Question about Hobart H600 Stand Mixer

Open Question

HOW DO YOU CHANGE THE MOTOR ON HOBART H 600 mixer . URGENT

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
bigg t

anthony james

  • 640 Answers

SOURCE: hobart mixer

Please be more specific of what part you need.Whats the problem with the mixer?Im a hobart tech and service these mixers often.

Posted on Feb 19, 2008

Ad

Anonymous

  • 135 Answers

SOURCE: Need replacement motor for Hobart M-802 mixer

Hi Dan. Two options. The first is to call Hobart and ask about a temporary replacement mixer while your original motor is being rebuilt. They'll charge you for it, if they will do it at all. If Hobart is doing the rebuilding, they might give you a better price or a free loaner.

Second. eBay often lists hobart motors for sale, you might get lucky and find one quickly. Since you absolutely must have a working mixer for your business, you might consider having a spare motor on hand for just such an occaision.

If this solution has assisted you, please rate it. Good luck! ricardok45

Posted on May 05, 2009

milten1

milten1

  • 1304 Answers

SOURCE: how do you change the oil in a hobart h 600-dt

there is an oil case drain pulg under the top by the clutch, you can drain the motor housing through there, \
i have used 5w30 in a pinch
but it would be better if you ordered hobart oil from the website
its cheap but very very good

Posted on Oct 16, 2009

monomoy

  • 110 Answers

SOURCE: PLEASE HOW TO CHANGE OIL OF A HOBART MIXER

underneath trans. you will find a drain plug remove, drain oil,replace plug ck the sight glass @ this time if not clear would recommend replacing glass remove top cover where the front cover screw theaded into remove that is your fill hole. add new oil till you hit level line in sight glass,reassemble

Posted on Jan 09, 2010

monomoy

  • 110 Answers

SOURCE: what is error code 99

error 99 stands for communication fault between timer board and the sr drive.there are 5 things that can cause this error.1.rs-485 cable disconnected or malfunction 2.1 con monitordisconnected or malfunction. 3.run/stop wiring disconnected or malfunction. 4.timer board malfunction. 5.sr drive malfunction. hope this helps, dont forget to vote, thanks, monomoy

Posted on Feb 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HELLO, My name is Timothy and I got a motor repaired for the Hobart H 600 stand mixer and I need to ask one Question. What is the gear oil that this model takes as I lost some of the gear oil during...


Planetary takes six ounces 150 weight gear oil if completely drained (i.e. Exxon Spartan EP 150 or equivalent). Transmission uses one gallon 460 weight (yeah, 460 weight!) gear oil (Exxon Spartan EP 460 or equivalent).

Jan 25, 2011 | Hobart HL600 Legacy Stand Mixer

1 Answer

How do you change the oil in a hobart h 600-dt dough mixer & what type of oil do you use ?


there is an oil case drain pulg under the top by the clutch, you can drain the motor housing through there, \
i have used 5w30 in a pinch
but it would be better if you ordered hobart oil from the website
its cheap but very very good

Oct 15, 2009 | Hobart H600 Stand Mixer

1 Answer

HOBART HL 600 NOT WORKING.SPEED & TIMMER ALL LIGHTS WORKING BUT NO MOTOR FUNCTIONS.


What'd ya do to that poor little workhorse? You need a Hobart service guy. The power is not getting from the switch to the motor. Could be a disconnected wire (on the simple side), could be the start capacitor. Did you turn the timer on? If you don't the mixer won't run! That is a 220V, don't stick your hands in there when it is plugged in.

Sep 01, 2009 | Hobart H600 Stand Mixer

2 Answers

Hobart D300 Mixer, Will not shift from 2nd to 1st gear without coming to full stop, Ideas as to source of problem? It also seems to be making increased noise.


Hobart mixers are NOT designed to change gears while operating. The Hobart planetary gears are like the transmission in your car but, without the clutch. Everytime you change gears while unit is running you are tearing up the brass spacers, gears & seals. Time to call a QUALIFIED service tech to come out & sell you another planetary or rebuild your old one, about $2K, Buy a Varimixer if you want to change gears while unit is running, they use belts. Another planetary premature failur cause, over loading the bowl. Batters & icings- 75% bowl capacity, Dough 65% bowl capacity.

Jul 23, 2009 | Hobart D300 Stand Mixer

1 Answer

Hobart H-600-T Mixer Shuts down while mixing bread dough


What you replaced were the contacts on the overload,correct?These 'heaters' look like springs?If so you have other issues.I'm a hobart tech and repair these mixers often.Are you mixing pizza dough?

Mar 06, 2009 | Hobart H600 Stand Mixer

3 Answers

Oil change for hobart h-600 mixer


Needed to know which part to open up to add or change oil on Hobart Mixer h-600

Mar 05, 2009 | Hobart H600 Stand Mixer

1 Answer

Hobart N50 Tripped


The reset button is to protect over amping the motor. The N-50 is not a very strong unit, (commercially), but you won't break a gear. If you overload the unit, you'll either trip the overload (reset button), or you will break the taper pin that attaches the planetary to the center shaft.

If you're looking for a small commercial unit, and you're in the US, look into the 10 qt Precision Mixer.

Apr 04, 2008 | Hobart N50 Stand Mixer

Not finding what you are looking for?
Hobart H600 Stand Mixer Logo

Related Topics:

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hobart Food Mixers Experts

Ross Keen

Level 3 Expert

1363 Answers

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Bruce Showalter

Level 2 Expert

133 Answers

Are you a Hobart Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...