Question about Kyocera FS-1118MFP Laser Printer

1 Answer

What is Toner Cover and how can open

Kyocera FS-1118MFP Laser Printer comes error c6000 and what is toner cover?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 25 Answers

Usually when we say toner cover, we mean the top cover, which is the cover we open to change the toner kit (catridge).
The error C-6000 refers to the fuser unit. You have to remove the fuser unit and check if the heater lamp and/or the thermistor and/or the thermostat are damaged.

Posted on Sep 28, 2014

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 66 Answers

SOURCE: I have a FS-1118 MFP

yyou have to be careful when doing this.
the waste toner is built in to the process unit (drum unit) and has a plug on the side.
remove the plug and tip it out.

Posted on Mar 10, 2009

acdr

kishor khatri

  • 1913 Answers

SOURCE: I have a Kyocera FS-2000D printer that will not print

first turn off your pritner power.
check open the front door pull your ink cartridge then clean dust and blur from it then check there is not any paper jam then refix ink cartridge.then turn on the power.

Posted on Mar 21, 2009

versa093

  • 46 Answers

SOURCE: Error occurred. Call servoce person. C7980

Waste toner reservoir overflow problem (when the total number of copies is less than 100 thousand sheets) You need a new pcu

Posted on Jun 12, 2009

n25an

Norman Davis

  • 622 Answers

SOURCE: Kyocera FS-3900 and FS-4000 Prints very faint. New printers affected

sounds good

I’m happy to assist further over the phone at https://www.6ya.com/expert/norman_d2fa496dce30c65d

Posted on Dec 24, 2009

ryanguy19

  • 62 Answers

SOURCE: Kyocera laser printer toner refill

refill...uh oh probably wouldnt try it..there's is like only 1 company that does kyocera refill toners.....call KATUN... you can try to find that on the internet..you most likely willl have to buy actuall kyocera toner..

Posted on Feb 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I unlock my printer a Kyocera fs 1118mfp when error C6000 appears?


Press the system menu/counter key,Select Service setting using the up/down cursor keys.While pressing the start key and the # key, press the enter key.then select 163 Resetting the fusing problem data Description Resets the detection of a service call code indicating a problem in the fusing section. When a service call concerning the fusing section occurs, turn the power switch off and open the front cover. Then, turn the power switch on and press the system menu/counter key to enter the maintenance mode. Purpose To prevent accidents due to an abnormally high fusing temperature. Method 1. Press the enter key. A selection item appears. 2. Select Execute using the up/down cursor keys. 3. Press the enter key. The fusing problem data is initialized. (Four service calls, namely C6000, C6020, C6050, and C6400 are reset.) Completion Press the back key. The indication for selecting a maintenance item No. appears.

Mar 27, 2015 | Kyocera FS-1118MFP Laser Printer

1 Answer

ERROR COD C6000


Works with ERROR C6000, C6300, C6400

Switch off
Open Toner Cover
Switch on, holding "System Menu"
Go to "Secure Setting"
"Enter"
Hold "Start" "#" "Enter"
Scoll down to "Maintenance Mode"
"Enter"
Scoll down to "U163"
Scoll do "Execute"
"Enter"
Close Toner Cover
Leave run for a few seconds
Switch off
Switch on....

I’m happy to help further over the phone at https://www.6ya.com/expert/ron_9356d26241d4cbf7

May 04, 2014 | Kyocera FS-1118 Printer

1 Answer

How to remove left and side casing from kyocera fs-c5025n please


FS-C5025N left cover removal.


1. Open the rear cover.

2. Open the top cover.

3. Remove the opening and closing axis from the main unit frame and then remove the top cover. It pry's out at the hinges.

4. Open the left side cover and then remove the one screw.

5. Remove the waste toner box. To remove waste toner box, press the lock lever in.

6. Remove the paper feed unit .

Feb 18, 2011 | Kyocera FS-5025N Laser Printer

3 Answers

Error occurred. call service person c7980 printer


try unpluging it(the power and the usb), count to 15 and plug back in

Jan 25, 2011 | Kyocera FS-1118MFP Laser Printer

1 Answer

Error on kyocera C7980...how do i clean out toner well?


The toner waste container on this model is not designed to be cleaned out by the user. It is located on the Drum assy. If you did want to clean it you would first have to open the main cover (like you were going to add a new toner cart.) Remove the Developer unit (the one the toner is attached too). Then to remove the drum assy grab it by the two green handles and pull it out. The part that faces the back of the unit is were the toner is stored if you remove one of the sides you might be able to get the toner out. Be very careful do not use a vacuum unless you have a filter that can filter as small as .03 microns. The toner is main reason this is not recommended because its so small and not good for your health. The drum assy is rated for 100k copies. Usaully last about 70k to 80k before the message you got comes up.
Hope this helps if you have any more questions just ask.

Aug 14, 2010 | Kyocera FS-1118MFP Laser Printer

1 Answer

How to remove Kyocera FS-2000D drum?


open top cover then pull the developer unit (toner box ) then open left cover remove the waist toner box ..... there you can find a Grey color lock push and pull the full unit

for manual send mail to anantakumarjena0@gmail.com

Nov 30, 2009 | Kyocera FS-2000D Laser Printer

1 Answer

Error occurred. Call servoce person. C7980


Waste toner reservoir overflow problem (when the total number of copies is less than 100 thousand sheets) You need a new pcu

Jun 05, 2009 | Kyocera FS-1118MFP Laser Printer

2 Answers

I am getting Call Service 7410:00 32266 on FS-3900DN Kyocera Laser Printer.


You have pulled the drum unit out of position possably after changing the waist toner ? Open the back cover, open the frunt cover and remove the developer unit, the full unit not just the toner, open the side cover where the waist toner bottle is and push the drum unit back into place until it clicks, put the dev unit back in place and close everything reboot the machine

Apr 18, 2009 | Kyocera FS-3900DN Laser Printer

1 Answer

I have a FS-1118 MFP Kyocera printer it has refused to print and the error message is that the waste toner is full how can i empty the waste toner?


yyou have to be careful when doing this.
the waste toner is built in to the process unit (drum unit) and has a plug on the side.
remove the plug and tip it out.

Jan 21, 2009 | Kyocera FS-1118MFP Laser Printer

Not finding what you are looking for?
Kyocera FS-1118MFP Laser Printer Logo

143 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kyocera Office Equipment & Supplies Experts

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers

CheckitRight
CheckitRight

Level 3 Expert

1363 Answers

Marvin
Marvin

Level 3 Expert

85216 Answers

Are you a Kyocera Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...