Question about Hobart H600 Stand Mixer

Open Question

Mixer oil for a 60 quart Hobart mixer?

I need the oil type for the transmission and the planetary

Posted by on

Ad

5 Suggested Answers

bigg t

anthony james

  • 640 Answers

SOURCE: hobart 60 quart mixer

the motor protection board is doing its job.you should only use 1st speed to mix pizza dough.im a hobart technician and service these mixers all the time.let me know

Posted on Jan 28, 2008

Ad
bigg t

anthony james

  • 640 Answers

SOURCE: hobart 20 quart mixer

Hi im a service tech for hobart.I cant give service manuals out because i could lose my job but i can step you thru your problem with the mixer,let me know.

Posted on Aug 24, 2008

Ad

monomoy

  • 110 Answers

SOURCE: how to change oil in 20 quart hobart mixer and the

on a a200 there is no oil. this mixer requiers grease. if mixer is leaking oil it is because the grease is broken down .you have to pull tpo cover off mixer remove trans. parts clean out old grease clean all trans. parts reassemble put top cover back on .then make sure mixer runs in all 3-speeds before putting 1.5 cans of -47grease back in grease can be bought @any hobart office

Posted on Jan 09, 2010

monomoy

  • 110 Answers

SOURCE: What type of oil does a Hobart 60 quart mixer use?

a H-600 takes part#102973-71, thehl600 takesthe same just less. dont for get to vote tks. monomoy

Posted on Jan 11, 2010

vestxre

  • 119 Answers

SOURCE: I need diagram of gearbox for Hobart d330 mixer

Parts manuals are available for viewing and free download at www.hobartservice.com

Posted on Jul 16, 2010

Testimonial: "I know,ust can't find them. If you could explain to me how, I would appreciate it"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I change the gear oil in a food service mixer sp62


About 49 results (0.77 seconds) Search Results

    [PDF]Instruction Manual for Globe Mixers - Globe Equipment ...

    https://globeequipment.com/media/product.../Sp10_Owners_Manual.pdf
    Or call the Globe service department at 937-297-7247 and ask for contact .... Please remember that this manual or the warning labels do not replace the need to be alert, to properly train and .... gears or other parts and WILL void the warranty! 7. ... Lubricate the attachment shaft with a food quality grease or mineral oil. 4.

    SP62P 60 Quart Pizza Mixer - Globe

    www.globefoodequip.com/.../mixers/...mixers.../sp62p-60-quart-pizza-m...
    This mixer comes complete with an 60 quart stainless steel bowl, spiral dough hook and bowl ... High torque direct gear drive transmission; Oil bath transmission.

    Globe SP62P Gear Driven 60 qt. Commercial Planetary ...

    www.webstaurantstore.com > ... > Commercial Floor Mixers
    Commercial Planetary Floor Pizza Mixer - 3 HP. In stock ... What is White Glove service? ... Globe XXBOWL-62 60 Qt. Stainless Steel Mixing Bowl for SP62P Mixer.... Planetary grease fitting and gear oil meter. .... Globe SP62 and SP80PL MixerControls .... 2003-2016 WebstaurantStore Food Service Equipment and Supply .

Jan 30, 2016 | Globe Food Mixers

1 Answer

A gasket type rubber ring is coming out of the assembly that the beater is attached to? it will not stay in place. where does it go? in the PLANETARY UNIT?


Get a copy of the Repair Part List for your model at Kitchenaid.com
Download a Copy of the Kitchenaid Service manual.

http://www.kitchenaidparts.be/centers/servicemanual/mixer.pdf

Somehow the O-Ring is coming off of the Vertical Center Shaft (11)
That rubber ring prevents Oil from the transmission gears dripping down
to the Planetary into your mix.

Aug 03, 2011 | KitchenAid KSM150PS Artisan Series Stand...

1 Answer

Leaking oil


There are only two places where Food Grade Grease is used: In the
Transmission Housing (normally installed with a gasket) and in the Planetary
Assembly (Agitator gear). Over times, the grease will get hot and turn into liquid.
The Beater shaft has an O-ring to prevent oil from leaking down, but there is
nothing to prevent oil from the Planetary from making its way down your mix.
Depending which model you have, it's time to open up your mixer, clean out
all the oil and replace it with fresh Kitchenaid Food Grade Grease.

Jun 25, 2011 | KitchenAid Food Mixers

1 Answer

What type of gear lube should I use for my Hobart H600 mixer?


Hi, btperduell

below is a copy of an e-mail from Horartservice.com. I searched the web forhours for the correct oil and could not find any info so I e-mailed Hobart. The Planetary is a different part from the transmission andthe sight glass on a M802 is for the oil in the transmission. The answer that Hobart gave is not an NSF oil. Ineeded the oil for the planetary section on a model M802. Even the directionssay that it is normal for a drop of oil to occasionally drip from the seal.That is where the dough hook attaches. I am in the process of researching the oil and Exxon / Mobildoes make a NSF version. I just need to find somewhere I can buy less then a 55-gallondrum. The above mixer only uses 6 ounces. Take care and stay safe Thank you Mike Hobart E-mail follows ============================================================== Mike, Hobartuses "EXXON SPARTAN EP-150 (6 oz)" in the M802 planetary. Hobart part #102973-13. This IS NOT a food grade oil. If you mixer is leaking you shouldhave it serviced. Service, parts , lubricants and information canbe obtained by contacting your local Hobartoffice in Pittsburgh@ (412) 788-5380. Steve Davis Field Engineer - Food Machines Product Service - Tech Support
b>

Jan 15, 2011 | Hobart HL600 Legacy Stand Mixer

1 Answer

What kind of oil i can used for hobart d300


Transmission uses #0 weight grease, best to get direct from Hobart (their grease is the correct weight and approved by U.S. FDA & USDA as safe for use in food equipment) but if you insist on not doing so, at least obtain an Extreme Pressure #0 grease and don't overpack the transmission, I believe it should have 35 oz. if memory serves right.

Uses a heavier grease for the planetary gear, use #2 weight. Don't need much, just a light coat on the planetary gear.

Bowl lift rails use medium weight oil, again use food grade oil supplied by Hobart.

Aug 02, 2010 | Hobart D300 Stand Mixer

2 Answers

I have a v1401 and its oil level is low. Where


you can buy @any hobart office in your area.

Jan 15, 2010 | Food Mixers

1 Answer

Making noise in planetary gear area. we have a l 800 hobart mixer just purchased ,has wirring noise planetary gear area ,i 'm quite sure it is common wear from use , but want to repair...


The noise you are describing sounds like the noise associated with the pinion gear meshing with the ring gear in the planetary. Depending on the age of the unit, some noise is to be expected. The lubricant used in the planetary is different than that of the main transmission and is not visible without disassembly. Again, depending on age of the mixer, your planetary may have a small amount of oil and a pump to bathe the gears or just a generous amount of grease applied to the gears. The only way to properly inspect the planetary is to remove it. Depending on your luck, this may be 20 min job or several hours. It all depends on the ease of which the planetary releases from the main center shaft. Should you decide to tackle this job yourself let me know and we'll do our best to assist you. Several knowlegeable techs monitor this area of the site.

Sep 13, 2009 | Hobart P660 Stand Mixer

1 Answer

LEAKING OIL SEAL ON HOBART 660 CAN'T GET PLANETARY TO COME LOOSE


Definitely need to remove the acorn nut. There should then be a few thinner nuts as well. Make sure to drain the oil from planetary first and also be careful as the entire assembly is heavy. If I recall correctly, you need to be aware of a fiber gear that follows the inner gear (sun gear) and drives the oil pump that is mounted inside the planetary.

Jul 18, 2009 | Hobart Food Mixers

1 Answer

Oil leak from planetary


The transmission center shaft seal/chimney is bad.You need to tear the transmission down in order to repair,let me know.

Apr 29, 2009 | Hobart H600 Stand Mixer

1 Answer

Hobart A200 oil leak


grease coming out the planitary on bottom normally means it needs taken apart completley cleaned out of old grease and new seal and newer stile spacer seal goes around with the O-ring on it. and factory grease. the noise impossble from here to tell.

Sep 10, 2008 | Hobart A200 Stand Mixer

Not finding what you are looking for?
Hobart H600 Stand Mixer Logo

Related Topics:

896 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hobart Food Mixers Experts

Ross Keen

Level 3 Expert

1364 Answers

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Bruce Showalter

Level 2 Expert

133 Answers

Are you a Hobart Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...