Question about Fisher and Paykel 24 in. DD603H W Built-in Dishwasher

1 Answer

F 5 error top draw only - Fisher and Paykel 24 in. DD603H W Built-in Dishwasher

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Fisher and P... Master
  • 3,247 Answers

Fault code F5 is a lid fault error. It could be one of many issues and generally will need a technician to fix it. The problem could as simple as the lid seal that seals the drawer being displaced or the actuator motors that bring the seal down being faulty. Turn the mains power off to the dishwasher and back on. This should bring the actuator motors to start position. If this does not fix it then check under the top housing for any signs of lid seal break. If it looks ok then you have to call technician to fix it. The fix involves taking the drawer out carefully without damaging the wiring and hoses underneath and checking the lid seal assembly underside of dishwasher housing.

Posted on Mar 15, 2015

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I am unable to turn off screen overlay. I tried doing so in app settings by turning off all permission. It is still on, how do I remove it. ZTE 798BLi


Hope this help.
1. From your home page go to Main Settings by pulling down the Notification Bar and clicking on the Settings icon at the top right of the screen. (it's gear shaped)
2. Scroll down the Settings menu, and click on Applications under the Phone section about two thirds down the page.
3. At the top of this new menu click on "Applications Manager".
4. In the top right corner of the Applications Manager menu click on "More"
5. Now a click on "Draw over Other Applications"
6. Scroll down this menu and find the offending application, in this example "Facebook"
7. Click on the button to the right of your offending application to deselect it.
8. Close out of the Settings menus.

NOTE: Alternately, deselect all the applications under step 8 except those you know pop up over other applications such as messaging, for example.

Feb 04, 2018 | ZTE Cell Phones

1 Answer

Its not printing says problem of opencover


hi

go to this link (see below) .. it will list the issue near bottom of page.. follow instructions (read carefully and entirely )

The top access door on the printer might be open, or there might be something wrong with the print cartridge.

Solution

  1. Check to make sure that the top access door is firmly closed.
  2. If the light continues to blink, open the top access door. When the top access door opens, the print carriage moves so the yellow arrow on top of the print carriage points to a drawing of a cartridge. Each drawing describes a symptom. Find the drawing in the following table, and then review the solution as necessary.



http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=ca&taskId=110&prodSeriesId=304441&prodTypeId=18972&prodSeriesId=304441&objectID=c00035263

if this deosnt solve problem, let me know , i will continue research
-- i need excat error that it indciates

--BUT please do not rate with less than 4 star.

Nov 22, 2010 | HP DeskJet 5652 InkJet Printer

1 Answer

Dishdrawer DD601 v2 Error F1 on the bottom draw.


Hi,
Below is the link to the service manual
http://www.scribd.com/doc/6462163/DD601V2-Manual
This will be able to explain the problems better that I can in the tiny space I get to write in.
Mat
Please rate me

Mar 15, 2009 | Fisher and Paykel 23 in. DD-603SS Built-in...

3 Answers

Fisher & paykel double dish drawer top draw just beeps...


The controllers get very brittle & can break away from their housing, the reason it's rapidly beaping is because it thinks the door is open. PLEASE TURN IT OFF FIRST AT THE POWER POINT. Take the front draw panel off by pulling the plugs situated on the front behind the draws, the controller is at the top right hand side if it is loose then thats the problem, double sided tape will work but lots of it or try a wedge type arrangement. I know this is an old post but people refer to these for solutions much later.

Mar 09, 2009 | Fisher and Paykel 23 in. DD-603SS Built-in...

2 Answers

Water coming out of draw on rinse and spin and f8 error code


may have a blocked pump. f8 is a heater problem.
engineer required i'd say

Jan 13, 2009 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

Blockage (i think) top draw - seal orginally locking draw


after you remove the rack you can also remove the large stainless cover( it unscrews, and then under that id the rotor assy , it also unscrews, giving you access to the ports that would be blocked if any, you can refer to your manual for procedure of un-installing above parts if need be, it is something the homeowner is actually advised to do instead of calling for service

Nov 30, 2008 | Fisher and Paykel 23 in. DD-603SS Built-in...

1 Answer

Top Draw flashing lights and playing music!?..


this sounds exactly like the problem we had the tech cam out removed the draw and found hte fuse on the heater element was blown -Because the dishwasher was under warrenty he replaced the heater the computer and gave us a new impella

********I'm guessing here but I think you can replace the fuseable resister in the heater element and all will be fine***

Oct 18, 2008 | Fisher and Paykel 24 in. DD603H W Built-in...

1 Answer

C1 error code


CL code stands for overloaded motor. Motor is drawing to many amps and cuts out. I suspect a failing motor or something binding that causes the motor to draw to many amps. Don't know how to fix it.

Aug 20, 2008 | Whirlpool Calypso GVW9959K Top Load Washer

2 Answers

Dish drawer DD601v2


thats tub home sensor switch, mounts to rear right of cabinet and senses drawer closing along with little black box with red switch should also have a little metal actuator( this is what usually breaks off switch), each drawer uses their own. unistall from cabinet and theres an access panel strictly for replacing theses switches

Feb 12, 2008 | Fisher and Paykel 24 in. DD603H W Built-in...

Not finding what you are looking for?
Fisher and Paykel 24 in. DD603H W Built-in Dishwasher Logo

Related Topics:

177 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fisher and Paykel Dishwashers Experts

Mark Davis

Level 1 Expert

18 Answers

Bruce Denton

Level 2 Expert

273 Answers

Paul Bade

Level 3 Expert

1662 Answers

Are you a Fisher and Paykel Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...