmore Elite HE4 Electric Dryer

Open Question

How do I remove control panel on Kenmore he3 electric dryer

He3 electric dryer

Posted by Anonymous on

Ad

5 Suggested Answers

Anonymous

  • 16 Answers

SOURCE: Kenmore Elite HE3 dryer stays cold

you probably need a new heater element.

Posted on Dec 13, 2008


Anonymous

  • 3 Answers

SOURCE: Kenmore Elite He3 electrical dryer runs but it does not heat up

odd but it worked for me!! Try resetting the circuit breaker. It will not appear to have blown, this is because only 1/2 the breaker needs resetting, This is much cheaper to try before calling for service or parts. My 2002 E3t has only had this problem once and the resetting worked without further issues for 2 years now. Good luck

Posted on Jan 29, 2009

Ad

mike cooksey

  • 163 Answers

SOURCE: Kenmore Elite HE3 Dryer clothes not dry after cycle

it sounds like a clog in vent.if yours vents up thru roof you may need to have a chimney sweep come out and sweep vent.check and make sure the vent hose is net kinked or full of lint.

Posted on Mar 06, 2009

Donni Steen

  • 687 Answers

SOURCE: My kenmore elite he3 electric dryer control panel

The control board is bad. You will have to replace it. You might aslo theck the fuse, sometimes they look a little different than you are used to. Refer to your owners manual and wiring diagram to find it. You can also find more info on the Whirlpool website. Whirlpool makes Kenmore.

Posted on Apr 10, 2009

localwonder

Michael Masters

  • 6784 Answers

SOURCE: Kenmore Elite HE3 Dryer PF on control panel,

HI, there may have been a slight power failure within the home breaker unit or the dryer may have lost power to the control for some sort of reason.

I recommend a thorough inspection of the terminal block on the back side of this unit. make sure the power cord is attached tightly and the wall outlet is secure and holding the power cord correctly. if everything looks great with the terminal block and the power cord is plugged in the outlet correctly, simply unplug this unit for 5 minutes to reset the control. after the 5 minutes are up, plug the unit in once more and the PF alert should reset.

Make sure the breaker box in your home is working properly. (the actual breaker switch for the dryer must be in the on position)


Posted on Apr 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sears Electric Dryer is flashing F01 What is wrong?


The F01 indicates a failed electronic machine control board. This error code can sometimes be caused by a glitch or power surge through the electrical lines. You may be able to clear this code by unplugging the washer for 5 minutes. If the code returns after plugging the washer back in, then the electronic machine control board will need to be replaced.
You can order a new control board from the Sears PartsDirect website.
http://www.searspartsdirect.com/partsdir...
Here's how to do it: http://media.fotki.com/1_p,wkwdftgtbkdgf...


Error code on dryer F01 - Kenmore Elite HE3 Dryer - iFixit

https://www.ifixit.com/.../Error+code+on+dryer+F01 Traduire cette page The F01 indicates a failed electronic machine control board. This error code can ... The Kenmore Elite HE3 is 7.2 cu. ft. capacity electric dryer by Kenmore.

Dryer Sears / Kenmore HE3 - F01 Error Code Main Circuit ...

2q==? 7:35 https://www.youtube.com/watch?v=eWqrn5klxm0 20 avr. 2015 - Ajout? par Jim Dandy Sears Kenmore Dryer Model HE3 - F01 Error Code. Main Circuit Board Repair - Electronic Control Board ...

Error code F1 on Kenmore HE2 electric dryer appeared ...

www.shopyourway.com > ... > Questions Traduire cette page Sears Kenmore HE2 electric dryer; model #11087571601. F1 error message appeared ... Power it back up and see if you still get the F01 error code. If not, then I ...

What does the error code F-01 mean on my Kenmore front ...

www.shopyourway.com > ... > Questions Traduire cette page By unplugging and plugging in the electrical cord, I got the dryer to work again. ... What does the error code F-01 mean on my Kenmore front loaded HE2 dryer? ... My kenmore washing machine 110.46462500 is flashing an error code F.01 ...

Error code on dryer F01 - Kenmore Elite HE3 Dryer - iFixit

https://www.ifixit.com/.../Error+code+on+dryer+F01 Traduire cette page The F01 indicates a failed electronic machine control board. This error code can ... The Kenmore Elite HE3 is 7.2 cu. ft. capacity electric dryer by Kenmore.

Dryer Sears / Kenmore HE3 - F01 Error Code Main Circuit ...

2q==? 7:35 https://www.youtube.com/watch?v=eWqrn5klxm0 20 avr. 2015 - Ajout? par Jim Dandy Sears Kenmore Dryer Model HE3 - F01 Error Code. Main Circuit Board Repair - Electronic Control Board ...

Error code F1 on Kenmore HE2 electric dryer appeared ...

www.shopyourway.com > ... > Questions Traduire cette page Sears Kenmore HE2 electric dryer; model #11087571601. F1 error message appeared ... Power it back up and see if you still get the F01 error code. If not, then I ...

What does the error code F-01 mean on my Kenmore front ...

www.shopyourway.com > ... > Questions Traduire cette page By unplugging and plugging in the electrical cord, I got the dryer to work again. ... What does the error code F-01 mean on my Kenmore front loaded HE2 dryer? ... My kenmore washing machine 110.46462500 is flashing an error code F.01 ...

Feb 04, 2016 | Sears Kenmore Elite Electric Dryer 69278

1 Answer

Sears he3 electric dryer flashes F70


This is an overheating issue. The dryer needs to be cleaned at least once a year. This means pull the bottom panel off that is under the door and vacuum out all the lint. Then clean the outlet and duct work that it connects to. There are some other causes but that should take care of it.

Jun 25, 2014 | Kenmore Elite HE3 Steam 8674 Dryer

1 Answer

What is wrong with my Kenmore Elite Quiet Pak 4 HE3 Electric Dryer?


Might be a2 things: Vent blockage causing overheat OR bad thermistor. Repair clinic shows how to replace it:

PART AND VIDEO

Note: Make sure you order the correct thermistor for your dryer

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Dec 05, 2012 | Dryers

1 Answer

He3 8519320a dryer dosnot heat up


Hi, If you are having problems with your gas dryer not heatingthe most common problem is that the ignitor goes bad. Even though it glowssometimes it is still not working properly. if you dryer is gas check out this gas no heat tip.... If you have an electric dryer, you can have many differentthings that can go wrong causing the dryer not to heat. check outthis electric no heat tip...

heatman101';
';

Jun 13, 2011 | Kenmore Elite HE3 Steam 8674 Dryer

1 Answer

My kenmore elite he3 dryer has quit heating could it be the heating element and if so where can i find it on the dryer? The model # is 110.82822103 and the serial# is MR1751757


Hi,

If you are having problems with your gas dryer not heating the most common problem is that the ignitor goes bad. Even though it glows sometimes it is still not working properly.



if you dryer is gas check out this gas no heat tip....



If you have an electric dryer, you can have many different things that can go wrong causing the dryer not to heat.



check out this electric no heat tip...


heatman101
][][][][][][][][][][][][][][][][][][][][][][

Jun 05, 2010 | Kenmore Elite HE3 Steam 8674 Dryer

1 Answer

He3 electric dryer : no heat


Heater Element needs to replaced. Accessing from the back panel.

Jan 09, 2010 | Kenmore 82822 Electric Dryer

1 Answer

Kenmore Elite He3 dryer..fine on timed but leaves cloths wet auto


find the metal sensors in the drum
scratchem up with sand paper

especially if you wash rugs, sneakers , or anything with acyrlic

Oct 05, 2009 | Kenmore Elite HE4 Electric Dryer

1 Answer

He3 gas dryer quit heating


Hi, If you are having problems with your gas dryer not heatingthe most common problem is that the ignitor goes bad. Even though it glowssometimes it is still not working properly. if you dryer is gas check out this gas no heat tip.... If you have an electric dryer, you can have many differentthings that can go wrong causing the dryer not to heat. check out this electric no heat tip...

heatman101
rtgh

Aug 25, 2009 | Kenmore Elite HE3 Steam 8674 Dryer

1 Answer

Kenmore Elite HE3 dryer stays cold


you probably need a new heater element.

Dec 12, 2008 | Kenmore 82822 Electric Dryer

Not finding what you are looking for?
Kenmore Elite HE4 Electric Dryer Logo

Related Topics:

324 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Dryers Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Ned Halaweh
Ned Halaweh

Level 2 Expert

240 Answers

Brad Brown

Level 3 Expert

18165 Answers

Are you a Kenmore Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...