Question about Pioneer PureVision PDP-4300 43 in. Plasma Television

Open Question

I HAVE A PIONEER PLASMA DISPLAY MODEL PDP4300. WHEN I PLUG IT IN AND TURN ON THE BACK SWITCH, THE GREEN LIGHT COMES ON IN FRONT. IT STAYS ON UNTIL I PUSH THE STAND BY BUTTON ON. IT THEN BLINKS Green 3

I HAVE A PIONEER PLASMA DISPLAY MODEL PDP4300. WHEN I PLUG IT IN AND TURN ON THE BACK SWITCH, THE GREEN LIGHT COMES ON IN FRONT. IT STAYS ON UNTIL I PUSH THE STAND BY BUTTON ON. IT THEN BLINKS Green 3 TIMES PAUSES AND BLINKS 3 TIMES AND KEEPS REPEATING THE 3 BLINKS AND A PAUSE. DOES THIS TELL YOU ANYTHING ABOUT WHAT IS WRONG WITH IT?

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
eagle338

eagle338

  • 4889 Answers

SOURCE: I HAVE A PIONEER PLASMA

The 5 blinks error code means a faulty power supply. Pioneer has extended the warranty on certain models by 4 years(1+4 5 years in total). So if your tv is less than 5 years old contact pioneer for a free replacement power supply. They won't charge you for the part only for labor

Posted on Feb 16, 2011

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My tv won't turn on


Get the model # and serial # and brand go online to their support website like WWW.samsung/support.com and find the manual it will tell you the code.

Sep 21, 2014 | Televison & Video

1 Answer

What does a yellow wrench indicator light mean on a Pronto M41 w/Sure Step?


The yellow wrench is a diagnostic tool. How many times does it blink between pauses. Example might be 3 blinks then pause then 3 blinks then pause, over and over. Hoe many does your chair blink?

May 07, 2014 | Electric Mobility Pronto M41 Power Chair...

1 Answer

Kdl 32cx520 problum


Hi Jaswinder,
The led blinks continuously or it pauses after some blinks. If it pauses, can you tell me the number of times it blinks between two pause. Please quote the model number also.

Jan 17, 2014 | Televison & Video

1 Answer

Normal light flashes, unable to operate


Hello.

The reason the ligh keeps blinking is because it is displaying a error code. How many times in a row does the light flash before it pauses and blinks again?? the number of times it blinks in a row is the number of the error code its displaying...example if it blinks 7 times in a row before a brief pause its is displaying the E7 code and so on.

This tip i wrote will tell ya how to reset the control board but be sure to reply with the amount of times it blinks and i will let ya know whats its telling ya.

Here is that tip to reset it http://www1.fixya.com/support/r10357661-get_whirlpool_dishwasher_start_when


GENE

Sep 24, 2011 | Whirlpool GU2400XTP Built-in Dishwasher

1 Answer

Light flashes 7 times then pauses and blinks 7 times again, and keeps repeating


Temperature problem with water. Incoming water when filled should be no less then 1/2 inch below heater. If not, possible water valve. Incoming water temp. min after fill. 120 degrees. Missaligned door. One of door switches not activating. Bad circulation motor. Not throwing water over heater. Tech.sheet behind bottom panel. Will tell you. Shorted heater. When bottom panel is removed. Look for signs of water leaks. Hard water deposits on floor.

Mar 28, 2011 | Kenmore 24 in. 17032 Built-in Dishwasher

2 Answers

Quickie s-525 joystick lights blink chair does not drive. what is the problem and its solution.


I need to know how many blinks you are getting ie 4 blinks pause 4 blinks pause etc. If you can count the number of blinks between pauses then we can figure out what the error is. Hope this helps

Feb 15, 2011 | Quickie Wheelchairs Auto Sunrise Med...

2 Answers

I have a toshiba 42HL167. Love it but recently when the power is off iget a repeating blinking yellow light. Blinks 3 times pauses blinks 3 time pauses blinks either 2 or 3 times then stops for 25 seconds...


Yes. The Yellow LED blinking 3 times is a normal boot-up, but if it keeps doing it -- it needs the firmware "update" (which is more like a reload because it got corrupted.) The problem is, no one talks about how to do that. (there is a PDF and firmware on toshiba's website, but it lacks some crucial details.)

My friend gave me his 42HL167 after this problem started after a power event during a storm and I managed to fix it by reloading the firmware.

I posted instructions on my website at:

http://www.benjammin.net/www/pages/techtips/Toshiba-Regza-42HL167.html

Once I figured out some of the facts, it was a breeze...

Nov 06, 2009 | Toshiba 42HL167 42 in. LCD Television

1 Answer

Sony Rear projection TV


there should be a certain number of blinks then a slight pause then it will keep repeating that sequence of blinks. Let me know the model number of your sony and how many blinks it does in between pauses and I will help you with it. Please respond to this same post when replying.

Aug 26, 2008 | Televison & Video

Not finding what you are looking for?
Pioneer PureVision PDP-4300 43 in. Plasma Television Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76204 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Pioneer Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...