Question about DISH Network Televison & Video

2 Answers

I am trying to get my dish network remote to work cant find remote code for my tv where is it ?

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 67 Answers

U can call Dish, or go on line and look for TV Codes for Dish Network.. Usually it will be one of the first three codes.. If u can't get the TV and Dish Remote to work try this.. it take a while sometimes. U Scan for the code.. first u turn on the TV and the Dish Receiver.
now with the Dish remote in hand u see the row of light colored buttons on the very top. one says SAT , then TV then DVD and AUX.
Push and hold the TV button till all four lights are lit.. now U push the small Red TV button, and start clicking the channel UP button (do not just hold it, one click at a time) while pointing toward the TV after a while the TV will shut off. Then u push the Search/# button, the TV light on top should flash three times. now try the Volume and power the tv off.. it it works ,, U did it.. OK for the tricky part if you get bored while clicking and the TV goes off before u notice don't panic... just repeat the first things u did BUT this time u push the Channel Down button, The TV should come back on.. this saves u from have to search all the codes again..next be sure and to push the SAT button to insure u are back in the Dish mode..
If u find a code all u do is push the TV button till all the buttons light up and then enter the three number code and then push Search/ # button. Hope this helps

Posted on Dec 29, 2014

Ad

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • DISH Network Master
  • 76,204 Answers

If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/

Posted on Dec 28, 2014

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cant change channels on my new Vizio HDTV with the dish network remote


There is no setup codes for Vizio TV with Dish Remote control.

Jul 25, 2012 | DISH Network IR Remote Control

3 Answers

Does anyone know the remote code for a sanyo tv model dp42647 on a dishnetwork remote


Remote Codes ' MyDISH ' DISH Customer Support

https://www.mydish.com/support/remotecodes
Remote Control Manuals · Program Remote to TV/Other .... remote, product type, and manufacturer below to see the current known remote codes you should try.

My Dish remote needs programming for Sanyo TV ... - Directly

https://www.directly.com/.../dish-network-my-dish-remote-needs-progra...
My Dish remote needs programming for Sanyo TV, Model DP226649. My Dish ... Needcode. Alta asked this ... Dish Network • 16808 answers • 95% helpful. Code is ... Test volume control, if it works you're set ... try 590 it should work. tivosat.

How do I program my dish remote to work for my Sanyo TV.

https://www.directly.com/.../dish-network-how-do-i-program-my-dish-re...
Dish Network. How do I program my dish remote to work for my Sanyo TV. ... entercode 590 press pound then sat Then try to turn tv on and off then try volume.

How do you program a dish network remote to my sanyo tv? ' Ya


Jan 09, 2012 | Sanyo 42 in. LCD TV

1 Answer

I cant seem to find the code for my proton tv im trying to connect it with my dish network remote to it but i cant find the code can u help me out


Here are some easy steps and codes that should help you out.



1. Hold down the clear TV button until all lights light up at the top of the remote
2. Punch in a 3 digit code (provided below)
3. Press the # (POUND) button
4. Try powering the tv on/off, and the volume. If one or more of these functions do not work, start over from step 1 with a different code

589

Becki Barned
DISH Network Customer Service

Feb 07, 2011 | Protron PLTV-32 Television

1 Answer

Programme remote to work with sony tv


To program your DISH Network remote to your Sony TV you will simply- press and hold the TV Mode button until all the other mode button back lights illuminate, then release.

-Now while the TV mode button is blinking please enter in the remote code 500 which is the remote code for your Sony TV after entering 500 then press the pound (#) key.

-After pressing the # key on the DISH Network remote, the TV mode button should blink 3 times and then turn off completely. This will mean the programming of the DISH remote to your TV has been completed successfully. While still in TV mode try any of the functions on the remote, such as turning the volume up or down on your TV or attempting to press the power button.

-The DISH Network remote should now be programmed to control your TV.

-If the remote code 500 doesn't program the DISH Network remote successfully you can also try each of the following using the same procedures, 000, 590, 640, 502, 002, or 567.

I hope this resolved the issue for you! Please feel free to contact us if you need any additional assistance.
-Kirstie DISH Network

Sep 16, 2010 | DISH Network IR Remote Control

1 Answer

Codes for jumbo remote to dish network


The code for the Dish- are 128,129,130,168,187,188,194,195.....hoppe this was helpful.....

Apr 22, 2010 | Innovage Jumbo Remote Control

1 Answer

Cant program my emerson flay screen tv wiyh dish


Hi tbombertigermy name is Mike Houston of DISH Network and I was going over your post and Isee where your Emerson TV needs to be programmed to your DISH Network remote. Ihave the codes 569, 632, 505, 516 and 004. What you will want to do is holddown the clear TV button for 6 seconds and then press in the three digit codeand the # button. If these keys don't work we do have a step called Power Scanand I will send the link to help with the setup. http://www.dishnetwork.com/SupportSection/power-scan-instructions

Jan 06, 2010 | DISH Network IR Remote Control

1 Answer

Cant find code for dish net remote to control emerson 32lc320emx


wwoodzy

Some TVs will not provide all the features of the TV or won't work with out DISH remotes. I have supplied all the available codes for the Emerson TVs. I hope this helps.

TV codes:
541, 544, 632, 537, 526, 534, 536, 590, 627, 636, 642, 648, 652, 654, 655, 657, 658, 659, 660, 661, 662, 665, 666, 667, 669, 670, 677, 679, 682, 692, 696, 699, 720

Program remote:
http://www.dishnetwork.com/SupportSection/remote-setup

Ray Calo
DISH Network

Dec 12, 2009 | DISH Network IR Remote Control

1 Answer

Cannot find code for dish network remote to control emerson 32 in


Phillip with DISH Network here. We would be happy to help with that.

Step 1:
Press and hold the TV Mode button until all mode button back lights come on, then release.

Step 2:
Use the number buttons to enter the device code corresponding to the equipment. In your case we are going to use the Emerson codes: 764, 632, 648, 670, 699, 194, 537, 537. Then press the pound (#) button.

You should be able to control the volume and turn the TV on and off, if not try another code. Although we try to facilitate you in controlling both devices with one remote we cannot guarantee that we have codes for all the different brands and models of TV's.


Phillip Chang
DISH Network Customer Service Representative

Dec 12, 2009 | DISH Network IR Remote Control

2 Answers

Code for trutech


dish network remotes dont work with very many tv/vcr or tv/dvd combo units

Jul 11, 2008 | DISH Network IR Remote Control

3 Answers

Remote problem


I understand Ilo's are made by Tatung. You may try 0055 or 0003. I haven't confirmed this, but it's worth a try. http://www.hifi-remote.com/ofa/codes-tv.shtml#tv

Aug 24, 2007 | iLO 2600 Television

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top DISH Network Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1257 Answers

The Knight
The Knight

Level 3 Expert

76204 Answers

Sheldon Dedek

Level 3 Expert

909 Answers

Are you a DISH Network Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...