Question about Pride Mobility Products Hurricane PMV 4-Wheel w/55AH Batteries & Charger + Flat Free Tires - Color Viper Blue - Gray Fabric Seat

1 Answer

Speed control on Pride Hurricane

Can not get speed control to get out of low speed (1 bar on indicater. Was OK , recently moved.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Pride Mobili... Master
  • 1,412 Answers

Hi, the speed control could be faulty, see if you can spray some Wd40 or contact cleaner in the gap and see if that improves things...is it the one with the snail , rabbit speed sign ?

one bar on the indicator does imply low battery power ...is it flashing ? if it is then that's a fault condition

Regards
Rob

www.gewizrepairs.co.uk

Posted on Dec 23, 2014

Ad

2 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
HoverTech

Donna Angelo

  • 232 Answers

SOURCE: My Pride Hurricane PMV will not go forward or

Make sure that the manual brake release/freewheel lever is in the DRIVE position. The click indicates the brakes are being released but the motors are not kicking in. I hope this helps- good luck!

Posted on Nov 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Stopped going when free wheel lever accidently pushed forward. Put back. Still wont start.


Check for error codes. Move free wheel lever in and out a few times in case the brake micro switch is not making correctly.
Check speed control is not turned down low.

Mar 21, 2015 | Pride Celebrity X 3 Wheel Scooter

1 Answer

Shoud light red light flash behind charge indicater when switched on on hurricane


hi, is this still a issue, this is a fault ....

Regards
Rob

www.gewizrepairs.co.uk

Mar 12, 2015 | Pride Hurricane 4 Wheel Personal Mobility...

1 Answer

Where can i get brushes for pride hurricane in uk


I would contact pride or a service centre as if you put the wrong grade of brush in the motor you can damage the comm and motor.

The motors are not cheap.

Mar 03, 2015 | Pride Mobility Products Hurricane PMV...

1 Answer

Why does my tss300 power indicater keeps flashing left to right but won't move?. Batteries are fully charged and breaker reset is set.


hi, first of all make sure the motors are engaged , move the drive levers a couple of times, check the connection form the motors to the controller..

Please let me know how you get on :)

Regards
Rob

www.gewizrepairs.co.uk

Apr 27, 2014 | Pride Mobility Pride TSS300 Power Chair -...

1 Answer

Pride hurricane, pre 2004, when throttle is released at any speed, the mag brake activates immediately instead of allowing the scooter to slow naturally, then applying the brake. all appears to be ok, is...


Things to check : Condition of the brake actuator and the condition of the brake shoes. If there are no flashing lights indicating a problem with the controller, then I would think it's all mechanical.

Sep 12, 2013 | Pride New Mobility Victory XL 4 Wheel...

1 Answer

No forward, only backward


Hi. If the light flashes 7 times, it has a speed controll fault. It might be the throttle lever ( wig wag ), or it might be the speed pot that controls your top speed.
Try moving the throttle lever ends up and down while you are driving the machine. Doing this wont fix it, but it will highlight the problem, if the throttle lever is faulty. Also try moving the speed pot back and forward a few times.
Good luck. Neil.

Jul 17, 2010 | Pride Mobility Products Hurricane PMV...

1 Answer

SCOOTER WON,T MOVE OR MOVES ERRATIC LED INDACATES SPEED POT AT FAULT


hi, ok that's sounds about right, the speed pot hat is attached to the throttle lever is normally about 5K in value.

Feb 14, 2010 | Hurricane Pride PMV Mobility Scooter -...

2 Answers

Shoprider scooter what it does is that runs for about 1hr. or 11/2 and make a sudden stop and started beeping and it doesn't move. I turn off the key and wait for about 1 min. and turn on the key and start...


i have the same problem with my pride hurricane ,
i am looking into the throttle potentiometer to see if that is the
problem,
i will post on here if i find out,
let me know how you get on !

Nov 02, 2009 | Shoprider Sprinter Jumbo 3

1 Answer

Hogh - low speed switch is incorrectly wired , but i dont know how it should be wired - Pride Hurricane scooter




Hi, I take it been taken then, do you get a error codes ?

see below


DIAGNOSTIC FLASH CODES
The diagnostic flash codes for your scooter are designed to help you perform basic troubleshooting quickly and
easily. A diagnostic flash code will flash from the status LED in the event one of the conditions listed below
develops.
NOTE: Your scooter will not run unless the flash code condition is resolved and the scooter has been
turned off, then turned back on.
Any electromechanical device occasionally requires some troubleshooting. However, most of the problems that
may arise can usually be solved with a bit of thought and common sense. Many of these problems occur because
the batteries are not fully charged or because the batteries are worn down and can no longer hold a charge.
FLASH CODE CONDITION SOLUTION
! (1) Battery charge is low. Charge batteries as soon as possible.
! ! (2)
Batteries are too low to operate the
scooter.
Charge batteries.
! ! ! (3)
The scooter’s battery voltage is too
high to operate the scooter, or the
charger is still connected to charger
port.
Unplug charger and/or turn key off, then
back on again.
! ! ! ! (4) Current limit time out.
Turn the scooter off for a few minutes,
then turn your scooter back on.
! ! ! ! ! (5)
The manual freewheel lever is in the
(forward) freewheel position.
Remove the key from the key switch,
then push the manual freewheel lever to
the (rear) drive position, and restart your
scooter.
! ! ! ! ! ! (6)
Throttle control lever not at center
position at start up.
Return the throttle control lever to center
position, turn scooter off, then back on.
! ! ! ! ! ! ! (7) Speed pot error.
Contact your authorised Pride Dealer for
assistance.
! ! ! ! ! ! ! ! (8) Motor volts error.
Contact your authorised Pride Dealer for
assistance.
! ! ! ! ! ! ! ! ! (9) Other internal errors.
Contact your authorised Pride Dealer for


Regards
GeWiz.

Oct 20, 2009 | Pride Hurricane 4 Wheel Personal Mobility...

Not finding what you are looking for?
Pride Mobility Products Hurricane PMV 4-Wheel w/55AH Batteries & Charger + Flat Free Tires - Color Viper Blue - Gray Fabric Seat Logo

161 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pride Mobility Products Health & Beauty Experts

Rob Hill
Rob Hill

Level 3 Expert

1412 Answers

Will

Level 1 Expert

25 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Are you a Pride Mobility Products Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...