Question about Samsung TV Remote Control

1 Answer

Samsung LN46B530P7f. Tv not respond to remote or channel volume buttons tv changing channels and volume on its own

Removed back look for burns or damage

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • Samsung Master
  • 76,204 Answers

Check the remote control for its infra-red emission. Check it with fresh batteries. Check by pressing all the buttons on it; and see whether all of it generates infrared signal while pressing. If it is found OK, check and replace the infrared sensor inside the TV. If you wish to get some details; check the site linked here. It has details about how to check a remote control; by one among the post. Surf the site with patience. Pull up older posts. If the remote control is found OK; check and replace the infra-red sensor inside the TV. Contact any service technician.

Posted on Dec 02, 2014


6 Suggested Answers


6ya staff

  • 2 Answers


Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017



SOURCE: samsung remotes

is there a text center

Posted on Aug 24, 2008


  • 1 Answer

SOURCE: remote won't work

Hi I had the same problem last night, so I took the batterys out  and left it for a Day, have just put them back and its working for the moment, hope that it keeps on working !!! good luck with yours.

Posted on Feb 20, 2009


bernard lunda

  • 318 Answers

SOURCE: My samsung tv is not responding to my remote control

your turning section is not responding to any input, hence needs to be checked by a technician. every thing you have mentioned are controlled by one ic, with its respective voltages.

Posted on Mar 27, 2009


andy williard

  • 226 Answers

SOURCE: Remote control has stopped working.

your remote needs to be put back in TV mode. press the tv button or slide the switch to tv

Posted on Apr 28, 2009


  • 5 Answers

SOURCE: remote will not turn tv on and off

this is not the original remote for this product it is a cheaper version

Posted on Jun 22, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Jigsaw heating up and losing power.

Motor is heating up because too much power is entering the unit. That will happen when the motor is NOT spinning at correct speed. This can be accounted for by using it for a job it was not untended for or excessive friction in the motor bearings.

You may have already permanently damaged the windings where on some of them the plastic insulation has melted and the wires now touch each other resulting in a lower than normal resistance, more current consumption and less back emf.

Unless that motor is binding, I believe you have damaged the motor - cannot be fixed but only replaced. Sorry.

Feb 25, 2016 | Dryers

1 Answer

Samsung microwave is burning food.

contact with service center . unit may damage your property or home.

Apr 29, 2014 | Samsung 80092 Microwave Oven

1 Answer

Externally test motherboard

when it's broke i think u should buy a new notebook. unlike PC, notebook mobo aren't sold individually.

Feb 28, 2010 | Acer Computers & Internet

1 Answer

When the machine is switched on there is a smell of burning / hot plastic. i have removed the front cover and there is no sign of any heat damage to the controls or PCB. The wachine works fine, except for...

Have got the same problem at the moment. Removed all the covers and checked the control panel ( no damage, no smell ) The drain motor ( no damage, no smell ) and the drum motor again no obvious problems. Checked the brushes on motor and they were fine also. Have decided to let whatever it is run itself to destruction and then hopefully i can identify it.
Will post on here if i can resolve.

Feb 25, 2010 | Bosch Classixx WFC 2465 Front Load Washer

1 Answer

Damaged Games

Check to see if there are any scratches or laser burn marks on the discs. Scratches or marks on discs will render game discs unplayable or will freeze the game and will often show a message stating “Disc Read Error” or something to that effect. Best remedy for starters, is to clean the discs and make sure there are no scratches or marks left on the play-side of the discs. A common problem that Xbox owners are reporting is if the console is moved during play, a whirring noise is heard and then when the disc is removed, very visible laser burn rings are found on the disc.
Laser burn, looks like complete or partial circular scratches around your disc, also known as “the ring of death”. This occurs to discs when the games console has been moved whilst playing, from an upright to a horizontal position or vice versa or simply knocked against or the wires may have been just tripped upon. Discs are then impaired by a ring of laser burn, which is a circular scratch into the disc. Some home remedies may help with very light scratches on some discs but professional disc repair services is normally required to restore disc laser burn damage back to "As Good As New Condition".

For further help on Xbox & Xbox 360 disc repairs, visit:

Check the “More Info” & “FAQ” Sections for further details on disc repairs and related matters.

If this laser burn scenario is consistently happening to your game discs especially if the console has not been moved or bumped against while the discs is in play, the games console itself may require repair.
You should contact Microsoft for assessment and guidelines.

Hope this Helps!!

Feb 04, 2010 | Microsoft Xbox Console

1 Answer

Microwave blown fuse 5kv 0.75A needs replacing !!!SAFELY!!!

yes you can but it will eventually burn again and this time causing bigger damage

Oct 25, 2009 | Maytag MMC5000 Microwave Oven

3 Answers

My hitachi 50VS69A tv shows the picture green.

A green image is usually due to a lack of red or especially blue. the problem is becoming all too common with hitachi lcd projection sets. what happens is that one of the lenses in the optical block (or light engine) starts to burn or discolor due to overheating because of a blocked air filter causing poor air (cooling) circulation. Nothing can be done when the damage is too far gone except to replace the light engine-at acost that makes it not worth repair. if the damage is minimal than to reduce further damage the air filter should be replaced. Light engine needsto be removed in order to replace the air filter.

Sep 04, 2009 | Hitachi 50VS69 50" Projection HDTV

1 Answer

GE Front Loading Washer - Pump/drain issue

yep you will have to take it out and look at it. either something is still in it or the brushes are damaged and burned up/stuck
at least its easy to get to without taking the front off.
as the pump is hot it may be working and just be stuck.

Jun 01, 2008 | GE WBVH6240F Front Load Washer

Not finding what you are looking for?
Samsung TV Remote Control Logo

165 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76204 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1691 Answers


Level 3 Expert

13434 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides