Question about Kenwood Food Mixers

1 Answer

How can I remove K beater from my Kenwood patissier which is jammed

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Kenwood Master
  • 1,364 Answers

Only a bit of CRC and some brute force is going to work. Unplug the machine. Remove the bowl, lock the head down, squirt some CRC around the top of the paddle where the shaft goes in. Get someone to hold the mixer from moving about then grip the paddle firmly with 2 hands and turn it left and right. Gradually you will begin to get increasing movement until in the end you will be able to unlock it from the shaft. Once it is off you will need to thoroughly clean the shaft then you will need to scrape out the inside of the hole in the paddle. I carefully use a small round file, I am trying to clean the hole out, not increase the size of it beyond what originally was. The hole size has become smaller over time because of flour or similar entering around the shaft during use.

Posted on Mar 02, 2015

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I removed the beater to bowl screw. how do i fix it?


Hi Mary, There is no such thing as a beater to bowl screw. If you screw the beater to the bowl then it cannot turn without also turning the bowl. Here's a link to an exploded view
https://www.manualslib.com/manual/413887/Kitchenaid-Kt2651xww.html

Jan 16, 2018 | KitchenAid Kt2651xww Epicurean 6-Quart...

1 Answer

Cannot remove the flexi beater


I have read on other posts that it is the nut at the top of the beater that is causing the problem. You need to rotate it downwards toward the beater in order to have sufficient room to push and rotate the beater out. This didn't work for me, nor did attempting to remove the whole plate by undoing the lug beside the beater insert. Now that I have worn the lug and the nut I cannot get it repaired at a Kenwood service specialist as I have attempted the repair myself.
My advice is to go straight to a professional. Whatever they charge it will be cheaper than being stuck with a machine you can only use some of the time and have to replace!

Dec 31, 2012 | Kenwood KM400 / KM410 Chef Classic Stand...

1 Answer

Can alter the height of the beater


If this is, in fact, a factory error Kenwood should be able to advise you on how to correct it

Dec 22, 2012 | Kenwood Chef Classic Km336 4.6 Litre...

1 Answer

I need a apart part for kenwood major a 171C. The shaft where the beaters connect to machine is broken cogs etc are fine


This is the only thing I could find in order for you to get parts...This is their phone number in UK..Kenwood Spares Distribution Centre on 0870 241 3653 If I uncover anything else I'll let you know...

Jun 27, 2012 | Kenwood Food Mixers

2 Answers

The beater shaft seems jammed. I can't push it up to remove my beater.


best returned to service centre as these are very hard to get apart.

Sep 15, 2009 | KitchenAid KSM150PS Artisan Series Stand...

1 Answer

Can't remove beater kmix from machine. it's stuck!kenwood


Here's how to fix the stuck implement problem:

The implements each have adjustable heights. to adjust the height you need to loosen the bolt at the top with a 14mm spanner. If the bolt was loose when it was being used then it can get too short and not leave enough clearance between the bolt and the machine in order to push up and turn to release the implement. If this happens take the open ended spanner, grasp the implement and rotate the spanner clockwise (when looking up at the machine from below. Once the nut is loose rotate the implement until there is enough clearance to remove it normally.

Jun 05, 2009 | Kenwood KM300 Chef Stand Mixer

1 Answer

K-beater is stuck on our Kenwood Chef and we can't remove it


I couldn't remove the K-Beater as when I tried to turn it the whole mechanism turned with it. I couldn't even remove the splashguard! I was going to take it to the Kenwood factory (a few miles from home) but then I thought I'd give it one more go and this is what I did...
  1. Next to where the K-Beater attaches in the middle of the circular plate is a lug with a pointed-shape bolt on the end. Remove this with a spanner and the beater plus gear cog can be removed.
  2. Place some mole grips or wide pliers on a worktop and sit the cogged gear in to it and grip so that it won't turn.
  3. Now you should be able to remove the K-Beater!
Perhaps someone can suggest how to stop it happening again. I haven't attached anything since but will update this post if I have any other helpful tips.

Feb 15, 2009 | Kenwood KM400 / KM410 Chef Classic Stand...

1 Answer

New Kenwood chef km 001 - I can't get the beaters out!


Try turning the beater in the reverse direction to the direction it normally turns - clockwise looking at the beater (I think), this should make the shaft pins ride up on some cams which should release the beater.

Sep 23, 2008 | Kenwood KM800 Major Classic Stand Mixer

1 Answer

Kenwood HM 220pk100/W


Hi,

There are not any spare part more than Beaters, Kneaders and Beater gears to this machine.

Jul 06, 2008 | Kenwood 120 Watts HM200 Hand Mixer

1 Answer

The K Beater


It is most probably the nickel plating seperating of the the beater surface unless it is actually hitting the side of the bowl. You may need to replace the beater as it is not good to eat food with metal in it.

Ashburton

May 17, 2008 | Kenwood KM400 / KM410 Chef Classic Stand...

Not finding what you are looking for?
Food Mixers Logo

Related Topics:

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Food Mixers Experts

Peter GW Fleming

Level 1 Expert

3 Answers

Treefrog15
Treefrog15

Level 2 Expert

130 Answers

Yitz Diss

Level 1 Expert

9 Answers

Are you a Kenwood Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...