Question about Dishwashers

1 Answer

Hi my kleenmaid silent system think it's a dw2 the salt button is flashing you turn it on it goes to start then stops we cleaned it all out and fix the problem once before but this time nothing works. I'm in Australia there's no actual dshwsher salt to buy so I bought a similar product put it in the salt dispenser up the back but still won't work please help I've been without a dishwasher for months!

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dishwashers Master
  • 3,247 Answers

If water is soft in your area you can ignore the salt indicator light and operate the dishwasher without adding regenerating salt. However, you need to ensure the salt reservoir is filled with water to the brim. So add water into the reservoir and then put the cap back on.

Posted on Dec 26, 2014

Ad

5 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 1 Answer

SOURCE: Need help with dishwasher

I misplaced my diagnostics paperwork, but I found you here and you saved my life!  The wife is much appretiative! 

 

~Teddy Bear

Posted on Oct 20, 2007

Anonymous

  • 2 Answers

SOURCE: Maytag dishwasher won't start

"unlock" the machine by pressing on '3' and holding for a few seconds. Thats what it says on the back of my dishwasher which is the exact same model.

Posted on Oct 28, 2008

Anonymous

  • 1 Answer

SOURCE: Clean light on dishwasher won't stop flashing

yust reset press heated dry-normal-heated dry normal-and it will work 100% remember that code it is reset code for wirpool quiet partner and many other models

Posted on Feb 19, 2009

Anonymous

  • 1 Answer

SOURCE: Hotpoint Aquarius SDW60 Dishwasher

i have had this dishwasher sdw60 for 18 months and it just keeps beeping, i have cleaned it ,turned it off at the mains it just dont wont to work. please help.

Posted on Feb 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Bosch dishwasher model # shx4ap05uc/06 and I want to silence the alarm for when it is done. It goes off every 10 minutes until you open the door


Hi,

Yes, you can switch the cycle completion signal off (or raise/lower the volume)

1. Switch the dishwasher off using the ON/OFF button
2. Open the door
3. Switch the dishwasher on again. (One of the wash cycle LEDs will flash.)
4. Hold the > button in. Continue holding it and press and release the Start/Reset button once, then release the > button.

"Clean" and one other LED should now be flashing. This indicates that the dishwasher is in the options/settings mode. If they are not flashing, start over at step 1.

5. Press > repeatedly, until the LEDs for "Clean", "Sanitized" and "Rinse Agent" are all flashing.
6. Press repeatedly until none of the LEDs are flashing.

The number of flashing LEDs indicate the volume setting . . .

0 = Silent
1 = Volume level 1
2 = Volume level 2
3 = Volume level 3

7. Press the Start/Reset button once to save the setting and exit the options mode
8. Close the door
9. Switch the dishwasher off.

Hope this helps. Please let me know if you need further assistance.

Regards,
BElectric

May 27, 2011 | Bosch Dishwashers

1 Answer

Have Kleenmaid "Super silent system"


Dishwasher Doesn't Fill

1) First make sure the water is turned on. Check the hot-water supply stop valve, normally located under the sink. Open it all the way by turning it counterclockwise. If there is no reason this would have been turned off since the last time the dishwasher worked, go on to the next step.

2) Turn off the power to the dishwasher.

3) When the dishwasher is cool, look for the float inside the dishwasher; this is usually a small plastic dome or cylinder mounted inside at the tub's base, near the front. When you move most types of floats up and down, you can hear them click because they trip a lever (they are spring-loaded).

Lift out the float mechanism, and clean around the float tube. Many floats must be disconnected from below; to do this you'll have to remove the lower access panel. Rinse off the float, replace it in the tube, and make sure it moves up and down freely.

4) If you're experienced with minor repair work, shut off the hot-water valve to the appliance. Locate the water intake valve, behind the dishwasher's bottom front panel; disassemble the valve to reveal the screen; clean debris from the screen; and reassemble. If the screen doesn't appear to be blocked, call a repairperson (he or she will probably need to replace the water intake valve).

5) If none of this helps, call a repairperson. Any of several parts-including the water inlet valve, pressure switch, and the timer or selector switch-may be faulty.

Apr 09, 2011 | Fisher DD603B / DD603W / DD603H Dishwasher

2 Answers

Do you have a manual for the Kleenmaid DW20W dishwasher?


pushed on button. lights are on . Wont let me select settings . has 3hr delay light up . salt light on. pushed start button and nothing happens.

Dec 27, 2010 | Dishwashers

3 Answers

Ignis dishwasher beeps and flashes constantly


salt container is full of water

Mar 10, 2010 | Dishwashers

1 Answer

Salt water system flashes 90


Hi. Have you cleaned the flow sensor? Make sure that it moves freely throughout it's full range of motion. Sometimes things eventually will fail. If you have completed your checklist and the above mentioned then the replacement of the sensor unit seems to be the next logical step. Happy swimming

Aug 18, 2009 | Intex Automatic Salt Water System for ...

1 Answer

Salt System for Swimming Pool


http://www.inyopools.com/HowToPage/how-to-know-when-a-salt-cell-is-bad.aspx?CommentPage=1

Try this link. http://www.inyopools.com/HowToPage/how-to-know-when-a-salt-cell-is-bad.aspx?CommentPage=1

step 2 may be a clue that all that needs to be done (to turn out the light) is to depress the diagnostic button for about 3 seconds. Of course, some inspection or cleaning might still need to be done to preserve its life.

Thank you for your service. I haven't seen the name Blankenship since I left home in 58 to join the Navy.

May 17, 2017 | Water Heaters

1 Answer

L63 Salt light is flashing


goes for short time and 2 ljghts flash the red salt light wont go on

May 16, 2008 | Ariston Technologies L63 Free-Standing...

2 Answers

Sony KDP-65WS550 flashes when you try to turn it on


No the DLP units can flash more than 8 times. 9 blinks mean Zero Crossing detector which means diode number D6166 or D6114 is open they are on the A board.Let me know if you need any further info.

Feb 23, 2008 | Televison & Video

2 Answers

Bauknecht GSX4756 dishwasher


I have this problem frequetly - it's an easy one to fix! Just press the programme button which changes the programme setting you want (on my built-in GSX4756 it's the last button on the right) and keep it pressed in until the beeping stops. Then start it again (will probably be on the rinse programme if it's like mine).

Feb 08, 2007 | Bauknecht 24 in. GSFP3988 Built-in...

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

139 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dishwashers Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Brad Brown

Level 3 Expert

18121 Answers

Cindy Wells

Level 3 Expert

6048 Answers

Are you a Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...