Question about Lexmark X4650 InkJet Printer

Open Question

Cartridge Error. Removed black cartridge, printer works.Reinstall cartridge printer don't work and cartridge error message appears.

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 1 Answer

SOURCE: Black Ink Cartridge error

i ended up putting a color and black cartridge in and everything is fine.

Posted on Mar 28, 2008

Ad
Roop1980

Roopesh S

  • 228 Answers

SOURCE: error:2200

“Lexmark does not support the refilling of its ink cartridges. Refilling the ink cartridges can cause them to leak, thus clogging or even damaging the print head. Any damage to your printer caused by refilled ink cartridges may not be covered under warranty”. Please use genuine Lexmark cartridges for best results.

Posted on May 14, 2009

PrintDocta

  • 217 Answers

SOURCE: error 31 lexmark e350d

Possible causes here are;

Most likely, the contacts in the printer not touching the chip properly (hence why it works in another printer). A simple gentle 'tweak' would work in this case.

The other possibility is the firmware version of the (offendig) printer being incompatible with the version of the after-market chip you are using. No solution here, other than trying a DIFFERENT MAKE of chip.

Posted on Apr 05, 2010

anjcivils

  • 1 Answer

SOURCE: Is it possible to refill ink cartridge on Lexmark x6690 printer?

Take out all cartridges, switch printer off and then on again and let printer see that there are no cartridges. Do this 5 times, it resets the cartridges. Then install refilled cartridges

Posted on Dec 27, 2011

printmastert

Lexmark

  • 3344 Answers

Creating Customers For Life

    Verified Fixya Pro

    SOURCE: Cartridge Error - see user manual

    It seems that you have tried most of the troubleshooting steps to identify and fix the problem. But try to replace your black cartridge with a new genuine Lexmark cartridge to determine if it's a faulty cartridge issue.
    You may also contact Lexmark Technical Support Center for additional assistance.

    Posted on Jan 24, 2012

    Add Your Answer

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    1 Answer

    Hp4355 print catridge error


    Each cartridge having printing life, as long as cartridge health condition is good it won't gives any trouble. Subjected series printer having mono & colour cartridges,1. Remove both cartridge from the printer 2. Switch on & wait till message appears for insert the cartridges..3. Insert mono(Black) cartridge, close the door & wait till message appears on screen. If message appears same as cartridge error mean that mono cartridge is faulty replace it, if message appears like insert another cartridge, it's confirmed that colour cartridge faulty.. Replace it..

    Apr 28, 2012 | HP Officejet 4355 All-In-One InkJet...

    1 Answer

    Cartridge error 50C


    Hi there Error 50c

    RegOk hope it works.
    arding the Dell A940 "Error 50c"....the user guide doesn't seem to mention "Error 50c". They do, however, mention a "Cartridge Error" on page 52 of the manual. They claim this means that the printer has detected a short circuit (fuse/resister) in the cartridge. As you may or may not have noticed in the manual, this is what they recommend doing about it:

    1) Press Power to turn the printer off.

    2) Lift the printer cover/lid (scanner unit) until the scanner support holds it open.

    3) Turn the printer on.
    The ink cartridge carrier moves and stops at the loading position unless the printer is busy.

    4) Remove the color ink cartridge.

    5) Lower the printer (scanner unit) until it is completely closed.
    If the error message displays again, replace the black cartridge with a new black cartridge.

    If the error message does not display, repeat steps 1–3 and then go to step 6.

    6) Reinstall the color cartridge and remove the black ink cartridge.

    7) Lower the printer (scanner unit) until it is completely closed.

    If the error message displays again, replace the color cartridge with a new
    color cartridge.
    If there is no error message (indicated by flashing lights), repeat steps 1–3 and then reinstall both ink cartridges.
    8) Lower the printer (scanner unit) until it is completely closed.

    If you get the error message again, while both cartridges are installed, replace both of the cartridges.

    Basically, what they want you to determine is,....if the short circuit is with the "black ink" cartridge or the "color ink" cartridge and then replace the cartridge that has the problem.

    You may have to buy a new cartrige.
    Please all I ask is call back and just gave a vote, it will gave me some satisfaction to know am helping some one, so I will keep on helping.
    All The Best: Pineworks

    Mar 16, 2010 | Dell A940 All-In-One InkJet Printer

    1 Answer

    I GET AN ERROR 50C


    Hi there Error 50c
    Ok haoe a go should work

    Regarding the Dell A940 "Error 50c"....the user guide doesn't seem to mention "Error 50c". They do, however, mention a "Cartridge Error" on page 52 of the manual. They claim this means that the printer has detected a short circuit (fuse/resister) in the cartridge. As you may or may not have noticed in the manual, this is what they recommend doing about it:

    1) Press Power to turn the printer off.

    2) Lift the printer cover/lid (scanner unit) until the scanner support holds it open.

    3) Turn the printer on.
    The ink cartridge carrier moves and stops at the loading position unless the printer is busy.

    4) Remove the color ink cartridge.

    5) Lower the printer (scanner unit) until it is completely closed.
    If the error message displays again, replace the black cartridge with a new black cartridge.

    If the error message does not display, repeat steps 1–3 and then go to step 6.

    6) Reinstall the color cartridge and remove the black ink cartridge.

    7) Lower the printer (scanner unit) until it is completely closed.

    If the error message displays again, replace the color cartridge with a new
    color cartridge.
    If there is no error message (indicated by flashing lights), repeat steps 1–3 and then reinstall both ink cartridges.
    8) Lower the printer (scanner unit) until it is completely closed.

    If you get the error message again, while both cartridges are installed, replace both of the cartridges.

    Basically, what they want you to determine is,....if the short circuit is with the "black ink" cartridge or the "color ink" cartridge and then replace the cartridge that has the problem.

    You may have to buy a new cartrige.
    Please all I ask is call back and just gave a vote, it will gave me some satisfaction to know am helping some one, so I will keep on helping.
    All The Best: Pineworks

    Mar 07, 2010 | Dell A940 All-In-One InkJet Printer

    1 Answer

    Cartridge error 50C


    Hi there Error 50c
    This not same dell as yours but who knows it may well work for you.


    Regarding the Dell A940 "Error 50c"....the user guide doesn't seem to mention "Error 50c". They do, however, mention a "Cartridge Error" on page 52 of the manual. They claim this means that the printer has detected a short circuit (fuse/resister) in the cartridge. As you may or may not have noticed in the manual, this is what they recommend doing about it:

    1) Press Power to turn the printer off.

    2) Lift the printer cover/lid (scanner unit) until the scanner support holds it open.

    3) Turn the printer on.
    The ink cartridge carrier moves and stops at the loading position unless the printer is busy.

    4) Remove the color ink cartridge.

    5) Lower the printer (scanner unit) until it is completely closed.
    If the error message displays again, replace the black cartridge with a new black cartridge.

    If the error message does not display, repeat steps 1–3 and then go to step 6.

    6) Reinstall the color cartridge and remove the black ink cartridge.

    7) Lower the printer (scanner unit) until it is completely closed.

    If the error message displays again, replace the color cartridge with a new
    color cartridge.
    If there is no error message (indicated by flashing lights), repeat steps 1–3 and then reinstall both ink cartridges.
    8) Lower the printer (scanner unit) until it is completely closed.

    If you get the error message again, while both cartridges are installed, replace both of the cartridges.

    Basically, what they want you to determine is,....if the short circuit is with the "black ink" cartridge or the "color ink" cartridge and then replace the cartridge that has the problem.

    You may have to buy a new cartrige.
    Please all I ask is call back and just gave a vote, it will gave me some satisfaction to know am helping some one, so I will keep on helping.
    All The Best: Pineworks

    Jan 04, 2010 | Lexmark X5150 All-In-One InkJet Printer

    1 Answer

    Error 50c


    Hi there Error 50c
    Gave it a go it may work for yours.
    Regarding the Dell A940 "Error 50c"....the user guide doesn't seem to mention "Error 50c". They do, however, mention a "Cartridge Error" on page 52 of the manual. They claim this means that the printer has detected a short circuit (fuse/resister) in the cartridge. As you may or may not have noticed in the manual, this is what they recommend doing about it:

    1) Press Power to turn the printer off.

    2) Lift the printer cover/lid (scanner unit) until the scanner support holds it open.

    3) Turn the printer on.
    The ink cartridge carrier moves and stops at the loading position unless the printer is busy.

    4) Remove the color ink cartridge.

    5) Lower the printer (scanner unit) until it is completely closed.
    If the error message displays again, replace the black cartridge with a new black cartridge.

    If the error message does not display, repeat steps 1–3 and then go to step 6.

    6) Reinstall the color cartridge and remove the black ink cartridge.

    7) Lower the printer (scanner unit) until it is completely closed.

    If the error message displays again, replace the color cartridge with a new
    color cartridge.
    If there is no error message (indicated by flashing lights), repeat steps 1–3 and then reinstall both ink cartridges.
    8) Lower the printer (scanner unit) until it is completely closed.

    If you get the error message again, while both cartridges are installed, replace both of the cartridges.

    Basically, what they want you to determine is,....if the short circuit is with the "black ink" cartridge or the "color ink" cartridge and then replace the cartridge that has the problem.

    You may have to buy a new cartrige.
    Please all I ask is call back and just gave a vote, it will gave me some satisfaction to know am helping some one, so I will keep on helping.
    All The Best: Pineworks

    Dec 27, 2009 | Lexmark X5150 All-In-One InkJet Printer

    1 Answer

    Cartridge Error 50C consult user guide. I


    Error messages; Error: "Cartridge Error 50C"; Cartridge error; Black cartridge missing; Color cartridge missing Solution Cartridge Error 50C
    Your print cartridge has shorted.

    1. Power off your All-in-One and unplug it.
    2. Plug in your All-in-One again and turn it on.
    3. Uninstall and then reinstall your cartridges.
    4. If this does not resolve the issue, try the troubleshooting steps for the other cartridge errors below.

    Error: Black Cartridge Missing
    The black cartridge is not installed. (Install cartridge PN 82)
    Error: Color Cartridge Missing
    The color cartridge is not installed (Install cartridge PN 83)
    Cartridge Error
    Complete the following instructions:

    1. Power off your All-in-One.
    2. Use both hands to lift up the scanner unit until the scanner support holds it open.
    3. Turn the All-in-One on. The print cartridge carrier moves and stops at the loading position, unless the All-in-One is busy.
    4. Remove the color print cartridge.
    5. Lower the scanner unit until it is completely closed.
    6. If the error message reappears, replace the black print cartridge with a new print cartridge.
      If it does not repeat steps 1-3 and then go to step 7.
    7. Reinstall the color cartridge and remove the black print cartridge.
    8. Lower the scanner unit until it is completely closed.
    9. If the error message occurs again, replace the color cartridge.
    10. If an error message reappears, repeat steps 1-3 and reinstall both print cartridges.
    11. Lower the scanner unit until it is completely closed.
    12. If you receive the error message again, replace both cartridges.

    Nov 10, 2009 | Lexmark X6170 All-In-One InkJet Printer

    1 Answer

    Cartride error 50c on display


    Hi there Error 50c
    ok ok try see if this works
    Regarding the Dell A940 "Error 50c"....the user guide doesn't seem to mention "Error 50c". They do, however, mention a "Cartridge Error" on page 52 of the manual. They claim this means that the printer has detected a short circuit (fuse/resister) in the cartridge. As you may or may not have noticed in the manual, this is what they recommend doing about it:

    1) Press Power to turn the printer off.

    2) Lift the printer cover/lid (scanner unit) until the scanner support holds it open.

    3) Turn the printer on.
    The ink cartridge carrier moves and stops at the loading position unless the printer is busy.

    4) Remove the color ink cartridge.

    5) Lower the printer (scanner unit) until it is completely closed.
    If the error message displays again, replace the black cartridge with a new black cartridge.

    If the error message does not display, repeat steps 1–3 and then go to step 6.

    6) Reinstall the color cartridge and remove the black ink cartridge.

    7) Lower the printer (scanner unit) until it is completely closed.

    If the error message displays again, replace the color cartridge with a new
    color cartridge.
    If there is no error message (indicated by flashing lights), repeat steps 1–3 and then reinstall both ink cartridges.
    8) Lower the printer (scanner unit) until it is completely closed.

    If you get the error message again, while both cartridges are installed, replace both of the cartridges.

    Basically, what they want you to determine is,....if the short circuit is with the "black ink" cartridge or the "color ink" cartridge and then replace the cartridge that has the problem.

    You may have to buy a new cartrige.
    Please all I ask is call back and just gave a vote, it will gave me some satisfaction to know am helping some one, so I will keep on helping.
    All The Best: Pineworks

    Oct 31, 2009 | Dell A960 All-In-One InkJet Printer

    1 Answer

    Error 50c, recieving this error when trying to print or make a copy


    Hi there Error 50c


    It works for the 940 it may work for the 960 too.
    Regarding the Dell A940 "Error 50c"....the user guide doesn't seem to mention "Error 50c". They do, however, mention a "Cartridge Error" on page 52 of the manual. They claim this means that the printer has detected a short circuit (fuse/resister) in the cartridge. As you may or may not have noticed in the manual, this is what they recommend doing about it:

    1) Press Power to turn the printer off.

    2) Lift the printer cover/lid (scanner unit) until the scanner support holds it open.

    3) Turn the printer on.
    The ink cartridge carrier moves and stops at the loading position unless the printer is busy.

    4) Remove the color ink cartridge.

    5) Lower the printer (scanner unit) until it is completely closed.
    If the error message displays again, replace the black cartridge with a new black cartridge.

    If the error message does not display, repeat steps 1–3 and then go to step 6.

    6) Reinstall the color cartridge and remove the black ink cartridge.

    7) Lower the printer (scanner unit) until it is completely closed.

    If the error message displays again, replace the color cartridge with a new
    color cartridge.
    If there is no error message (indicated by flashing lights), repeat steps 1–3 and then reinstall both ink cartridges.
    8) Lower the printer (scanner unit) until it is completely closed.

    If you get the error message again, while both cartridges are installed, replace both of the cartridges.

    Basically, what they want you to determine is,....if the short circuit is with the "black ink" cartridge or the "color ink" cartridge and then replace the cartridge that has the problem.

    You may have to buy a new cartrige.
    Please all I ask is call back and just gave a vote, it will gave me some satisfaction to know am helping some one, so I will keep on helping.
    All The Best: Pineworks

    Oct 07, 2009 | Dell A960 All-In-One InkJet Printer

    1 Answer

    Error 50 c


    1. Power off your printer.
    2. Use both hands to lift up the scanner unit until the scanner support holds it open.
    3. Turn the printer on. The print cartridge carrier moves and stops at the loading position, unless the printer is busy.
    4. Remove the color print cartridge.
    5. Lower the scanner unit until it is completely closed.
    6. If the error message reappears, replace the black print cartridge with a new print cartridge.
      If it does not repeat steps 1-3 and then go to step 7.
    7. Reinstall the color cartridge and remove the black print cartridge.
    8. Lower the scanner unit until it is completely closed.
    9. If the error message occurs again, replace the color cartridge.
    10. If an error message reappears, repeat steps 1-3 and reinstall both print cartridges.
    Hope this helps.
    1. Lower the scanner unit until it is completely closed.
    2. If you receive the error message again, replace both cartridges.

    Jul 29, 2009 | Lexmark X6170 All-In-One InkJet Printer

    1 Answer

    Dell printer model# A940 50c error


    Test your cartridges.

    Remove the color ink cartridge then lower the cover of your printer. If the error message displays again, replace the black cartridge with a new one (or return the new one). Reinstall the color cartridge and remove the black ink cartridge then lower the cover. If the error message displays again, replace the color cartridge with a new color cartridge.
    Note: My manual indicated that the printer might have detected a short circuit in a cartridge. I returned a month old black cartridge got a new one and my printer is working fine now. Good luck.

    Nov 10, 2008 | Dell A940 All-In-One InkJet Printer

    Not finding what you are looking for?
    Lexmark X4650 InkJet Printer Logo

    Related Topics:

    97 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Lexmark Office Equipment & Supplies Experts

    Clive
    Clive

    Level 3 Expert

    4345 Answers

    Ekse

    Level 3 Expert

    13434 Answers

    Thomas F. Schneider

    Level 3 Expert

    2715 Answers

    Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...