Question about ViewSonic Computers & Internet

1 Answer

Will power on but is not receiving picture from MAC, it says,"No signal, digital," and then the light goes orange from blue. Do you think it's the connecting cord?

Model: ViewSonic VG2230wm

Posted by Anonymous on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 62 Answers

Make sure the MAC is sending a valid timing mode that conforms to industry timing standards or VESA standards.

Posted on Feb 08, 2015

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 116 Answers

SOURCE: Monitor has no picture

Yes! :)

Your monitor is not the problem. Check all the connections from the back of the monitor, to the computer.

"No Signal Analog" means your monitor is working perfectly, however is not receiving signal from the computer.

Didnt find any loose cables?
Try unplugging everything. Leave it unplugged for at least 5 minutes. You need to give the system time to drain all the excess power.

Again your monitor is fine, blue light > No signal > orange light is totally normal for your montior.

Posted on Oct 13, 2007

Anonymous

SOURCE: Viewsonic VA1912wb power goes off

xZAxZC

Posted on Sep 03, 2008

pudster11

  • 12 Answers

SOURCE: vg2230wm monitor Will not power on

probably your power supply. Is it a cord direct from plug in for is there a box between where you plug it in and then a small round end that goes into the monitor. This would be the good news. If it plugs in direct then that means the power sopply is in the monitor itself which means more expensive to fix

Posted on Aug 05, 2009

gripfitter

gripfitter

  • 557 Answers

SOURCE: ViewSonic VX2235WM turns on than screen goes blank

The problem is most likely the monitor itself. Hook up an old monitor (usually someone has an old monitor laying around) if the computer works with another monitor you'll know for sure.
Look at your monitor using a flash light at an angle, if you can see a picture in the background you have a bad inverter.

Posted on Nov 28, 2009

budmrtn

Bud Martin

  • 11361 Answers

SOURCE: Viewsonic VG2230wm 22 Blank screen

Look for bad caps in the power supply first, see example of failed VIEWSONIC monitors due to bad caps here: http://s807.photobucket.com/home/budm/allalbums
Post back what you see so we can guide you furhter.

Posted on Feb 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dish network Blue screen No "Signal


Hi john harrison!

A blue screen with "No Signal" is usually related to a video problem. The TV may be getting changed off the correct input/channel, or the video cable might be going bad.

If you have a spare, I would recommend a different cable and seeing if that fixes the problem. If it continues, verify the input/channel your TV is on when it receives a picture and if it goes out try putting it back on that input/channel.

If problems still continue I would be happy to review additional options with you. You can reach me here or at thomas.faust@dish.com

Tommy Faust
DISH Social Media Representative

Jun 03, 2012 | DISH Network Televison & Video

1 Answer

Free pioneer DEH-5 wiring guide


Here ya go...

Power and Accessory Wiring:

Red = 12v Switched Source (Ignition)
Yellow = 12v Constant Source (Battery)
Black = Ground (Chassis)
Orange = Illumination (Dashboard Lights)
Blue with White = Power Antenna Up / Down Signal
Blue = Amplifier Power On / Off Signal


Speaker Wiring:

White / White & Black = Left Front speaker + / -
Green /Green & Black = Left Rear speaker + / -
Gray / Gray & Black = Right Front speaker + / -
Violet / Violet & Black = Right Rear speaker + / -

Oct 05, 2011 | Car Audio & Video

1 Answer

How do i wire red white and yellow rca to an xbox 1 av plug. my av plug has blaack white orange and green wires


In the old school standard AV: Red and White are usually audio channels (Red:Right - White:Left), Yellow is video.

Orange can be coax audio, (both L&R channels in one cable). Before digital (optical) came out, some receivers actually had a coax (orange) jack in the back. Radio Shack sells a splitter if necessary.

In higher resolution systems video is separated into three colored cables: RGB or Red, Green, Blue
called 'component' video. The green cable carries Yellow, the blue cable carries (PB) Blue and the red cable carries Red (PR). And with today's tech, the component signal is carried YCBCR as (digital video.) cf. http://en.wikipedia.org/wiki/YPbPr

Component 'wire colors' are there just to remind us. If your TV has "Component" input. Try green to green, white to yellow and black to red. Orange to audio (splitting L&R if necessary)..

Also, here is a PS3 link that might help: http://www.ps3hax.net/showthread.php?t=9238
Good luck !

Apr 23, 2011 | Video Game Consoles & Games

1 Answer

I'm putting panasonic cq-c1103u player into 2001 corolla using an adapter plug. I have all the wires connected from plug to player harness, but the is 2 wires left over from the plug, the blue power antena...


unless you have a power antenna or an external amp, all those are extra wires. just cap them off. the orange wire is only used if the radio has an illumination feature that allows dimming on the radio. it is not needed to see the radio. DO NOT connect the blue/white from the radio to the orange of the harness. whenever you turn the radio on it will send 12V to your cars illumination circuit. this could damage your lights, dash lights and maybe the radios output.

Apr 12, 2011 | Panasonic CQ-C1103U CD Player

3 Answers

Need wiring diagram for a Pioneer stereo model AVIC-D3


Yellow - Battery
Red - Ignition
Black - Ground
Light Green - E-brake
Purples, greens, whites, and grays - speakers
Purple\white - reverse signal
Blue\white or Blue - amp turn on\ power antenna
Yellow\black - mute wire
Orange or Orange\white - illumination

Sep 03, 2010 | Pioneer AVIC-D3 Car DVD Player

1 Answer

Vizio tv orange light on, not blue, won't bring up picture


if orange it is on stand by mode ,the cable that you changed is it power cable if yes then you used wrong one it may affect, i think you need to check power supply board . also get other opinion too. good luck

Apr 29, 2010 | Vizio L32 32 in. LCD HDTV

1 Answer

Putting in a alpine deck into my cirrus


Constant 12V+ Pink/Yellow Switched 12V+ Red/White Ground Ground/Back Strap Illumination Orange/Brown Dimmer Black/Light Blue Antenna Trigger Orange/Red Antenna Right Rear Front Speakers 6 1/2" Doors Left Front (+) Light Green/Green Left Front (-) Light Green/Purple Right Front (+) Light Blue/Green Right Front (-) Light Blue/Purple Rear Speakers 6" x 9" Rear Deck Left Rear (+) Brown/Yellow Left Rear (-) Blue/Light Blue Right Rear (+) Dark Blue/White Right Rear (-)

Dark Blue/Orange

Mar 28, 2009 | Alpine CDA-9847 CD Player

4 Answers

1998 ford el xr6, need stereo wiring harness colours


You did not specify if you wanted the wiring diagram for the Expedition or the Explorer, so I got you both. Good Luck

1998 Ford Expedition Stereo Wiring
Constant 12V+ White/Purple Switched 12V+ Black/Pink Ground Black/Green Illumination Blue/Black Dimmer n/a Amplifier Remote Blue Antenna Right Front Front Speakers 6" x 8" Doors Left Front (+) Light Blue/White Left Front (-) Orange/Light Green Right Front (+) Dark Green/Orange Right Front (-) White/Light Green Rear Speakers 6" x 8" Rear Doors Left Rear (+) Tan/Yellow Left Rear (-) Gray/Light Blue Right Rear (+) Brown/Pink Right Rear (-) Orange/Red
1998 Ford Explorer Stereo Wiring Constant 12V+ Light Green Switched 12V+ Yellow/Black Ground Black Illumination Light Blue/Red Dimmer n/a Antenna Trigger Orange/Blue Antenna Right Front Front Speakers 5" x 7" Doors Left Front (+) Orange/Light Green Left Front (-) Light Blue/White Right Front (+) Dark Green/Orange Right Front (-) White/Light Green Rear Speakers 5" x 7" Rear Door Left Rear (+) Gray/Light Blue Left Rear (-) Tan/Yellow Right Rear (+) Orange/Red Right Rear (-) Brown/Pink

Feb 22, 2008 | Car Audio & Video

1 Answer

Monitor has no picture


Yes! :)

Your monitor is not the problem. Check all the connections from the back of the monitor, to the computer.

"No Signal Analog" means your monitor is working perfectly, however is not receiving signal from the computer.

Didnt find any loose cables?
Try unplugging everything. Leave it unplugged for at least 5 minutes. You need to give the system time to drain all the excess power.

Again your monitor is fine, blue light > No signal > orange light is totally normal for your montior.

Oct 12, 2007 | ViewSonic VX922 19" Monitor Flat Panel

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top ViewSonic Computers & Internet Experts

Ekse

Level 3 Expert

13434 Answers

Cindy Wells

Level 3 Expert

6063 Answers

Alun Cox

Level 3 Expert

2679 Answers

Are you a ViewSonic Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...