Question about Kenmore 24032\24036 Top Load Washer
It depends on WHERE the leak is coming from. If the leak is coming from the FRONT area of the washer, the drain pump or drain hoses are suspect. If the leak is coming from the REAR of the washer, the water inlet hoses, water inlet valve, or dispenser hoses may be suspect. If the leak is coming from under the CENTER portion of the wash tub, the tub seal or wash tub may be suspect.
The first step is to remove the exterior washer case to gain access to view. The following link explains how to replace a water pump (if required) on your washer, but also includes all the steps necessary to access the washer interior:
Allow the washer to fill about 1/3 of the way and turn it off before unplugging and removing the washer casing. The washer will not run once you disconnect the lid switch connector, so you will need some water in the tub to see where the leak may be coming from.
NOTE: If the problem IS a leaking pump, these pumps are not serviceable and will need to replaced.
If you have questions, or need additional assistance, please let me know. I hope this helps you.
Posted on Jul 09, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Dec 04, 2011 | Kenmore 24032\24036 Top Load Washer
Nov 13, 2017 | Kenmore 22422 Top Load Washer
Feb 27, 2010 | Kenmore Washing Machines
Jan 15, 2010 | Kenmore Washing Machines
Dec 11, 2009 | Kenmore 22422 Top Load Washer
Nov 25, 2009 | Kenmore 22422 Top Load Washer
Aug 31, 2009 | Kenmore 24032\24036 Top Load Washer
Jun 27, 2009 | Kenmore 22422 Top Load Washer
Nov 22, 2008 | Kenmore 22422 Top Load Washer
153 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: