Question about Epson CX8400 All-In-One InkJet Printer

1 Answer

Cannot Print from on Epson CX8400 from Mac OS X Leopard

Followed all Epson's instructions, reloaded latest drivers. Whenever I print the printer either puts the job on hold or spews out blank pages. Scanner works fine. Now running out of ideas apart from dumping the printer!

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I could only get my CX8400 to work with Leopard once I manually selected the driver located at /Library/Printers/PPDs/Contents/Resources/EPSON Stylus CX8400.gz

I think that may have appeared after installing a driver downloaded off the web, but I didn't track my steps carefully enough to be certain. I used http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid=90342&prodoid=63069506&infoType=Downloads&platform=Macintosh

I know this is a bit jumbled, but hopefully it helps.

Posted on Jul 22, 2009

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WHY DOES MY PRINTER ALWAYS SPEW OUT A BLANK PAGE AFTER PRINTING SOMETHING


Most likely you have configured the printer to output a "cover sheet" as used in a large organization, to identify you as the owner of the print job, but you've not put your name in it. This is likely in the "printing preferences" part of the setup.

Mar 09, 2016 | Office Equipment & Supplies

1 Answer

Why wont my epson printer model # cx9300f print


Okay I would first go to epson's site and get the latest drivers for the device. The problem could be if your using the driver given to you by the manufacturer that the drivers could be useless due to a random windows update. Verify that you have the latest drivers and then attempt to connect the device again. If you continue to get the communication error then the device is likely faulty and needs to be replaced.

Sep 14, 2014 | Epson Stylus CX9300F Series

1 Answer

Prints blank pages and gibberish


You may have to shut down the printer completely, including disconnection of power. When you reapply power, the printer should be indicating it is offline so you will have to put it online again.

Dec 04, 2013 | HP Laserjet Pro Cp1525n Color Printer...

1 Answer

Hi the Epson R350 printer when it prints a photo it is going beyond the size of the photo size with a narrow strip of cyan evenally spaced all the way down the photo like its over printing. It only the one...


There are several potential solutions:
First, see if the paper guidance system is working properly and is aligned properly. It may be a case of misalignment, so the paper is positioned too much at one end so the print heads seem to be going off the page, while in reality the paper is to the side. If the print cartirdge box is aligned as the CMYK model, then the Cyan color is printed on last, with Magenta Yellow and Black spewing out ink onto the paper guiding mechanism.
Second option is print head misalignment, so you'll need to run a realignment procedure from your Epson control panel software.
Third is a drivers issue. Make sure you have the latest drivers that match your operating system, here's the download page http://www.epson.com.ph/epson_philippines/support/eol_product.page?support_name=Epson_Stylus_Photo_R350
If this doesnt help, a general reset of the printer may be useful: Turn off printer, then press and hold 'stop' 'maintenance' and 'power' buttons for about 10 seconds. A message will appear on the screen. power off and back on for reset.

Jan 02, 2011 | Epson STYLUS R350 Photo Printer

1 Answer

E-studio4511 won't print more than 1 page of a pdf file at once.


download the latest PS driver off toshibas website, due to adobe 9 update this is a known issue, newest driver should fix

May 13, 2009 | Toshiba e-STUDIO 4511 Printer

1 Answer

Epsom scanner cx4800 prints blank


If the test page does not print you need to reinstall drivers.

Download the drivers from Epson Driver Download if you do not have the original disk.

Feb 02, 2009 | Epson Stylus Multifunction Inkjet Printer/...

1 Answer

New Epson RX595 won't print


Apparently the latest software doesn't work with Leopard 10.5.2. I uninstalled the Epson software and installed the earlier version [driver version 3.88] that come on the Installer CD with the printer. Printing now works.

May 18, 2008 | Epson RX595 Photo All-In-One Printer

1 Answer

RX500 EPSOM STYLUS PHOTO PRINTER Won't Print


I used some less expensive generic ink cartridges on my RX500 and had a similar experience with the black. If you're already using the Epson brand, done the head cleaning, realignment and nozzel checks, I'm not much help. Try Epson's support at their web site.

Mar 25, 2007 | Epson Stylus Photo RX500 Printer

1 Answer

No printing


The issue that your having is not with the software. Try cleaning the heads using the printer utility/driver, then try to take the cartridges out and put them back in. Then try to print

Jan 26, 2007 | Epson Stylus Photo R1800 InkJet Printer

Not finding what you are looking for?
Epson CX8400 All-In-One InkJet Printer Logo

896 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Alun Cox

Level 3 Expert

2679 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Ekse

Level 3 Expert

13434 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...