Question about Fishing

1 Answer

Can I get a maintenance manual for a Daiwa Procaster Magforce PMF 53H

Found discarded, needs oil and/or greese. Need to know how to disassemble and reassemble for maintenance purposes.

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • Master
  • 2,288 Answers

2 Suggested Answers



Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Colin Stickland

  • 22485 Answers

SOURCE: I need a detailed schematic of a 1990 ford f250 steering wheel column that includes directions for disassembly and reassembly

Go back to the dealer ,chat the storeman up nicely and he will print you off the parts picture so you some idea where it goes ,this vehicle is so oil that nothing is complicated about this motor as i repaired a 350 1989 model last week and apart from getting the plugs out after they had been in for 15 yrs their was nothing i found difficult ,just big and heavy with its twin rear wheels and a complete brake rebuild as well .Still think a ford transit diesel is a better motor though because at our fuel prices here in europe ? need i say more

Posted on Mar 30, 2012

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Do you still have parts and manuals for a Diawa PR15 procaster

Parts are here, e.g...

or here...

Schematics are here...

Mar 15, 2017 | Music

1 Answer

Daiwa AB2650 need parts to fix Drag assembly

try contacting DAIWA we do not know what part you might need

May 27, 2016 | Daiwa Sport & Outdoor - Others

1 Answer

Need the manual for a diawa ps2 2B

Try google. I typed in "diawa ps2 2b" and found this site for you.

May 27, 2016 | Fishing

1 Answer

Mcculloch 335 oiler for chain not giving oil out

That is because it is full of wood and soil debris. You'll need to completely disassemble and clean the pump, oil lines, etc. If you do not know how to perform this maintenance, then I recommend contacting your local authorized service center for assistance.

You may contact the manufacturer, download manuals, check fuel/oil ratios, order parts, find your local service center, and view other resources using these links:

Contact us
User manuals
What is the correct fuel mixture for McCulloch products Chainsaw Trimmer...
McCulloch Service

I trust this information has proven beneficial.


Feb 22, 2013 | McCulloch Garden

1 Answer

Need manual for daiwa pt 10e bait casting reel

I recommend you call Daiwa and ask them to send you one for it. Contact information is available at the following link:


Hope this helps



Apr 28, 2011 | Sport & Outdoor - Others

1 Answer

REplaced belt ok but pulleys look out of alignment - any remedy?

You need to disassemble parts and then reassemble them properly.use greese oil for better performance

Mar 12, 2011 | Hotpoint First Edition FEW12 Front Load...

1 Answer

I had asked Fixya Maytag Dryer expert about a chirping noise.

When he siad to use oil he may have tried to get you to figure out what was causeing the problem. If you oiled each bearing one at a time you would have found out exactly where the noise was comming from, Then you would have to see it the bearing was bad? or could be lubed with a greese gun and see if it would last. This is a common way to trouble shoot so you don't buy all the parts that you oiled, so if you know which part made the noise use a heavier oil or a synthetic greese to lube the part and see if it works. If it does not it coust you nothing for parts or labor except your own. A Service Tech would have charge $80.00 just to come out plust parts and labor. So now you know what part is defective so if you need more help Just ask!

Jul 09, 2009 | Dryers

Not finding what you are looking for?
Fishing Logo

Related Topics:

974 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fishing Experts

ray gallant

Level 3 Expert

66486 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

30873 Answers

Steve P
Steve P

Level 3 Expert

3712 Answers

Are you a Fishing Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides