Question about Rascal 600 T Electric Scooter w Seat Lift - Used Mobility Scooters

1 Answer

Replacement of rascal 600t headlamp

I need instruction on how to replace the headlamp bulb

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 313 Answers

Hi, To get to the head light bulb you need to take the tiller head apart by removing the screws that go up from the bottom. The top will lift off but be careful not to pull any wires off. This will give you access to the lamp at the front. Make sure you replace the bulb with the same type and voltage.

Posted on Jan 13, 2015

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Electric Mobility: Replacement scooter charger


Rob, If need be, possible you can adapt you old chargers connector onto new charger if not the same plug. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
24 Volt 4 0 Amp On Board Battery Charger for Rascal Scooters and Power...
RASCAL 600 600t HANDICAP MOBILITY SCOOTER PRISM 24V BATTERY CHARGER...

Aug 17, 2016 | Electric Health & Beauty

1 Answer

LOOKING FOR A WIRING DIAGRAM FOR RASCAL SCOOTER 600T


go to http://www.strege.com/BlueDoc click on rascal then click 600

I’m happy to assist further over the phone at https://www.6ya.com/expert/bill_bcbb89783b08c489

Aug 23, 2015 | Health & Beauty

1 Answer

Electrical diagram for rascal 600T


check the link Scooter Doctor App check the rascal section

I’m happy to assist further over the phone at https://www.6ya.com/expert/bill_bcbb89783b08c489

Aug 23, 2015 | Health & Beauty

1 Answer

How do I replace the headlamp bulb?


Hi, to get to the head light bulb you need to take the tiller head apart by removing the screws that go up from the bottom. The top will lift off but be careful not to pull any wires off. This will give you access to the lamp at the front. make sure you replace the bulb with the same type and voltage.

Jan 13, 2015 | Rascal 600 T Electric Scooter w Seat Lift...

1 Answer

Need a battery charger for rascal 600t


I recommend the 5 amp Charger. Monster Scooter Parts have them.

I’m happy to assist further over the phone at https://www.6ya.com/expert/bill_bcbb89783b08c489

Apr 09, 2014 | Electric Mobility Power Electric Scooter...

1 Answer

Rascal 600T Scooter FIX IT Manual


There is an owners manual available which has a troubleshooting guide at the following: http://manuals.monsterscooterparts.com/mobility/Rascal/manual-rascal-600-t.pdf

If you have a good relationship with a local dealer they may be able to copy and provide you with one.
Electric Mobility, the manufacturer, in my experience will not provide one to you.

Mar 02, 2014 | Electric Mobility 3 Wheel Motorized...

1 Answer

How do I replace the headlight assembly MN133516


The 2003 Outlander utilizes replaceable (9007) headlight bulbs. If you're looking to replace the bulb(s);
1. Raise the hood.
2. Remove the plastic cover at the rear of the headlamp assembly by rotating it counterclockwise, and pulling it off. This will allow access to the headlight bulb.
3. Twist the bulb socket counterclockwise in order to remove it from the headlamp assembly. Pull the old bulb out of the socket, and use a clean cloth to install the replacement bulb. Do not touch the glass of the new bulb.
4. Place the socket back into the assembly, and twist it clockwise. Reattach the plastic cover, and close the hood.
Are you needing DIY instructions for replacing the entire headlamp assembly? Left (driver) or Right (passenger)?

Jan 18, 2013 | 2003 Mitsubishi Outlander

1 Answer

Batteries do not charge but charger is working. Rascal 600T todusty@juno.com


mcdevito75 here, You may need new batteries, if they are 2 years old or more.

Jul 02, 2010 | Electric Mobility Mobility Electric Power...

1 Answer

How do I Remove Headlight Assembly on my 1998 Eclipse and is there anyplace I can go to get a diagram


Things You'll Need:
  • Replacement Headlamp 60/55W H13
Instructions
  1. Open the hood and find the front headlamp assembly.
  2. Depress the black tap holding the harness connector to the headlamp assembly. Pull the connector toward you to remove it.
  3. Turn the bulb assembly counterclockwise and remove the headlamp from the car.
  4. Check the new bulb against the old bulb for an exact match. The wattage and rating should be the same or the headlamp may not work correctly and could damage the vehicle.
  5. Insert the new bulb into the assembly and turn clockwise.
  6. Reconnect the harness connector by firmly reinserting it into the back of the assembly.
  7. Turn on the headlamps to check the alignment of the replaced bulb.
Tips & Warnings
  1. Vehicle headlamps can get extremely hot, make sure the lights are off for a significant amount of time before touching them.
  2. Halogen bulbs shatter easily, so handle with care

Nov 18, 2009 | 1998 Mitsubishi Eclipse

1 Answer

Instructions on replacing headlight assembly


96 f150 procedure

Headlamp Assembly Removal
  1. Remove radiator air deflector from radiator support.
  1. Remove two screws and two nuts retaining headlamp door (13064).
  1. Pull headlamp door from vehicle. Remove three bulbs and sockets.
  1. Disconnect engine control sensor wiring (12A581) from headlamp bulb (13007).
  1. Remove two retainers attaching upper two attachments of headlamp (13008).
  1. Turn horizontal headlamp adjusting screw (13032) completely out of the adjusting nut.
  1. Pull headlamp from vehicle.

Oct 17, 2008 | 1994 Ford F150 Styleside Supercab

Not finding what you are looking for?
Rascal 600 T Electric Scooter w Seat Lift - Used Mobility Scooters Logo

363 people viewed this question

Ask a Question

Usually answered in minutes!

Top Rascal Health & Beauty Experts

Rob Hill
Rob Hill

Level 3 Expert

1412 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

6103 Answers

Tom Chichester

Level 3 Expert

55370 Answers

Are you a Rascal Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...