Question about Hampton Bay Ceiling Fan. Windward IV 52 in. Indoor Oil Rubbed Bronze

1 Answer

Hampton bay fan responds to remote control selection intermittently.recently it turned the light and fan on but neither would respond even after a battery change

Changed the remote battery, fan and light controls work intermittently at best or not at all. indicator light in remote works with all button functions

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Hampton Bay Master
  • 54,974 Answers

The problem could be a defective receiver.

Posted on Feb 09, 2015

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Hampton Bay Miramar 60 in ceiling fan, when you try to turn it on the upper light just blinks and nothing else happens. You can't even turn the blinking light off. HELP!!!


Turn off the breaker that controls power to the fan. Remove the batteries from the remote and press the buttons in case one is stuck. Reinstall batteries or new ones. Turn on the fan breaker and try using the remote again

Dec 16, 2012 | Universal Remote Control Hampton Bay...

1 Answer

Fan not responding to remote


Check to see if the remote switches of your hand held device match the switch setting in the fan assembly

Sep 15, 2009 | Hampton Bay 52 In. White Redington...

1 Answer

Unable to get fan to respond to remote Hampton Bay 54


these fans must be reset as follows remove the battery from the remote manually turn off the wall power switch put the batteries back in the remote turn on the wall power switch press the remote buttons...if this doesn't work let me know

Jun 01, 2009 | Universal Remote Control Hampton Bay...

1 Answer

Unable to get fan to respond to remote Hampton Bay 54".


There is most likely a wall switch which you will need to ppush to the on position to send power to the fan, then the remote will do as it is supposed to do. If you find that it is not the wall switch, then I would check the electrical panel for a circuit breaker that has kicked partway off or blown fuse.

Apr 26, 2009 | Universal Remote Control Hampton Bay...

1 Answer

Ceiling fan/light quit working with remote


Fan does not respond to remote, checked and replaced batteries in remote. No response, and unfortunately it is now well out o warranty but have the same fan in another room purchased same year 2003 which is moving along fine. Cannot find instruction book for either one. Please help. Thanks

Dec 11, 2008 | Hampton Bay (261025) Dual Mount Ceiling...

3 Answers

Remote control


in the remote and the fan the little blue box is called a dip switch
you will have to open fans base to access the remote power sender
on both the fan and remote the dip switches have to match in order for the remote to work the fan properly
or your signal will never make it to remote box

Jun 05, 2008 | Hampton Bay 24002 Ceiling Fan

1 Answer

Remote


If the fan is not responding to the remote. Then it is the controller inside the fan. To order a replacement part contact "King of Fans" who owns the warrenty for Hampton Bay. The number is 800.749.3267 for about 43.00. Hope this helps.

Mar 02, 2008 | Hampton Bay 46056 Callaway II Ceiling Fan

1 Answer

Hampton Bay 46056 fan


I have three Hampton Bay Ceiling fans with remotes for eight years. I doesn't help when a neighbor buys the same make and model. So, I had to come up with a different code for mine. I had to change the code for the remote and match it with the code in the fan. To change the code in the fan, that depends on the type of fan you have, some you would need to look on top of the fan and use a skinny stick to change the code, other's you would need to take the light fixture down to get to the controller box to change the code. I have both types, this is how know. PS. if ever, which will happen, if the fan doesn't respond to the remote then you would need to replace the controller inside the fan. Here's the warrenty no. 800.749.3267 for replacement.

Dec 24, 2007 | Hampton Bay 46056 Callaway II Ceiling Fan

Not finding what you are looking for?
Hampton Bay Ceiling Fan. Windward IV 52 in. Indoor Oil Rubbed Bronze Logo

309 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hampton Bay Dryers Experts

Ronald Buckner

Level 1 Expert

21 Answers

Donald Klecher
Donald Klecher

Level 1 Expert

4 Answers

Gene Pitts

Level 2 Expert

159 Answers

Are you a Hampton Bay Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...