Question about Kenneth Cole Unlisted Ana-Digi watch
Posted by Anonymous on
Your watch has two battery.
one battery for Digital
other one for Analogue
perhaps battery for analogue died
you need to change one battery
Posted on Nov 26, 2014
I just dug my watch out after not wearing for a few years and had the same problem. There is an easy way to adust this watch's time and alarm, basically one way to enter both.
1) With the watch in the regular time display mode (doesn't matter if 12 hour or military time), depress and hold the lower left hand button (mode button). After a few seconds the watch appears to shift to alarm mode and it is blinking. This puts you into the mode for adjusting the alarm.
2) If you want to adjust time, date, etc rather than alarm time, after you have done step one, simply press that same lower left button again, and then it will put you into the time mode, but this time the time mode is blinking and you can adjust the various components (seconds, minutes, hours). You can only move minutes, hours, etc forward, no way to move backward. You will start off with the second display blinking, probably skip that unless you need to adjust seconds. Depress the upper right button to shift to the next option (minutes) and you will see the minute display blinking. Adjust the minutes by depressing the lower right button. When finished depress upper right button to move to next option (hours) depress the lower right button to move the minutes/hours/month/date forward as necessary, when you finish just press the lower left button again and it pulls you out of adjust mode and you are back in regular time viewing.
I had to post this because I've had this problem in the past and it killed me. Its kind of intuititve after you get into the adjusting mode by pressing the lower left button- remember, initially it will put you into adjust alarm mode, but press again and you will get into adjust time mode.
Posted on Nov 12, 2008
Self winding watched should not need to be wound as long as they are being worn.
To tell if the self winding mechanism is working, hold the watch close to your ear (hold it vertical, as though it was on your wrist) and rock it gently. You should be able to hear a ratchet operating (a soft clicking noise).
I can't help thinking your suspicion about the mechanism having failed, sound very likely.
Posted on Jan 07, 2010
Good day Sir, The winder has two click points ...
1.pull out to the 1st click point to set the date.
2.Pull out to the 2nd click point to set the time.
have a nice day.
Posted on Jul 28, 2010
SOURCE: I just purchased an Unlisted
It does seem strange that no instructions come with your watch, although this seems to be a fairly common problem.
If your watch has only a crown wheel and no other buttons, perhaps they feel that instructions are not needed.
In any case, the crown wheel should not come out when you pull it, as this is clearly what you are intended to do in order to set the time.
I think you have a faulty product and suggest that you return it to the supplier and ask for a replacement. Even a cheap watch should work! I have bought several cheap watches and they have always worked for years.
Posted on Oct 31, 2010
Tips for a great answer:
Oct 13, 2014 | Kenneth Cole KC1296 Watch
Aug 28, 2014 | Kenneth Cole Unlisted Ana-Digi watch
Jul 28, 2014 | Kenneth Cole Unlisted Chronograph Watch
Jun 24, 2013 | Kenneth Cole Watches
Sep 20, 2011 | Watches
Oct 18, 2010 | Kenneth Cole Watches
Mar 30, 2010 | Kenneth Cole 1213 Wrist Watch
Feb 22, 2010 | Kenneth Cole Watches
523 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: