Question about Electrolux Washing Machines

2 Answers

My Electrolux EWF10741 washer spin is getting very noisy, what can I do?

Washier is about 4 yo. Lately the spin cycle has been getting very noisy, much more than before. Sounds like a bearing going bad?

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Electrolux Master
  • 1,585 Answers

Highly likely u need a bearing kit

Posted on Apr 26, 2015

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Electrolux Master
  • 17,130 Answers

Yes! it is highly likely that the water seal is bad and the bearing assembly is tight and the bearing is devoid of any lubrication making the spinning noisy.
Removing and reset the mechanism with proper lubrication could reduce the noise, but if the bearing is bad then it must replaced.

Posted on May 04, 2015

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Electrolux screaching noise on spin cycle


Hello friend, thank you for your inquiry!

Based off the information you have provided you are hearing a loud screeching noise during the spin cycle on your Electrolux washer. You will hear a certain amount of motor whine during the spin cycle this is a normal operation of your appliance. -Matt

Aug 23, 2014 | Electrolux EWFLS70JRR Energy Star Front...

1 Answer

My electrolux front load washer model number, EWFLW65HIWO, gets to the spin cycle and spins slowly. At minute 4, it stops, never entering the super fast spinning. However, if I put the washer on the Spin...


Sounds like the timer and control board are not communicating correctly and efficiently when in a normal cycle. You would need a professional to diagnose the control board and see if that is the only part needing replacement.

Dec 26, 2012 | Washing Machines

1 Answer

Noisy on spin cycle "rattling"


Hi,
When my washer did that, I found that the shocks that hold the tub were bad...

Check out this tip I wrote about the noise and vibration that front loadwashers can make..

Washer Problems Washer noise when spinning
heatman101

Mar 20, 2011 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Perfect level sounds very strange


Check the leveling feet on your machine. With the machine turned off, and with a small carpenter's level, check to make sure the machine is level front to back and side to side. Then give the machine a shake in each direction to make sure that the feet (which are adjustable). If the machine wobbles-even a little bit- adjust the feet until all 4 feet are in contact with the floor and the machine fails to wobble when pushed.
Rerun a load and see if the machine has stopped sending morse code...
you can also make sure that the fill hoses aren't banging into the machine or the wall during the cycle.
let me know if you have success!

Jun 01, 2010 | Washing Machines

1 Answer

Ariston Margarita 2000 NOISY spin cycle....


Remove drum drive belt, and spin drum by hand, if there is any resistance,. or it feels rough or noisy, the the main bearigs have probably failed.
If it is o/k then check motor for worn or noisy bearings,
Please rate my solution.
Thanks.

Jul 24, 2009 | Ariston Technologies Ariston AWD12 Front...

1 Answer

Hotpoint wma76 front load very noisy on spin cycle


If the machine is only noisy during the spin cycle then it is probably not the bearings, more likely it is probably the same issue I had. There is a large weight attached to the top of the drum, in my case it was loose. A simple fix, remove the lid and tighten the three bolts. The lid is removed using a T20 star key, you can buy these at places like Homebase or B&Q (about £7.50 for a set of 10 different sizes). There are two little plastic lugs on the side of the lid, the screws are behind these, remove them and then pull the lid forward and up. The weight is obvious, it looks like an odd shaped brick and is bolted down with three bolts. In my case the front one was loose.

Oct 13, 2008 | Hotpoint WMA76 Front Load Washer

1 Answer

Noisy Washer


may be blocked outlet pipe or depending on the model a noisy drive belt, check for blockage if belt do not worry. Regards engineer

Jul 25, 2007 | Maytag Performa PAV2200

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

579 people viewed this question

Ask a Question

Usually answered in minutes!

Top Electrolux Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

jimorris77

Level 3 Expert

411 Answers

Poppa Maddo
Poppa Maddo

Level 2 Expert

372 Answers

Are you an Electrolux Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...