Question about Kenmore 62622 Microwave Oven

1 Answer

What does SE mean on Sears microwave oven

40185044210 model # Microwave does not work just shows SE

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Kenmore Master
  • 713 Answers

I believe that means you have a shorted keyboard. You will have to replace the keyboard/control console assembly.

If you need further help, reach me via phone at https://www.6ya.com/expert/ronald_e6b9572cebe3ad27

Posted on Jan 25, 2015

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
MicrowaveSvc

William Miller

  • 9179 Answers

SOURCE: Owners manual for Kenmore Elite Microwave Model 66462

A full Sears/Kenmore model number has 3 digits, a dot, then 8 more digits, such as ###.########

You can just enter your full model number at the Sears parts site.

On the resulting page, look to the right for the blue "View manuals" button. Click there.

d:%5cele%5crepair%5cmicrowave%5ckenmore_sears%5cview_manuals_button.jpgd:%5cele%5crepair%5cmicrowave%5ckenmore_sears%5cview_manuals_button.jpgd:%5cele%5crepair%5cmicrowave%5ckenmore_sears%5cview_manuals_button.jpgcaab351.jpg

That Sears-related site has many free manuals. While the manuals they list there are all free, they will ask you to register.

Many times, the owner's manual will have the installation instructions inside.

If yours is not listed there for free, you would have to order it through the
Sears parts site.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Posted on Jan 18, 2009

Anonymous

  • 998 Answers

SOURCE: Microwave Totally stopped - nothing turns on HELP Needed

check fuse

Posted on Aug 08, 2009

MicrowaveSvc

William Miller

  • 9179 Answers

SOURCE: kenmore microwave model number 401.80084700 Displaying -SE-/-5E-

-SE- error means you have a shorted membrane keypad.

So until it is repaired, please leave it unplugged or leave the door open when it's not in use, and of course one should never leave a microwave unattended while cooking.

There are three ways you can get it fixed:

DE34-00178X SWITCH MEMBRANE $20.30
ref#53 membrane keypad
take yours off as in the video at our site, peel the old keypad off as in this handy guide with pictures , clean the surface, stick on the new keypad
order by part number here
(We can do this job for you for a total of $70.25, but as you can see, the other two options are more practical and economical)

DE94-01647A ASY CONTROL PANEL $39.01
ref#66 control panel frame with keypad
take yours off as in the video at our site, disconnect the keypad strip as shown here, move your circuit board to the new frame, reinstall
order by part number here

DE94-01648A ASY CONTROL, BOX $58.12
ref#59 complete control panel assembly with frame, keypad and circuit board
take yours off as in the video at our site, then install the new one
order by part number here

If these parts are not in stock, they should be available in about a week or so.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Posted on Aug 09, 2009

Anonymous

  • 1 Answer

SOURCE: Kenmore Microwave Hood Combination oven Model Service code (SE) ?

I have Microwave Kenmore model 401.80082700 about more than a year. After about 6 months, it stated to have some probles such as some number keys not working. Then button START become nor working some times. I can use only button of 30 secon increment to cook something. OK, the fan is working for most of the time but the levels are stuck, not adjustable. I can't changer the fan levels. Now the lamp buton is dead. Sometime, the fan level control is working by itself level 1, 2, 3.... then it appears -SE- on the display. nothing work now. I unplug.... then plug back, it ask to input the time or date... I can't do any thing. Later some time I can cook by using 30 secon button.... It is anoying. Please how I can fix it? Thank you.

Posted on Nov 09, 2009

Kolawole Ayede

  • 327 Answers

SOURCE: 66993 pizza oven microwave oven combo

Hello, please use the chart to determine which stove you have. You will have to look at the model number. The first 3 numbers will be the series on the chart. In most cases an F1 error would require replacement of the electronic control. This part is commonly refered to as an EOC or ERC. However this type of repair is usually reserved for repair specialists.

KENMORE Range/Stove/Oven Fault Codes – 362 Series (General Electric)
F1 = Stuck Touch Pad Key - Replace Electronic Range Control (ERC).

KENMORE - 911 Series (General Electric/Roper)
F0-F1-FF = Failed transistor in Electronic Range Control (ERC).

KENMORE Range/Stove/Oven Fault Codes- 665 Series (Whirlpool)
F1-E0 EPROM Error - Electronic Range Control (ERC).
F1-E1 EPROM Error - Electronic Range Control (ERC).
F1-E2 U/L ERC Errors - Electronic Range Control (ERC).
F1-E3 Fuel Type Fail

Kill power 30 seconds-Cancel-Start/Enter-5 seconds-Should see “E” for electric-
“9” for gas-If code changes again-replace Electronic Range Control (ERC).

KENMORE - 790 Series Electronic Oven Control (Frigidaire)
F1 = Shorted Touch Pad = Electronic Range Control (EOC) Internal check sum error.
Runaway Temp = Replace Electronic Oven Control (EOC).

Kill power 30 seconds - if error returns - replace Electronic Oven Control (EOC).

Thanks

Posted on Jul 13, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Maytag model MMV4203 display shows SE


same thing as Samsung - shorted key - google manual

Feb 01, 2016 | Maytag MMV4203D Microwave Oven

1 Answer

SAMSUNG MICROWAVE SHOWS SE AND WILL NOT WORK.WHY?


SE is an error code for a shorted keypad, although the keypad might not really be shorted.

Unplug the oven for a few minutes to see if it clears the error code. If not, then leave it unplugged over night. If the problem persists, then you probably do have a shorted membrane switch on the keypad.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/david_29ad5d1dd86564b0

Aug 29, 2014 | Samsung SMH9187ST Microwave Oven

1 Answer

Display shows "=SE-", and do nothing


"SE" means = sensor error, try to dry it out with a hair dryer, if not working, you have to replace the sensor

Jul 29, 2012 | Samsung SMH9151 Microwave Oven

1 Answer

My SMH9151W Samsung Microwave displays a -SE- or a -5E- and will not operate. I unplugged over night and still will not operate


I had the same issue on a 2010 smh9151w samsung microwave after installing it and using it with no problem for 5 days. The second time we unplugged the microwave and turned the circuit breaker off and on we didn't reset the clock on the microwave so the display shows :0 and it has been working for 7 days straight now. Fingers crossed that this is a long term solution. Hope this helps. Thanks!

Mar 20, 2012 | Samsung Microwave Ovens

1 Answer

Microwave model UMC5200BAB display is locked. After power reset per instructions display shows error code -SE- or -5E-. Somtimes pressing Stop for few seconds bring the clock back and it work fine for a...


"SE" error means you have a shorted membrane keypad.

If you (or someone you know) might want to replace it yourself, I have uploaded a handy guide with pictures showing you what's typically involved.

You can find helpful exploded view diagrams and order parts by entering your full model number here.

If you would like to have us do this repair for you, we do that for $39.95 plus part costs

Oct 08, 2010 | Microwave Ovens

1 Answer

Fan not working on microwave model smh915


Samsung SMH9151W microwave display shows "-SE-", after power on. Nothing else working. Any idea? Thanks a lot

Aug 03, 2010 | Samsung Microwave Ovens

1 Answer

Samsung Microwave Oven shows -SE- on the display. Why?


-SE- error means you have a shorting membrane keypad.

Since it's less than one year old, it would be fully covered under warranty. I'd suggest contacting the manufacturer to get it fixed free.

You can find your nearest Samsung-authorized service center here or call Samsung's Service Division at 800-932-3837.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Jun 14, 2009 | Samsung Microwave Ovens

Not finding what you are looking for?
Kenmore 62622 Microwave Oven Logo

Related Topics:

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

9179 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Cindy Wells

Level 3 Expert

6049 Answers

Are you a Kenmore Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...