Question about Electrolux Coffee Makers & Espresso Machines

Open Question

I need to get a copy of the Electrolux A Modo Mio Coffee Machine ELM5250. Thanks

Water does not pass through the unit. Tried descalers, checking for pipe blockages. I just want to pull it apart to see where the problem lay. Customer Care has just replied the same things over and over, 'check spout and descale' otherwise provide a post code for the local service centre.

Posted by on

  • Brady McKenzie
    Brady McKenzie Feb 10, 2015

    Sorry, I meant a copy of the Service Manual rather than the regular manual

×

Ad

3 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Pierre Laplante

  • 2042 Answers

SOURCE: Blocked coffee 'spout'

you have to remove the piece with hole in it you got 1 side that block if you dont whant to remove try with steel wire pass that in the hole it should unblock cheers

Posted on Jan 24, 2008

Ad

Thomas

  • 10 Answers

SOURCE: water temp and descaling lights flashing

you need to descale the machine as per instruction

Posted on Oct 15, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error code 5 on saeco minuto coffee machine


Error code 5 means the water flow is obstructed. Here are possible locations:
1- The machine was not descaled. Calcium deposits are clogging the water system.

2- The flow meter is not passing impulses for water flow speed & quantity.

3- Descale Descale Descale.
Before you select the automatic descaling, make a few espresso without adding coffee grounds. The automatic cycle does not clean the coffee side of the machine. You have to do it intentionally.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edward_bbd2c7ff4ee1828a

Dec 18, 2016 | Saeco Coffee Makers & Espresso Machines

1 Answer

Why does my lavazza mio coffee machine get stuck?


Hi dear
You're in the wrong category (printers & copiers)! repost this into the correct one :)

Jul 24, 2016 | AEG A Modo Mio Favola Lavazza Espresso...

1 Answer

Metallic tasting coffee


You need to look in your manual and descale the unit. When you do this, make sure you use vinegar and water. This will take care of most of that. Also when filling your machine with water, if you use bottled water or going through a good water filter system will help this. So, between descaling the machine, with vinegar and water, and filtered water will help this go away. Thanks Mike

Please rate my solution if this was helpful. Thanks.

Sep 30, 2011 | Keurig B70 Coffee Maker

1 Answer

My capresso coffeeTeamGS maker will grind the coffee but will not brew it????


Hi. Your brew unit is by passing the water that is supose to brew. You'll have to clean the brew unit. Jura brewunits are not easly removeable, + you can't buy parts unless your a authorised repairer. Try doing a manual descale cycle. You need to add descale solution to the watertank and operate the hot water and steam functions, which allows the solution to enter the system. Open these functions until water and steam are pumping through, then switch them off and let it sit for a few minutes, then repeat the above 5 or 6 times. This allows the solution to break up any build up. OK, now you have manualy descaled the steam and hot water circuits. Now allow the machine to try and make coffees." we are only trying to clean the machine, so dont drink the coffee." Try 5 or 6 times to see if this is starting to brew better. WE DO NOT LEAVE THE DESCALE SOLUTION IN THE MACHINE. We need to flush the system with fresh water as per above. Descale is corrosive, so we need to get it all out. I hope this has worked for you, other wise you'll have to take it to an authorised repairer. Dazza REPAIRER

Sep 24, 2011 | Jura Capresso CoffeeTEAM GS 46405

2 Answers

I have a Solis Palazzo machine. My question is:


HI When was the last time you descaled? This can have a temp lowering effect if you don't descale on a regular basis. Program you water hardness so its set on 4. This will tell you when you have to descale. Descals is not the same as cleaning. Its a special acid that disolves the deposits inside the boiler.

Jul 24, 2010 | Solis Palazzo Espresso Machine

1 Answer

Lavazza coffee machine will not heat up the coffee


For Lavazza A Modo Mio only call 0800 599 9200 -they can help over the phone or if still no solution they will refer you to Lavazza UK who have the answers for AMM.

Feb 05, 2010 | Lavazza Espresso Point Capsule Machine

2 Answers

It's blinking de-scale side water holder gets r4eally hot water is not coming out properlywhen u press one of the cup size bottons


Hi,

This is the time, you need to Descale the machine. The simple procedure is :-

Unfortunately, in spite of the best-laid plans of mice and men, espresso machines often get clogged by scale, deposits of minerals from hard water. Scale can cause serious damage if untreated. If your espresso machine's water flow has decreased a lot, it's probably because of scale. Fortunately, there is an easy and inexpensive way to descale your espresso machine.

  1. Obtain some citric acid. You can either order this online or find it in the kosher foods section of the supermarket (usually marketed as "sour salt"). Acid solutions dissolve scale, which is made of calcium carbonate. There are special solutions marketed specifically for descaling, but citric acid works just as well and is much cheaper.
  2. Prepare the descaling solution by mixing citric acid with water (I use two tablespoons of acid and a quart of water).
  3. Put the descaling solution in the water tank, turn on the machine, and run water through the steam wand until the cup is filled, to expose the parts to the solution. Turn off the machine, and leave it for 20 minutes so that the solution has time to dissolve scale.
  4. After 20 minutes, run more water
  5. Run solution through the machine every 20 minutes, until the water tank is empty.
  6. Fill the water tank with plain water, and run water through the machine until output water no longer tastes sour. This is important, because excess citric acid does not make coffee taste good.
Let me know, if need further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!


Oct 12, 2009 | Keurig Coffee Makers & Espresso Machines

1 Answer

Expresso machine


descaling gonna improved the pressure = stronger coffee and clean the inner boiler =warmer coffee but use descaler only not vinegar descaler melt calcium vinegar remove some calcium in littlt piece 1 part descaler 1 part water fill the water container open valve for a few second close it leave it for 15 minute and repeat untill empty after rince very good that stuff is corosif


THANKS FOR USING FIXYA

FROM MONTREAL CANADA PIERRE

Feb 18, 2008 | DeLonghi BAR 14 Espresso Machine

2 Answers

Significant leak into drip tray when brewing and using steam/hot water


run a 50/50 mixture of white vinegar and water thru your system.may have to run it twice,should clear it up if its a mineral clog. be sure to run a few cycles of clean water afterwards to clear the system

Dec 01, 2007 | Saeco Vienna De Luxe Espresso Machine

Not finding what you are looking for?
Coffee Makers & Espresso Machines Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Electrolux Coffee Makers & Espresso Machines Experts

ThaMp3Doctor
ThaMp3Doctor

Level 3 Expert

8597 Answers

Pierre Laplante

Level 3 Expert

2042 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

Are you an Electrolux Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...